Zenith model number Pdp50t10000 power supply eax61397101/10 p/n eay60968701 I have no picture I have 4.8 volts going to Y sustain and 5.1 going to control board think its called that my Vs is reading 66 and my Va is reading 100 where should I start my troubleshooting? I will have my details during the discussion
An expert who has achieved level 3 by getting 1000 points
You should start for the Vs & Va voltages itself. The details to these voltages will be marked on the panel label itself. These two voltages should be more specific than other voltages, especially to Plasma displays. More variations; say; + or - 1%, can effect the display drastically. To get more details about this, you have to download the repair manual to this set, and refer its schematic diagram. If you wish to get some details, check the site linked here. http://electronicshelponline.blogspot.com/ Pull up older posts.
Posted on Dec 25, 2013
Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!
Posted on Jan 02, 2017
SOURCE: p50hdtv10a y-sustain and pcb
I had this problem with a different brand plasma and it turned out to be cracked or missing solder on the power board lead to y sustain. I removed the power board, desoldered the connection, clean it up and then resoldered the connection. Everything works great now.
Posted on Sep 27, 2009
SOURCE: I have 02 plasma
The fault lies in the energy sustain boards, also called sustain boards. X-sus and Y-sus/Z-sus are the to sustain boards. If your meter has capacitance measurement capability, test the caps to see if any of them are fried. Should read OL or infinite if its bad. Try it and let me know.
Posted on Aug 24, 2010
SOURCE: 42"philips plasma 7 red blinking light.
7 blinks Driver SOS 2 SU / SD / SS Boards
(SC floating voltage area)
This is the fault indication meant by 7 blinks of standby light. Just visit this site 'Electro-help' Faults with plasma TVs are described in detail. Check this link and select the site. Pull up older posts there.
Posted on Jul 19, 2012
Dec 23, 2016 | Zenith Televison & Video
Jan 02, 2008 | Zenith D60WLCD 60" Rear Projection...
Nov 09, 2016 | Zenith Televison & Video
Apr 09, 2012 | Zenith Televison & Video
Jun 09, 2009 | Zenith IQB32B42W 32" TV
Aug 08, 2008 | Zenith Z50PX2D 50 in. Plasma HDTV
Feb 14, 2008 | Zenith IQB60M92W 60" Rear Projection...
Dec 26, 2007 | Zenith P42W46X 42 in. Plasma EDTV
Aug 26, 2007 | Zenith A25A23W 25" TV
48 people viewed this question
Usually answered in minutes!
×