Question about Compaq Presario 700 470024-192 Notebook

2 Answers

\system32\ntoskrnl.exe. Windows could not start because the following file is missing or corrupt:\system32\ntoskrnl.exe. Please re-install a copy of the above file.

Posted by on

  • Lakshman P May 11, 2010

    May i know what Operating System your using. Is windows vista or windows xp ?

  • Anonymous Mar 25, 2014

    how to reboot with this problem stopping it

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Wont let me go to repair just tries to load windows in set up , and then gives me an error 0x0000007b etc and then freezes until i turn off and on again any tips !!!!

Posted on Jan 05, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 27 Answers

Do you have a Windows CD that came with your computer? If so do you know how to boot from it by inserting it into the drive and then pressing F12 just after you switch on your PC? If you can do this then you could try the "repair" option from Windows Setup, this might fix your missing PC problem.

Posted on May 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i reinstall the ntoskrnl.exe when it is corrupt


Assuming a couple of things:
1. Your OS is Windows XP
2. This is the error message you are getting -
"Windows NT could not start because the following file is missing or corrupt:
Winnt_root\System32\Ntoskrnl.exe
Please re-install a copy of the above file."

To reinstall notskrnl.exe, do this:
  • Start the computer by using your Windows XP CD-ROM. Press any key to boot from the CD.
  • After the setup files are finished loading press R to repair using Recovery Console.
  • When you are in the recovery console, select the installation to log on to (usually number 1), and then press ENTER.
  • Login to the Administrator account by typing the password for this account, and then press ENTER.
  • At the recovery console command prompt, type the following command, and then press ENTER:

    For Uni-Processor systems: expand <cd-drive>:\i386\ntoskrnl.ex_ <hd-drive>:\Windows\system32\ntoskrnl.exe
    For Multi-Processor systems:expand <cd-drive>:\i386\ntkrnlmp.ex_ <hd-drive>:\Windows\system32\ntoskrnl.exe
    Note In these two commands, the <cd-drive> placeholder represents the drive letter of your CD drive, and the <hd-drive> placeholder represents the drive letter of the hard disk on which windows is installed.
  • If you receive a prompt to overwrite the file, press Y.
  • Type exit, and press ENTER at the command prompt.
  • You should now be able to boot up properly.
  • Oct 14, 2013 | Dell LATITUDE Computers & Internet

    1 Answer

    When i switch on my Lenovo s10-2 notebook windows does not boot i get an error


    You'll need a repair disc or operating system disc to repair it. If you had a operating system disc you could get the file from it.

    Using a regular Windows Operating System disc, you boot to the disc, then press the R for repair to enter the repair or recovery console.
    Select the operating system, then enter your admin password which is blank in most cases so just hit enter.
    Type: Expand d:\i386\ntoskrnl.ex_ C:\Windows\System32.
    You should get a prompt asking you if you want to Overwrite the File.
    You should enter Y for yes, the press <ENTER> to Overwrite.
    Type exit, remove the disc from the DvD/CD drive.
    Reboot

    Apr 02, 2012 | Lenovo IdeaPad S10-2 Netbook

    1 Answer

    My dell is saying windows could not start because the following file is missing or corrupt: &lt;windows root&gt;\system32\ntoskrnl.exe please re-install a copy of the above file


    helo you will need your windows xp disk to fix this okay you put your xp or which os you use xp you would hit enter i think to install windows then you would click f8 and when you get to the part to where it asks what partition would you want to install windows on remain on c and if it givees you the option R to repair the installation click on r if it is vista or windows 7 there are those images to burn to a cd to fix this issue

    Dec 11, 2010 | Computers & Internet

    1 Answer

    While launching, the following message appears to me Windows could not start because the following file is missing or corrupt: <Windows root>\system32\ntoskrnl.exe Please re-install a copy of...


