Question about Watches
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the mode button controls the different functions of the watch. time, alarm time, stopwatch, timeset, alarmset, in a repeating cycle. Make sure you are on the time function (seconds ticking and changing every second, but not flashing twice per second. This is the normal mode that shows the time.
A press of the lap/reset button (labeled) will show the alarm time, Unpress will show the time of day. Press again toshow the alarm time. Press and hold the lap/reset button will show the alarm time again, but it will hold there. While holding this lap/reset button, press the start/stop button (labeled). This will turn on (or off) the alarm (tiny indicator). Press this start/stop button repeatedly (while still holding the lap/reset button and you will see the indicator turning on and off with each press. Stop this button pressing with the indicator OFF, let up on the lap/reset button, and the time will return to the screen. The alarm will now be OFF.
Posted on Sep 09, 2009
SOURCE: athletic works watch
I just bought an Athletic Works watch at WalMart that is identical to the Aquatech watch I bought there some years ago. My band got hard and cracked so I needed to buy a new one as the band is not available. For $9 the entire watch is probably cheaper than a band. I used the instructions from my Aquatech to set the stuff on the AW. I found the instructions on the internet. Here is one site that has them.
Give it a try.
Posted on Mar 04, 2009
Maddening, isn't it? Fortunately the solution is here:
1 There should be four buttons: mode, reset, start and light. Find the mode button and press it three times until it is in the set time mode.
2 Find the reset button, which usually is located on the bottom right side of the watch face, and hold it until the time starts blinking.
3 Press the start button to change minutes.
4 Press the reset button again to switch to hours.You will know it worked when the hour starts blinking instead of the minutes.
5 Press the start button to change the hour. The watch can handle two modes: standard and military. As you press start, the hour will change from AM to PM, noted by an "A" or a "P" in the top right. When you get through 24 hours, the watch will change to military time and an "H" will be displayed instead of "A" or "P." Keep pressing start to go through another 24-hour cycle and it will revert back to standard time.
Posted on Jan 05, 2010
Tips for a great answer:
Jan 29, 2018 | The Watches
Dec 19, 2016 | Watches
Aug 14, 2010 | Seiko Super Athlete 300 Memory Athletic...
Aug 11, 2010 | Seiko Super Athlete 300 Memory Athletic...
Jul 17, 2010 | Swatch Irony watch
Feb 15, 2010 | Watches
Apr 30, 2009 | Watches
Sep 23, 2008 | Watches
19 people viewed this question
Usually answered in minutes!