Question about Polaroid FLM-3225 32 in. LCD Television

2 Answers

No power i unplugged it to switch out cable boxes. when i plugged it back in no power

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Polaroid Master
  • 1,779 Answers

You most likely have a capacitor or 2 that are bad and as long as it stayed plugged in they stayed charged, then when you unplugged it, they discharged and cannot charge back up. My recommendation is to take it in to a service center to have it repaired it should not cost much to repair. This is a common problem with this design of power supply. I see it every day.

Posted on May 17, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I got power to the tv i had to soider a wire to the back came on foe a monmentthen went out a gain what next do i check.

Posted on Feb 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my e-motion tv when I switch it on and go onto did it says no signal....help please


Why does my TV say no signal? If your HDTV or Standard TV displays a "No Signal" error message, it may be due to one of the following issues:
  1. Determine how many TV's are affected.
    • If it is one TV, continue to step two.
    • If multiple or all TV's are affected, continue to step five.
  2. Ensure that your HDTV is on the same source/input as your MTS Ultimate TV service.
    1. Press the TV button on your MTS Ultimate TV remote control.
    2. Press the TV/Video button.
    3. Wait 10 seconds.
    4. Repeat steps b and c continually to cycle through all the available source/inputs on your TV until the correct source/input is selected. (ie. HDMI 1, HDMI 2, Component 1, Component 2, etc.) On standard TV's (non HDTV), you may have only 2 choices, TV or Video.
  3. If the source is correct from step two:
    1. Unplug the HDMI cable from your MTS Ultimate TV Set-top Box.
    2. Wait 30 seconds.
    3. Plug the HDMI cable back in.
    4. Wait for the signal to initialize.
    5. Make sure all cables connected on the set-top box and your TV are secure.
  4. If the problem persists:
    1. Unplug the power cable from the back of the MTS set-top box.
    2. Wait 60 seconds.
    3. Plug the MTS set-top box back in.
    4. Wait for the signal to initialize.
  5. If you are still experiencing a problem:
    1. Make sure ALL Ethernet and/or Coax cables are securely in place.
    2. Unplug the power from the MTS box labeled 2Wire or Pace as well as the affected set-top boxes.
    3. Wait 60 seconds.
    4. Plug the power back into the MTS box labeled 2Wire or Pace.
    5. Wait for the broadband light to turn a solid green colour.
    6. Plug the power back into the affected set-top boxes.
    7. Wait for the signal to initialize.
Good Luck

Feb 24, 2015 | Televison & Video

1 Answer

Techwood twp 4210 media box


DEAD AV BOX NO POWER LIGHT

UNPLUG FROM THE MAINS
UNSCREW THE TOP CASE
UNPLUG THE 2 SOCKETS REF PICTURE ( TECHWOOD AV BOX RESET AND UNPLUG )

LEAVE THEM UNPLUGED AND “PLEASE BE CAREFUL AT THIS POINT” SWITCH THE MAINS BACK ON AND SWITCH THE POWER ON THE AV BOX, IF YOU GET A RED LIGHT SWITCH THE SET OFF.(PLEASE NOTE THE RED LIGHT MAY NO ALWAYS COME ON, SO DONT BE ALARMED).

PLUG BOTH THE LEADS BACK IN AND SCREW TOP CASE BACK.

CONNECT ALL BACK UP AND YOU SHOULD BE WORKING NOW
JOB DONE HARD RESET.

Let me know if you need any further help

thank you for using fixya and good luck

Apr 15, 2008 | Televison & Video

1 Answer

Mitsubishi wd-60737 HDMI port 1 connected to cablebox. Screen is black and no sound. Cablebox is on, all cables connnected correctly and was previously working. Nothing new was done.


have you tried resetting your cable box? you can do this usually by either holding its power button in until all 3 lights light up, or by unplugging it from power , wait @ 30 seconds & plug back in .

Feb 07, 2015 | Mitsubishi Televison & Video

1 Answer

RCA F19421 Stuck on video since switched from dishnetwork to cable


Some RCA TV's have a "video" option that requires you to use the original remote control to cycle up or down the channels.
Also, try unplugging the TV's from the power receptacle for 30 minutes....some times, that will cause the TV to reset.
With the power cord unplugged, manually push the power button on the front of the TV to discharge all capacitors.
Ensure the 30 minute is complete before plugging it back in.
Let me know if this works.
Thank you!

Jan 02, 2014 | RCA F19421 19" TV

1 Answer

No volume from cable


Hello!
First step: reset your cable box by unplugging of the power supply or unplug power cord of the box. If that's an old fashion big gray one or black one with additional power outlet for TV set, there is a power cord goes into. Unplug it, then plug it back in within 1 minute. not the TV itself, but the cable box's power cord. This will reset it. If you have more modern one or small one for non HD TVs, they have external power adapter, which plugs into those boxes.
Pull that plug out for a minute, then plug it back into. That should take care of your sound issue. Known problem.
Good luck,
Let me know if that took care of your issue.
thanks,
Alex.

Dec 11, 2011 | Toshiba 19SLV411U 19 in. LCD TV/DVD Combo

1 Answer

My gateway profile 5 won't turn on. Checked plugs


Try to power drain it. Unplug all the power related devices that are connected, like a monitor data cable or external printer, just unplug all the cables in the back after you shut down your computer, press the power switch of your computer and keep it pressed for about 45 secs, release it, plug everything back and check it if its working. As well double check if that particular socket is usable, plug something else in to see if its working.

Jun 30, 2011 | Gateway Computers & Internet

2 Answers

I am trying to access the internet wirelessly from a lap top through a D-Link DI-624 I went throught the steps 1. plugged up the router 2. unplugged the DSL box 3. plugged up the ethernet cable to the DSl...


Unplug the power cables from both your DSL modem and D-Link router.
Verify the Ethernet cable is plugged into both your DSL modem and the D-Link router.
Plug the DSL modem power cable back in and wait for the self-test to finish.
Plug the D-Link router power cable back in and wait for the self-test to finish.
Plug your laptop into the D-Link router using an Ethernet cable.
Can you access the D-Link configuration page now?

Check to see if your computer is getting an IP address from the D-Link router.
Here's how to do that, assuming you're using Windows.
Hold down the Windows key on your keyboard then press the letter R.
In the Run dialog box type 'cmd' (without the apostrophes).
Click OK.
In the command prompt window type 'ipconfig /all' (without the apostrophes).
Press Enter.
Look for the line that reads 'Ethernet adapter Local Area Connection'.
Verify that 'Dhcp Enabled' is set to 'Yes".
What is the IP address?thejustin.jpg

Mar 14, 2011 | Computers & Internet

1 Answer

Cable box doesn't work without reciever on.Why?


is the cable box power cord plugged into the back of the receiver?

receivers have "switched" outlets on the back meaning they shut off when the receiver is turned off.

You will need to plug the cable box into a power strip instead.

Dec 31, 2009 | Onkyo Tx-sr507 A/V Receiver

5 Answers

LCD TV picture is green


I just called Vizio and they said to unplug the TV, then physically hold in the power button on the TV for 2 minutes.

Nov 19, 2007 | Vizio L37 Television

Not finding what you are looking for?
Polaroid FLM-3225 32 in. LCD Television Logo

Related Topics:

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...