    You will require a copy of that file so :
    Load your windows install disk and follow the prompts until a menu offers you a choice to repair your disc. Go for that and it should fix your problem by replacing all of the files that the system requires to run again.
    Just placing a copy of the lost file will not allways work, but that file name doesn't ring a bell. Are you sure you haven't got a virus in there somewhere? Running a good antivirus programme would be a good idea if you haven't allready used an up to date one.
    Hope this helps.

    Oct 22, 2010 | Acer Aspire One PC Notebook

    2 Answers

    When i turn on my laptop a memo pops up saying " windows could not start because the following file is missing or corrupt: <windows root>\system32\ntoskrnl.exe. please re-install a copy of the...


    Your computer has been corrupted by a virus or failing hard drive.
    Search for the name of your operating system and repair in Google. (E.g. Windows XP repair)
    You will find instructions that will tell you how to boot to your Windows CD/DVD and repair the problem.
    Once you get the operating system running back up all of your important files.
    Get a new hard disk, install the OS, programs, especially antivirus, and restore your data.
    Otherwise, you run the risk of more virus damage or total drive failure.

    Good luck!

    Aug 18, 2010 | Computers & Internet

    1 Answer

    Windows root system32 ntoskrnl.exe missing or corrupt can you reinstall it without cd?


    you can install id using a USB drive.

    make your USB drive bootable and then copy the files from any other computer .

    Google out on how to make the USB bootbale.

    May 19, 2010 | Microsoft Windows XP Professional

    1 Answer

    Corrupt or missing file but have no disc drive as it is a note book please install a copy of above program windows root system32 ntoskrnl.exe


    IF YOU ARE USING A NOTEBOOK, IN MOST CASES YOU SHOULD HAVE A RESTORATION PARTATION ON YOUR HARD DISK.
    If this file on your CD/DVD is corrupt, the chances are good it will find many more needed to complete the installation.
    Find your restoration partation or get a good working copy or XP to install from.

    Oct 20, 2009 | Microsoft Windows XP Home Edition

    1 Answer

    I have a IBM thinkpad that say at start up the following message. windows could not start because the following file is missing or corrupt. <windows root>\system32\ntoskrnl.exe. please reinstall a...


    Assuming that you are using Windows XP, the easiest solution would be to boot from your XP cd and do a system repair. Please let me know if you need more info on how to do this.

    Nov 30, 2008 | Computers & Internet

    2 Answers

    How do I...


    NTOSKRNL.EXE is missing or corrupt.

    Related errors:

    Below is a listing of the full error message that may be related to this error.

    Windows NT could not start because the below file is missing or corrupt:
    C:\Winnt\System32\Ntoskrnl.exe

    Cause:
    Keyboard issue
    Miscellaneous corruption
    Corrupt boot.ini file.
    Missing boot.ini file.
    Missing or corrupt ntoskrnl.exe file.
    Windows NT installed on a partition bigger then 7.8GB
    Corrupted hard disk drive or severely corrupted Windows.
    Solution:
    Keyboard issue
    This issue has also been known to be caused by a short in the ground wire in the keyboard cable. Make sure this is not the cause of your error by replacing the keyboard with a different keyboard or simply just disconnecting the keyboard from the computer.

    Miscellaneous corruption
    Before trying any of the below recommendations it's recommend that you attempt to load the last known good configuration. Additional information about doing this can be found on document CH000626.

    Corrupt boot.ini file
    This issue is often caused when the boot.ini is missing or improperly configured. This issue often arises after a user has recently added or removed an operating system on the computer or added or removed hard disk drives in the computer.
    Make sure the line pointing to the operating system and it's drive and partition is properly configured in the [boot loader] and [operating systems] section. Additional information about boot.ini can be found on document CH000492.

    Missing boot.ini file
    Microsoft Windows XP users:
    If the boot.ini is severely corrupted or missing a user running Microsoft Windows XP can rebuild the boot.ini to resolve this issue. Additional information about rebuilding the boot.ini can be found on document CH000648.

    Microsoft Windows NT and Windows 2000 users:

    To restore the original boot.ini file in Microsoft Windows NT or Windows 2000 you will need an ERD and follow the below steps. If you do not have an ERD you will be unable to follow these steps.
    Boot the computer with your Windows NT three setup diskettes or the Windows 2000 setup disc.
    In the setup menu, type R to start the repair.
    When prompted for the ERD diskette insert the diskette and inspect the startup environment.
    Missing or corrupt ntoskrnl.exe file
    If the ntoskrnl.exe file is corrupt or missing this can also generate the error. To restore this file follow the below steps.
    Insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD it is likely the below steps will not resolve your issue.
    Reboot the computer, as the computer is starting you should see a message to press any key to boot from the CD. When you see this message press any key.
    In the Microsoft Windows XP setup menu press the R key to enter the recovery console.
    Select the operating system you wish to fix, and then enter the administrator password.
    Type expand d:\i386\ntoskrnl.ex_ c:\windows\system32
    You will then be prompted if you wish to overwrite the file type Y and press enter to overwrite the file.
    Type exit to reboot the computer.
    Windows NT installed on a partition bigger then 7.8GB
    If you are running Microsoft windows NT 4.0 on a partition larger than 7.8GB this issue can occur if the boot files are located outside this limitation. When this error occurs your computer will have the

    error message as shown below.

    OS Loader v4.01
    Disk I/O error status=00000001
    Windows NT could not start because the below file is missing or corrupt: winnt\system32\Ntoskrnl.exe
    Please reinstall a copy of the above file.

    If your system partition is larger than 7.8GB you will need to delete the partition and recreate the partition to 7.8GB or less. Additional information about this issue can be found on Microsoft KB Q224526.

    Corrupted hard disk drive or severely corrupted Windows
    Attempt to check the hard disk drive for any errors by running the chkdsk error. To do this follow the below steps.

    Insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD it is likely the below steps will not resolve your issue.
    Reboot the computer, as the computer is starting you should see a message to press any key to boot from the CD. When you see this message press any key.
    In the Microsoft Windows XP setup menu press the R key to enter the recovery console.
    Select the operating system you wish to fix, and then enter the administrator password.
    Once at the recovery console type chkdsk /r
    Once completed type exit and see if issue is resolved.
    If after trying all of the above steps you are still encountering the same issue it's likely that Windows is severely corrupted and it is recommended you attempt to reinstall Windows. Additional information about erasing the computer and starting over can be found on document CH000186.
    Finally, if during the Windows installation you encounter errors it's likely that your hard disk drive is bad.

    Oct 09, 2008 | Dell OptiPlex GX110 PC Desktop

    2 Answers

    Startup problem


    From: http://www.computerhope.com/issues/ch000646.htm If the ntoskrnl.exe file is corrupt or missing this can also generate the error. To restore this file follow the below steps. 1. Insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD it is likely the below steps will not resolve your issue. 2. Reboot the computer, as the computer is starting you should see a message to press any key to boot from the CD. When you see this message press any key. 3. In the Microsoft Windows XP setup menu press the R key to enter the recovery console. 4. Select the operating system you wish to fix, and then enter the administrator password. 5. Type expand d:\i386\ntoskrnl.ex_ c:\windows\system32 6. You will then be prompted if you wish to overwrite the file type Y and press enter to overwrite the file. 7. Type exit to reboot the computer. If you only have a restore CD, this probably won't work. You should just start the restore all over again, if this is the case.

    Jun 05, 2007 | Acer Aspire 5003WLMi Notebook

    Not finding what you are looking for?
    Compaq Presario 700 470024-192 Notebook Logo

    310 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Compaq Computers & Internet Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18402 Answers

    Abhinandan  Patil
    Abhinandan Patil

    Level 3 Expert

    568 Answers

    mukhtar21 shaikh
    mukhtar21 shaikh

    Level 3 Expert

    2017 Answers

    Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...