Question about Farberware New Classic Alert Oven Probe Kitchen Cooking Digital Thermometer

1 Answer

Oven thermometer only displays lo

Why is the screen not displaying the temp only says lo and I put a new battery in

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just had that LO reading. Pulled back on the tip of the thermometer. Seems I had it inserted into my turkey too far. Probably up against a bone or too close to the center. Good luck! Happy Thanksgiving 2016!

Posted on Nov 24, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Keep gettinG LO thermometer when taking my son's temp. but quite Ok with others


The actual temperature may be below the calibrated range of the thermometer.

Sep 22, 2016 | Braun Irt 4520 Thermoscan Ear Thermometer

1 Answer

Why hasn't the oven reached the set temp when the buzzer sounds indicating desired temp has been reached?


What are you using to measure the temperature of the oven? If you using a typical round oven thermometer, the reason is that your thermometer response is slow. It takes about 20 minutes for those thermometers to reach and display the actual temperature, and your oven is probably reaching it's set temperature in about 10 minutes. You really need an electronic thermometer or at least one of those liquid thermometers which you can sometimes find at Ace Hardware or True Value Hardware stores.

Apr 29, 2015 | Kenmore Kitchen Ranges

1 Answer

I have a Jenn Air JJW9830DDP double oven electric, and the temperature in the oven is about 100' less than what it reads on the display. I tested the temp sensor and it ready 1073 ohms. Any s


Well, your temp sensors can still be bad. If not, there's always a new control board you buy!

However, I wouldn't drink water from that oasis without making ABSOLUTELY sure I'm not seeing a mirage.

The only common denominators between your upper and lower oven temp readings is the firmware and the oven thermometer you are using to visually check the temps.
What type of thermometer are you using to check your oven temperatures with?
If it's not a digital thermometer used specifically for testing ovens, you might just be leading leading yourself astray.
You need a calibrated thermometer. If I don't have a calibrated digital thermometer on me, I use two or three oven thermometers (the dial type) and average the readings.
It's the only way to be as close as possible with a digital probe.

If you have thoroughly verified that your oven is in fact not reading the correct temperature, then you can adjust it +/- 35 degrees F via your oven's control panel.
To adjust the oven temperature:
1 - Press Setup pad.
2 - Select the down arrow to scroll to the next screen.
3 - Select Temp Adjust using the Quickset pads.
4 - Select upper or lower oven (select models).
-"Set temperature offset using the Upper Set Knob" is displayed.
5 - Enter the desired temperature change using the Set knob.
The temperature can be increased or decreased up to 35 degrees.
The temp. change is displayed at the top of the window.
6 - Press the Set knob to accept the change.

Now, if you are still worried about the temp. reading being off, replace both the upper and lower temp sensors. That's all you can do besides replace the main board.

Oct 24, 2014 | Jenn-Air JJW9830D Electric Double Oven

1 Answer

Braun thermoscan 6022


It's probable that it needs a new lens filter or the filter needs cleaning. I have no idea how to remove the filter but it probably clips or screws off the bit that goes in the ear.
Quite frankly the device is at best unreliable, it measures infra-red in the ear, great in theory but not very reliable in practice. I would use a different thermometer.

May 15, 2014 | Home

1 Answer

Temperature fluctuates in bake setting. Temp on display does not match real oven temperature.


as long as your measured temperature is within 15-25 degrees of shown temp, then it should be ok. remember the temp in the oven will be different from top to bottom.

Dec 11, 2011 | Dacor Epicure ERD30 Dual Fuel (Electric...

1 Answer

The teamperature on the digital display can say 350 degrees and the oven thermatore that is located in the oven reads 310. Does this oven need to be calibrated? The oven is 6 years old.


The thermometer that hang on rack are Whooly inaccurate. A good one is the TAYLOR brand. As long as things bake within recipe time no adjustment needed but to do it;
  1. Press BAKE

  2. Select the maximum temp. depending on model it either 500 or 550

  3. Quickly (within 5-seconds of setting 550) press and hold the BAKE button approximately 5-15 seconds until "00" or the previously entered temperature adjustment is displayed.

    Pressing longer could cause an F0, F1 or F7 error to be displayed.

  4. Press the UP/DOWN arrow button to change the oven temperature in 5° increments to a maximum of +/- 35°

  5. Press the CLEAR or OFF button to return to normal operation.
But before doing that i suggest a new high quality thermometer that you hang on oven rack

Aug 12, 2011 | Ovens

2 Answers

I have this model and the outdoor temp sensor isnt working, and yes both modules have brand new batteries in them. what should i do to get the outdoor temp sensor to work.


My outside display stopped working, but the inside display still worked. I found that one of the two batteries in the inside unit was almost all the way dead. Once I replaced both batteries the outside display worked. I also checked the batteries in the outside unit. After all batteries were installed, I pushed the small button that is inside the battery compartment on the outdoor unit. It's now working perfect..

Oct 10, 2010 | Acu-Rite Acurite Wireless Weather...

1 Answer

Hotpoint oven


does the display go to 425 or are you putting a dial thermometer in it?is the new control doing the same thing as the old control?

Oct 23, 2008 | Hotpoint RGB745 Gas Kitchen Range

1 Answer

Preheating


hummmm this sounds similar to what is happening to me. I am praying someone will have a solution, I don't want to have to explain to my daughter who is going to be 4 tomorrow, why I can't bake her cake.

May 12, 2008 | Ovens

Not finding what you are looking for?
Farberware New Classic Alert Oven Probe Kitchen Cooking Digital Thermometer Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Farberware Home Experts

Donni Steen

Level 3 Expert

659 Answers

Tom Chichester

Level 3 Expert

33326 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Farberware Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...