On my answering machine, it is a VTech Digital Answering System, there is a little square that is flashing back and forth from CL to 0. This is where it tells you how many messages you have. It was working fine and then we had a power outage. I don't know how to change it back to 0.
Please help.
Thanks
According to VTech the "CL" message alerts you to the loss of power and the need to reset the clock. Please refer to the user manual under the "Answering System Operation/Set the Clock" section to reset the clock.
If you don't have the manual, let me know and I will try to locate it.
I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post.
If I have helped you, please help me, and rate this suggestion with the highest FixYa rating. If not then please comment to this post and I will try to help you further.
Thank you
261 views
Usually answered in minutes!
×