Question about Televison & Video
If you have the led light on or blinking just replace the mainboard, if you dont have any led light at all, then you need to replace the powerboard.
Posted on May 27, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 18, 2016 | JVC Televison & Video
Jan 11, 2016 | JVC Televison & Video
Mar 18, 2017 | Televison & Video
Mar 08, 2012 | JVC LT-42X688 46 in. LCD HDTV
Mar 06, 2012 | JVC LT Televison & Video
You may power on the unit in the dark room and directly shine the
flashlight to the LCD monitor. You will barely see an image or picture because
the fault is either the inverter
board or the lamp (backlight).
You may isolate the problem but it will require you some tools and test instruments.
Also, you must know some basic safety
precaution in electronics
Best way to find the faulty parts between the two you need to test
the output of the inverter board. You can do it
using the voltmeter or if does not available you may
substitute a two 12v car bulb
in series to the output of the inverter board. Powering on the unit and
look if the bulb will glow or not.
Yes, your lamp was busted. No, the inverter board fail.
You may look online for the replacement of defective parts. http://shop.ebay.com/i.html?_nkw=LT-26C31BJE&_sacat=0&_odkw=42RV600E&_osacat=0&_trksid=p3286.c0.m270.l1313
Hope I helped you.
Have a nice day!
Thanks for using Fixya.
Mar 02, 2011 | JVC Televison & Video
Mar 17, 2009 | JVC LT-32P679 32 in. LCD TV
Dec 27, 2007 | Televison & Video
101 people viewed this question
Usually answered in minutes!