Question about Microsoft ChiMei CMV938D 19" Widescreen LCD Monitor

1 Answer


How many volts is the cmv938v lcd? is it 110v 0r 220v?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I have the exact same monitor and it is 220v. But seeing as i bought it in Australia that makes sense. If yours was purchased in North America then it is almost definitively 110v. It is likely that it is written on the actual monitor. If in doubt you could always try it with 110v. If that works then theres your answer. If it doesn't then its probably 220v.

Posted on Jan 19, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hello what kind of voltage use the power adapater?

The power adaptor has normally two voltages.
One is primary (Input) which is 110V AC in USA. 220V in UK and others.There are now a days Adaptors which accept both 220V and 110V. However the Adaptor pin will differ. It will be Flat pins for 110V and Round pins for 220V.

The other voltage is the Output which is fed to the Equipment and is Equipment specific. It can be 18V to 5.2 Volt DC. It varies equipment to equipment.. If a wrong Adaptor with output Voltage not matching with equipment requirement is selected, it may damage the equipment. Be careful.

May 21, 2015 | Sport & Outdoor - Others

1 Answer

I have a 110v whirlpool 30gal. Hot water heater burning up element

If it's a 110v and it's getting 220v then you need to just call an electrician to wire it correctly.

Feb 21, 2015 | Whirlpool Water Heaters

1 Answer

How do I use this adapter in the US with 220 voltage

is it an 220volt ac - dc adapter you could buy a 110V AC to DC adapter with the same DC Voltage and current rating
or you could buy a 110V to 220 Volt adapter
be careful with switch settings

please be aware if timing is required or electrical motors this could be a problem as usa is 60Hz and your appliciance may be designed to run at 50 Hz frequency
there are devices that can convert freq from 60hz to 50 hz

Dec 22, 2014 | Photography

1 Answer

Behringer amp 240 to 120 volts

What you may need is a

Voltage converter ' Voltage Transformer ' step up and step down ...

Connect the 220V line output to EP2500

And the 110V input to your 110V convenient outlet

Aug 20, 2012 | Behringer EUROPOWER EP2500 Amplifier

1 Answer

Plugged 110v dishwasher into 220v

When you have a 220v outlet there are two wires that both supply 110volts, thus the 220volt rating. 110volts uses 1 wire that supply's 110 volts and the other wire is a "neutral" what is a non current carrying conductor. In other words there is no 110 volts on the second wire. Most of the time if you supply a 110 volt appliance with 220 volts you most definately fry something if not everything. Probably the main thing that blew was the control panel be it a computer board, dial switch etc. Sorry for the bad news but it might be cheaper to replace the unit than having it looked at and repaired

Feb 05, 2012 | Whirlpool Dishwashers

1 Answer

I want to buy a festoon light (10 lamps) to light my attic. It is advertised as 110V is it safe to pkug it in to my socket (UK)?

In esence the answer to the question is yes, but you need to take a few things into account.

Obviously, you are going to have to put a UK socket and 220v bulbs into the unit, but the main issue you need to be aware of is the capacity of the wiring in the unit to take the load in the UK. What you want to know is how many amps it used to draw when it was 110v and how many amps it will draw now. Clearly, a UK 13 amp plug will be man enough for almost any light unit (with the correct fuse fitted) but you would do well to ensure that you don't exceed the original planned load for the current, because the WIRING in the unit is the weakest link.

Working it out is fairly easy: Watts/Volts = Amps

So: When it was 110 volts, it maybe had 10x25 watt bulbs in it.
10 25 watt bulbs is 250 watts
250 watts divided by 110 volts means it was drawing about 2.3 amps, so set your limit as 2.3 amps load on the UK curcuit to ensure that the unti wiring can handle the load.

The easy way to fugure this when swapping lights from 110v to 220v is that if it was 110v, then you can use up to double the wattage on a 220v curcuit (and consequently, if you're going from 220 volt to 110 volt, then half the wattage.

Ensure that you use the Watts/Volts=Amps to calculate the correct fuse rating for the item

Sep 09, 2011 | Kitchen Ranges

2 Answers

A friend from US gave me hp netbook-1103135- is it 110 or 220v please advise thanks

It most likely has a 110V plug on the power supply; however, all you have to do is buy the appropriate 220v cable for the power supply for your country, and it should work fine on 220V.
External power supplies are designed to use either 110v or 220v -- all you have to do is change the cable or use an adapter and you're good to go.

Dec 20, 2010 | HP Computers & Internet

1 Answer

Is kenmore 98702 220?? or 110???

if it has a small 3 prong plug then it's 110v for the washer but the dryer should be factory 220 volt however many were sold wired too! 110 volt! just look at the plug small plug 110v large 3 prong! 220v

Jan 22, 2010 | Kenmore 98702 Stacked Washer/Dryer

1 Answer

I replaced the transfer belt and the printer prints now. However, the unit that heats has a black ring on it which transfers to the paper that prints. What part needs to be replaced now?

If you are Talking about the Fuser ***'y

MEA ROLLER (RED IN COLOR) IT'S LIKE A THICK RUBBER - which you can clean it with the Spirit need to clean this part
RCT-ROLLER HEAT (it seems fine)
ELA HOU-FUSER 220V 0r 110V (it seems fine)
LAMP HALOGEN 220V/110V (it seems fine)


Jan 21, 2010 | Samsung CLP-510 Laser Printer

1 Answer

Power conversion


Good day mate, no problem you can plug your dvd direct to your outlet since it indicates 100 - 240V it only means your player is capable of having either 110V 0r 220V.

note: also try to check 1st if you will see a voltage selector at the back of your dvd player. it's either a slide switch indicating 110 or 220V. if no sign of this selector no problem you can plug your player straight to your socket.


Jan 29, 2009 | Durabrand DVD-1002 DVD Player

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2966 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18417 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides