Question about JVC KW-NT50HDT Navigation receiver

Open Question

I need to know how to reset a jvc kw-nt50hdt. The touch screen is not responding properly.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: KW-AVX710 Screen stays black (off) untill I hit the open button

So I decided to verify all the connections after I got frustrated with it. Everything was correct except one wire that was on the new harness I got that for my car that was labeled "12V fused" (supposedly the key on power source). I tested it with my volt meter and it did not have power at any time, even with the key on. The constant power source wire was hooked up so that's why I was able to open the face and eject CD's and DVD's but not do anything else (like when your ignition is off). So I ran a new wire from my fuse panel and everything works now. Just like my Thermodynamcis professor says "nullius in verba" (take no one's word for it), just because the wire was labeled doesn't mean it's right! Hope this helps.....

Posted on May 26, 2009

josetejas
  • 300 Answers

SOURCE: jvc kw-nx7000 parking break by passed still no video

Connect the parking break as recommended. Then check whether the video appears when parked. If not, send it for service. If yes, then the bipass was not done correctly.

Posted on Jan 22, 2010

  • 16 Answers

SOURCE: JVC KW-AVX800

hi , those units have the touchscreen conector in the lower side of the screen , it happends lose one or 2 conductive tracks from the flex to the screen it can be fixed with a conductive pen , can check visualy where is the open loop n'd aplly just few conductive ink to restore the circuit ,

Posted on Dec 11, 2010

  • 1 Answer

SOURCE: the touch screen problems.malfunction.touch screen

if the screen gets wet it will corrode at the data wire and not pick up a signal

Posted on Jul 10, 2011

  • 7 Answers

SOURCE: I have a JVC KW-AVX840

You can try disconnecting the battery for like 15 seconds and it should restart your stereo and might work again good luck!

Posted on Sep 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

JVC KW-AV60 BT touch screen car audio touch screen not responding


is there a diagnostic setting for touchscreen calibration. Could have gone bad. you are probably still in warranty, take that bad boy back

Mar 12, 2014 | JVC KW-AVX800 CD Player

1 Answer

Problem with JVC KW-NX7000 Car bluetooth and gps messeage.


The bluetooth headset may not be compatible for the GPS reciever.. Check for the configurations for bluetooth.. and then install..

Apr 01, 2012 | JVC KW-NX7000 Car GPS Receiver

1 Answer

The touch screen problems.malfunction.touch screen lost function even touch.model no exad kw avx-800


if the screen gets wet it will corrode at the data wire and not pick up a signal

Jun 28, 2011 | JVC KW-AVX800 CD Player

1 Answer

Touchscreen won't respond when touched. All other functions of unit work. Do the screens just go bad and where/who repairs this?


you may need to reset the unit. after that do a screen recalibration. if that doesn't work the ribbon cable could be broke

Jan 26, 2010 | JVC KW-AVX710 Car Video Player

2 Answers

JVC KW-AVX800


hi , those units have the touchscreen conector in the lower side of the screen , it happends lose one or 2 conductive tracks from the flex to the screen it can be fixed with a conductive pen , can check visualy where is the open loop n'd aplly just few conductive ink to restore the circuit ,

Feb 19, 2008 | JVC KW-AVX800 CD Player

Not finding what you are looking for?
JVC KW-NT50HDT Navigation receiver Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5047 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a JVC Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...