Question about AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

1 Answer

Emachine W1135 the tower will not send signal to the monitor....was occaisionally booting up...after several the monitor comes on then to blue flashing start button ....The tower runs and never boots to monitor...Monitor is good....checked all the power up cords...The tower never boots up....only one year from purchase...Been told it needs a new motherboard...but what about the power supply that could have blown it up? What would you try first...

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers
Re: emachine W1135

When ur starting the tower and it light are on and ur fan there is no problem with the power supply, i think that u rily need a new motherboard because ur board will not boot on start up..

Posted on Oct 17, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have emachines w3653 and the no signal keeps popping up

Are you still using the monitor that came with or have you replaced that monitor? The monitor or the cable connecting it to the tower could be faulty. If possible try connecting another cable between the monitor and the tower and then if you still get the no signal message, try another monitor altogether.

Sep 11, 2013 | E-Machines eMachines Desktop PC

1 Answer

My emachines tower flashes green and not send a signal to moniter

can you give more info if there is any sounds comming from the tower

Apr 08, 2012 | E-Machines eMachines Desktop PC

1 Answer

My emachine cuts off when the monitor trys to connect it says no signal it beeps and does it every time the monitor trys to connect

your VGA cord may have shortage, or your installed video card (if available) is not properly seated try to reseat it and clean the connectors w/ dry white clean eraser
give me feed back for more help!

Aug 21, 2011 | E-Machines eMachines Desktop PC

1 Answer

My computer will boot, I can hear the windows noises but the monitor will not come on at all. It keeps flashing. Also after a little bit the light on the tower starts flashing like the monitor does.


try to unplug and plug the cable from monitor to your pc, this is a problem of a connection. If it does not help, try some other cable which is working on another computer.

Flashing tower light is not a problem, it probably starts flashing just because of you are not doing anything on your computer, so it turns to sleep mode.

Hope this helps,

Jul 08, 2011 | eMachines EL1210-09 PC Desktop

1 Answer

Worked fine last night, discovered it this morning still turned on but no signal to monitor. Rebooted and it began a consistent beeping with no signal to monitor. Unplugged several times to no avail....

the beeping is coming from the cpu.

1 unplug pc
2 pull out ram chips
3 use an eraser to clean the gold, yes thats gold

what happens is the gold on the ram oxidizes and does not connect properly and can go bad but cleaning it with an eraser sometimes works. take a cpu that is working unplu it pull the ram and you will see the same thing your other pc is doing.

4 reinstall ram (correctly)
5 boot up cpu
6 please vote.

Dec 13, 2010 | eMachines T3656 Celeron 440 1GB DDR2 160GB...

1 Answer

When you turn the tower on only yellow light comes on no green, monitor yellow light when you hold in blue light then says no signal goes back in sleep mode

try seeing if one of the ram Modules is loose. If they're tight, try taking them out one at a time and booting each time until all out (unless it starts with one out). If you take one out and it boots then that RAM mod is bad. If you remove them all start putting them back in ,in the same order you took them out in (if you took them out left to right put them back in left to right one at a time booting each time.
Good luck

Oct 14, 2010 | E-Machines eMachines Desktop PC

1 Answer

Tower won't turn on

hi try to put the monitor lead in the tower, the leads are both the same, the fuse might be out in the tower lead.

Mar 28, 2009 | E-Machines eMachines Desktop PC

1 Answer

No signal display on monitor.

1. Check all the connections to make sure they are connected securely and properly. 2. Open your tower case and make sure you video card is seated properly by removing it and then placing it back in the slot. While you have the case open it would be a good idea to clean the inside of it out with some compressed air (remember to always unplug your system from the power source when working inside it unless you are a qualified technician). 3. If problem continues, try using another monitor to check if your monitor has gone bad. If it displays ok on a different monitor then your monitor is bad, if it still does not display you may need to replace your video card.

Jul 04, 2008 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400) Logo

318 people viewed this question

Ask a Question

Usually answered in minutes!

Top AMD PC Desktops Experts


Level 3 Expert

5660 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

Rudra Aradhya

Level 2 Expert

99 Answers

Are you an AMD PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides