Question about Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

Sears Kenmore washer agitates properly but won't spin

I have a Kenmore top loading washer about 7 years old (model 110.49182992) that washes O.K. but when it is supposed to go to the spin cycle it only make a strange noise while the water is draining and sounds like it is going to the spin cycle but the tub doesn't move at all.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question@#!$$^$#@

Posted on Oct 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Washer Will Not spin


replace door switch ,good luck APPLIANCES R EN

Mar 03, 2013 | Kenmore Washing Machines

3 Answers

My kenmore 800 washer is off cycle for example when i start a load of clothes it starts agitating before filling, and doesn't always spin all the water out of the clothes


I have the exact same problem with my Kenmore 800 top loader, Model # 110.29822800. It is only 1.5 years old. Any suggestions?

Jan 19, 2011 | Kenmore 22422 Top Load Washer

1 Answer

Washer is not rotating fully during wash cycle


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.######) and you'll see a list of major sub-components with diagrams and parts.

Some Kenmore washers have a two piece agitator. The lower section will rotate back and forth both ways.

The top section has "agitate Dogs" that allow it to rotate only one way (to keep the clothes moving downward.

If yours has a two piece agitator there shouldn't be a problem.


Oct 18, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Doesn't agitate and spin cycle work when reset


you have a worn motor coupler
you can order a new one at sears
and its a ver y easy repair

Oct 06, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

My washing machine will not spin or agitate


Does the washing machine empty as normal? I am assuming it does and think the brushes on the motor could be worn. Hope this helps.

Jan 19, 2009 | Kenmore 24932 Top Load Washer

1 Answer

Kenmore washer 80 series


you need to check the lid switch, does it click. you can unplug and then remove the 2 screws to see it, if it looks like it is coming apart then the lid switch is bad. you can buy one for about $40 or so dollars. i am assuming it doesn't spin either.

Dec 19, 2008 | Kenmore 24032\24036 Top Load Washer

2 Answers

Kenmore 80 series top loading washer won't agitate and is noisy


Sounds like u may have broken the coupler gear between the motor and transmission... the replaced the belt with these gears on this model... But should go fill & pumb water out and NOT spin Or agitate... IF these gears or broke or stripped... heavy loads like u  said would do this... recheck and see if wash will pumb water out But will NOT agitate or spin.. IF so the above is your problem  and is Not to hard to repair  or much money

Below is a pic with the motor remove the white piece in the middle is 1/2 of the gear system with a rubber piece in the middle (not there)  and another like gear on the motor
sounds like these gears may be broken or stripped on your washer

Oct 27, 2007 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Kenmore 3.8 cu. ft. HE3 Front Load Washer Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2180 Answers

fordexpert

Level 3 Expert

5520 Answers

Mike Squire

Level 2 Expert

402 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...