Question about Rand Mcnally Intelliroute TND-520 LM Truck GPS

1 Answer

Intelliroute 520 wont connect to my pc

I try to connect the 520 to my laptop and desktop, but it is not being recognized. I am unable to complete the installation of the drivers due to it not connecting. Any help is much appreciated.

Posted by on

Ad

1 Answer

  • Official Brand Answer
  • 29 Answers

The answer to this question and many others can be found in the FAQ section on our support page at www.randmcnally.com/support. Additionally, for instructional videos on many of the TND & RVND features please visit the Rand McNally You Tube page at www.youtube.com/randmcnallyonline.

To troubleshoot a connectivity issue please try the following:

  1. Ensure the cable is secure on the device and computer. Disconnect and reconnect the device.
  2. If still not connecting and the cable is secure press the rest on the back of the device while connected to the computer.
  3. If a reset does not work then disconnect the device from the computer, wait at least 10 seconds and try another USB port on the computer.
  4. If another USB port does not resolve the issue disconnect the device, restart your computer, then connect the device.
  5. If all the above fails you can Reinstall the Device Driver. Navigate to the Device Manager on your computer. Please note this will vary based on the operating system you are using. Once at the Device Manager screen locate Universal Serial Bus Controllers. Click the arrow/triangle to the left of the Universal Serial Bus Controllers to expand the drop down list. If the device driver is the issue one of the items listed will say Unknown Device. Right click on Unknown Device and select uninstall. Once the uninstall has been completed, restart your computer with the device still connected.

If the device is not recognized after trying all these steps you will need to contact Technical Support for additional troubleshooting. To properly diagnose and correct a connectivity issue you will need to have the Rand McNally Dock Installed, a broadband internet connection and your device available to connect when instructed to do so. If these items are not available, we may not be able to resolve your issue.

Technical Support is available:
Monday - Friday
7am - 6pm (CST)
1-877-446-4863
TNDSupport@RandMcNally.com

Posted on Mar 31, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't find my update, where do I go?


I use a TOM TOM GPS, and they have an online Homepage that you can download any updates. I would imagine yours is the same. Look up the Rand TND520 homepage on the internet and look for a PC setup program. With the Tom Tom, I have to connect it to the PC with a USB cable and it automatically downloads and updates itself.

Sep 17, 2015 | Rand Mcnally intelliroute TND 520 LM 5"...

1 Answer

INSTRUCTION FOR UPDATE


All updates are completed using the Rand McNally Dock. The Rand McNally Dock is a software application you download and install on your PC/Mac. The software is free and can be found, along with instructions, at www.randmcnally.com/dock.

For a step by step tutorial please visit - http://www.randmcnally.com/support/faqs/updating-gps-software

Apr 16, 2014 | Rand Mcnally Intelliroute TND-520 LM Truck...

1 Answer

My computer does not reconize unit


To troubleshoot a connectivity issue please try the following:

  1. Ensure the cable is secure on the device and computer. Disconnect and reconnect the device.
  2. If still not connecting and the cable is secure press the rest on the back of the device while connected to the computer.
  3. If a reset does not work then disconnect the device from the computer, wait at least 10 seconds and try another USB port on the computer.
  4. If another USB port does not resolve the issue disconnect the device, restart your computer, then connect the device.
  5. If all the above fails you can Reinstall the Device Driver. Navigate to the Device Manager on your computer. Please note this will vary based on the operating system you are using. Once at the Device Manager screen locate Universal Serial Bus Controllers. Click the arrow/triangle to the left of the Universal Serial Bus Controllers to expand the drop down list. If the device driver is the issue one of the items listed will say Unknown Device. Right click on Unknown Device and select uninstall. Once the uninstall has been completed, restart your computer with the device still connected.

If the device is not recognized after trying all these steps you will need to contact Technical Support for additional troubleshooting.

Technical Support is available:
Monday - Friday
7am - 6pm (CST)
1-877-446-4863
TNDSupport@RandMcNally.com

Jan 05, 2014 | Rand Mcnally Intelliroute TND-520 LM Truck...

1 Answer

Dell desktop 520 doesnt recognize hard drive


Sounds like a bad hard drive or a BIOS problem. If you have access to a working PC, try connecting the hard drive (providing the connections match) and see if it's recognized. Try borrowing another hard drive to see if your machine recognizes that one. Your bios is a good place to begin.

Jan 02, 2014 | Dell Computers & Internet

1 Answer

Where can I find a driver for HP jornada 520 to Windows 7


You don't need drivers to link your HP Jornada 520 Pocket to your Desktop/Laptop Win 7 PC.

Download & refer to the "HP jornada 520 user manual" @ http://mikechannon.net/holdingfile/HP_JORNADA_520_User_manual_EN.pdf

All instructions are included at "Connecting to your Desktop PC" in the pdf file.

Hope it helps.

Mar 29, 2011 | Computers & Internet

1 Answer

Why wont board recognize 1gb ram stick? are there


The Crucial website has the compatible RAM for this system, and they have Dell's full specs on your desktop. If you are trying another brand you might have an incompatible stick of RAM.
Some PC's are very finicky about what RAM will work with them.
Here is the site (complete with price list) for your model.
http://www.crucial.com/upgrade/compatible-memory-for/Dell/OptiPlex%20GX260%20Series/list.html

If you are hesitant about buying another module, you might also want to test the module in another PC or try a different 1GB module in your computer.

Jan 01, 2011 | Dell OptiPlex GX260 PC Desktop

1 Answer

Laptop wont connect to wireless network but desktop is fine.


Perhaps, it just needed a new IP address. Simply rebooting the computer and resetting the IP Address of the computer took care of the issue.

or

That sounds like symptoms of Manufacturer & Windows drivers conflicting. Try uninstall the Manufacturer Drivers and let the windows ones do the work, and see how that goes down.

Apr 20, 2010 | HP Mini 1000 Netbook

1 Answer

Router wont recognize the laptop computer we bought but the desktop works fine


if your trying to connect wireless check for the following.

make sure the wireless switch on the laptop is on, check if the laptop if can see or view an available networks.

if your trying to connect wired check for the following.

check the ip address on the laptop, including the dns make sure that the status of the local area connection is connected.

Sep 05, 2008 | Belkin Computers & Internet

1 Answer

USB connectivity for Jornada 520


This may be a simple case of removing all the entire active sync directory. If you used to connect via serial+com it wont be detected on usb. Remove active sync from your pc via the add remove program feture, then reboot and re install. Then run the make a connection again from active sync. Hope this helps

Sep 12, 2005 | HP Jornada 520

Not finding what you are looking for?
Rand Mcnally Intelliroute TND-520 LM Truck GPS Logo

648 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rand Mcnally GPS Experts

Michael Vincent Cruz

Level 3 Expert

868 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

ray gallant

Level 3 Expert

44428 Answers

Are you a Rand Mcnally GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...