Question about HP PSC 2210 All-In-One InkJet Printer

4 Answers

Window vista my hp 2210 all in one is not allow me to scan my work because i have window vista

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 33 Answers
Re: window vista

Go to


Choose which model of the 2210 all in one series you have, click on Software and Driver Downloads and then click on the button that says Check.


This will check to see that you have the most recent version of the driver.

Posted on Oct 17, 2007

Re: window vista

1) Open the HP Director software. Do not click anything else on your screen until Step 2 is completed.
2) Press the Alt key and the Space bar together
3) Select Minimize from the menu that displays in the upper left corner of the window.
If necessary, click it again until HP Director minimizes.
4) The HP Director software now appears as an item on the Task Bar.
5) Click HP Director on the Task Bar. The software opens and displays normally.
6) Repeat the steps above each time the HP Director software is used.

Posted on Nov 29, 2007

Re: window vista

With vista,the scan button is inop(at least it is on my psc 2110).All scanning is now accompished from the windows photo gallery.

Posted on Nov 02, 2007

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 156 Answers
Re: window vista

Insert Printer Driver Disk And Uninstall The Printer Drivercompletely.Dont Remove It From Control Panel. You May Use UninstallerSoftware.Here's The Link
.Installthis and remove printer driver. Delete temp and prefetch filesas wellif you wish. Disconnect Ur printer from the computer and turnit off andthen disconnect the power cable. Press n hold the POWER BUTTON on the printer for 30 seconds so that static is released. Disconnect all the cables from the back of the computer and then Press n hold the POWER BUTTON on the Computer for 30 seconds. Restart Your system and hook up the printer and visit the following website
DOWNLOAD AND INSTALL the latest driver software and firmware.
Restart Your System.
Issue Would Be Resolved..

Plz Rate The Solution Accordingly....

Posted on May 23, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I press scan and start. It says "scanning to e-mail" and then does nothing,

What software are you using to scan? the hp suite ? 
Try using the windows photo galley and import the image from scaner...
good luck 
a little microsoft tutorial....

Aug 23, 2011 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Unable to scan after install windows vista home premium w sp 1

You don't have bi-directional communication between the all-in-one and the computer. (If you launch the scan command from the computer, Windows Photo Gallery, Paint or a third-party program). Solve this with a new USB cable. If you are using a print server or USB hub, try a direct connection.

If you can't launch the scanner from the buttons on the all-in-one, that is due to the fact that you are using the driver in the Vista OS. HP does not offer a full-feature software for this printer for Vista.

In Paint, to acquire a scan: File > Import from Camera or Scanner, Choose Scanner then New scan.

I hope this helps.

Cindy Wells

May 02, 2010 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

HP psc 2210 all-in-on not printing.

A full feature software and driver package for Windows Vista is not available for your product. However, Vista contains a basic driver...

Click on your Operating System link. Follow the instructions. Good luck.

Dec 01, 2009 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Windows 7


Kindly go through the below link it has the patch for your printer to work with Windows 7

Let me know if this will help all the best


Nov 29, 2009 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Scanner does not work but printer does

The solution will depend on your OS and setup. If you have Windows 7, you need to scan with either Windows Scan and Fax or Paint and then import from the scanner. I believe this applies in Vista as well. For older versions of Windows or other operating systems, find the drivers and software here:

These tips will work with a USB connection.If you have a print server, check the details for that separately.

I hope this helps.

Cindy Wells

Nov 23, 2009 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

On my hp all in one model 2210 printer I press scan, Options, Microsoft word,enter and start. the printer indicates "no connection" even though printer is connected to computer.

The driver is not compatible with Windows Vista. The printer is considered a 'legacy' product and there are no upgrades to the driver after Win XP

I found this out after buying a new MS Vista laptop.

You can use MSPAINT or PRINTIRIS (maybe others too) to activate a scan from within the software. You may need to do some size formatting to the scan afterwards. Also you can try "Bullzip PDF Printer" (google it) to print the document or picture in a saveable PDF format for printing at your leisure.

Nov 17, 2009 | HP PSC 2210 All-In-One InkJet Printer

2 Answers

Can't get scanner to work

Try oprning up Windows Photo Gallery, then File tab at top, then click on Import from Scanner or Camera.

The HP should come up as an option, so click on it.

I found that with upgrade to Vista, the actual SCAN button on the HP 2210 did not work -- but this back door through Photo Gallery lets me scan and import the scan as a jpg file.


Feb 21, 2009 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Hp psc 2210 all in one printer

You can't load the software that came with the printer.

HP has a Vista page for your printer. Here is a link: PSC2210 Using Vista

Basically, you need to uninstall the software AND delete the printer from your computer. Disconnect your USB cable. Power up your printer. Connect the USB cable.

The above link gives some workarounds for scanning and importing images.

Nov 07, 2008 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Hp 2210 all-in-one wan't scan

Hi Bobhp,

I am sorry to inform you that drivers for Vista is not available for your printer.

Still you can print and scan from Vista, please click on the web link given below and perform the steps as provided in the web page.

This will fix the issue.
Have a great day!

Jan 21, 2008 | HP PSC 2210 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 2210 All-In-One InkJet Printer Logo

949 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

94039 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides