Question about Texas Instruments TI-5045 SVC Calculator

Open Question

The paper stopped feeding abruptly on my TI-5160II

I was addling figures for a client for sales tax reporting, one minute the paper was feeding fine, the next it wasn't feeding at all. I did nothing different, heard nothing break and all the buttons and rollers seem to be operating fine. I have no idea what it could be, and since we live in a very rural area, have nowhere to take it to be fixed. I hate to throw it out as it must be a simple fix!

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: paper feed

Frankly, between paying for your Premium Assistance Plan or paying a professional small electronics repairman, if I could find one, I figured it would save time and money just to buy a new calculator. I dislike this solution but I don't think I have much choice. I can't find a repairman anywhere. Some services have just become obsolete and that's a shame. Because of "planned obsolescence", I, as well as most other Amerians, now put more items in landfills. Okay, I'll get off my soapbox now. Thank you for your response and for offering a website where people can ask questions of this nature.

Posted on Dec 04, 2008

  • 1 Answer

SOURCE: raise number to given power

cant solve simple problems

Posted on May 05, 2009

  • 566 Answers

SOURCE: calculating sales tax

Try this:

If you want to deduct the tax amount from a number enter the number and press Tax- .
i.e Enter 3150. Then press Tax-. 3000 is displayed.

5.gif
If you press Tax- again 150 is shown. This is the tax amount

Posted on Aug 06, 2009

  • 102366 Answers

SOURCE: Won't turn on. HELP!

TI calculators have an annoying habit of dimming the screen when the batteries are changed so that it appears as if the calculator isn't turning on. Turn the calculator on (or at least press the ON key). Press and release the 2ND key. Press and hold the Up-arrow key for a few seconds and see whether the screen becomes legible.

If this doesn't work, append a comment to this post and we'll go on to the next step.

Posted on Jul 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i get a total daily sales and sales tax report each day?


You enter a report code on most registers and it will allow you to print many types of reports. Most instructions are here:
https://the-checkout-tech.com/cashregisters.php

Apr 16, 2017 | Retail Supplies

1 Answer

How to use barcode scnner for zq-ecr800


To create or edit commodity data can be through PC software and ECR keyboard;
To modify system configurations through PC software makes operation more convenient and clear
Powerful sale functions with multi selling ways and supports change price, holding bill, refund etc
Support restaurant functions: Dishes with tastes option, meal set selling functions are available
Powerful report functions support users to create reports at any time period and in many useful forms such as PTD report, stock report, shortage report, configuration report etc
Member management makes marketing easier
Multi-tax option provides local tax solution

ZQ ECR800

Sep 12, 2015 | Computers & Internet

1 Answer

No longer adding tax to food sales


YOU have to link the tax to all taxable departments

Feb 11, 2014 | Sharp XE-A404 PC Desktop

1 Answer

Preprinted 4 part paper crunching up when being printed in epson lq680 printer


Mustafa:

The printer is not meant to use multi-copy carbon invoices. The cause of your problem is the double-feed prevention pad below the paper pickup roller. When the first form is fed, the double feed prevention pad will stop multiple paper feeds. With multi-page carbons, the paper feed roller is trying to feed the form, and is pulling the top page of the form into the feed rollers while the double-feed prevention pad is stopping the bottom form from feeding and the top and bottom pages are sliding because of the carbon paper between the sheets. The only solution that I know of is to buy a printer with a tractor feed and pre-printed fan-fold forms with tractor feed strips on the sides of the forms.

Oct 13, 2012 | Epson LQ 680 Matrix Printer

1 Answer

Message appears "Paper jam".


Paper jams can be true or false. A false paper jam occurs when the error message displays, but no jammed paper is in the product. The following solutions apply to both true and false paper jam errors.

Print a self-test report Use the following steps to print a self-test report.
  1. Load plain white paper in the input tray.
  2. Press Setup , and then press 2 . The Print Report menu displays.
  3. Press 1 to select and print a Self-Test Report
Solution one: Clear the paper jam Step one: Remove loose paper from the tray Remove any loose sheets of paper from the input tray and the output tray.

Step two: Clear the jam from the back of the All-in-One
  1. Figure 2: Remove the rear access doorc01562020.gif
  2. Gently pull any jammed paper out of the rollers inside the product.
  3. Carefully remove any scraps of paper that are still stuck in the product.
  4. Reattach the rear access door. Insert the two posts on the right side of the door into the holes on the product, and then push the door in until it snaps into place.
  5. Reconnect the power cord to the back of the product, and then press the Power button (c01602202.gif ) to turn on the product.
Step three: Clear the jam from the front of the All-in-One Follow these steps to remove the paper jam from the front of the product.
  1. Without opening the cartridge access door, check the tray for jammed paper that you cannot remove from the back.
  2. If you see jammed paper, gently pull it out.
Step four: Print a self-test report
  • If the issue persists , continue with the next solution.
Solution two: Make sure that the carriage can move freely Follow these steps to make sure that the carriage can move freely. Step one: Check the paper path
  1. Check for any paper or object that might be stopping the carriage. Figure 4: Example of paper stuck in cartridge access areac01950807.gif
  2. Remove any paper or objects you find.
  3. Reach inside the product, and then manually move the carriage.
    • If the carriage is stuck on the right side , move the carriage to the left side of the product.
    • If the carriage is stuck on the left side , move the carriage to the right side of the product.
    • If the carriage is stuck in the middle , move the carriage to the right.
  4. Remove any paper or obstructions found.
  5. Make sure that the carriage can move freely across the width of the product by gently pushing the carriage to the left, and then to the righ
Step two: Print a self-test report
  • If the issue persists , continue with the next solution.
  • If the self-test report does not print , continue with the next solution.
Solution three: Clean the rollers and the rear access door Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Follow these steps to clean the paper feed rollers inside the product. Step one: Clean the rollers
  1. Press the Power button (c01602202.gif ) to turn off the product.
  2. Disconnect the power cord from the back of the product.
  3. Press in the tab on the left side of the rear access door, and then pull the door away from the product to remove it. Figure 6: Remove the rear access doorc01562020.gif
  4. Lightly dampen a clean, lint-free cloth with bottled or distilled water, and then squeeze any excess liquid from the cloth.
  5. Press the cloth against the rollers and rotate them upwards with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup. Figure 7: Rotate the paper feed rollersc00212278.jpg
  6. Make sure that the paper feed rollers on the rear access door are clean, free of paper bits, and rotate freely.
  7. Clean the surface and the rollers of the rear access door the same way you cleaned the large rollers inside the product.
  8. Replace the rear access door. Insert the two posts on the right of the door into the holes on the product, and then push the door in until it snaps into place.
Solution four: Service the product

Aug 08, 2011 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

How do i add % to money like a item is 22.5 and sails tax is 7% is it like 22.50 x7% or + 7% how do i do this


Sales tax is simply a digital factor of a dollar, so 7% would be 7 cents on each dollar. the way to figure 7% sales tax on $22.50 would be: $22.50 X 0.07 = $1.58 for a total of $24.08.

Jul 17, 2011 | Office Equipment & Supplies

1 Answer

Service tax calculated and reports


You will get to buy the standard sofwares for commuting the sales tax values. This sofware must be installed so that you will get all the reports as required by your tax authority. Please ask any of the sofware dealers in your area, or the tally dealer to install to yourr system the software and teach you how to enter the fields.
Hope you try this out. Good day

Jul 29, 2010 | Tally T2250 Matrix Printer

1 Answer

Calculating sales tax


Try this:

If you want to deduct the tax amount from a number enter the number and press Tax- .
i.e Enter 3150. Then press Tax-. 3000 is displayed.

5.gif
If you press Tax- again 150 is shown. This is the tax amount

Jul 02, 2009 | Casio MS-80TE Calculator

1 Answer

Lost manual, How do I figure sales tax?


press AC
while holding AC press SET/%
while holding SET/% release AC
your screen should read SET on top
now press TAX+(TAX RATE)
enter tax rate 6.25
then press the SET% again,
you just changed your tax rate

Jul 02, 2009 | Casio MS-80TV Scientific Calculator

2 Answers

Trouble printing a thicker form


Hi,
I have come accross this problem on a number of sites. It may be the Paper Out sensor. It works by emitting light from one half of the sensor reflectiong it of the paer and picking it up with the other half of the sensor. When no paper is present, the light cannot reflect and hense a paper out error is reported. I have seen this error occur when paper with dark backing ( like that for bank and tax forms ) is used.

Aido

Jan 09, 2008 | IBM 6400 Matrix Printer

Not finding what you are looking for?
Texas Instruments TI-5045 SVC Calculator Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Texas Instruments Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Stevan Milanovic

Level 2 Expert

261 Answers

Are you a Texas Instruments Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...