Question about MSI K9N SLI Platinum Motherboard

1 Answer

No response after restart

Hi i just get my pc in one piece and i ocured problem when i restart pc during or after instalation or other restart i get no respone system will restart i hear fans going but i had no video signal nothing i thing that everything is pluged propertly i never had the same problem...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 119 Answers
Re: No response after restart

This problem of yours I had with different mothboards..I must say ..there some problems to check.
first..and the most important is the video card ussualy gives theese signs of problem..scond as importance...and the most painful is teh mainboard itself,having a short circuit or some conectionion interupted.,which leads to the video cared..
and after that...the ramm dimms can be damaged and also the hdd sometimes give some kind of problems...
 However,from my experience..I say that..the mainboard is 70% of cases faulty..and 30% the video card...
try to make  a bios update...but I dont think will solve the problem...
I have a similar model...K9A Platinum with ati chipset...had lots of problems too...

Posted on Feb 03, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

3 Answers

I can't fomat my computer as i don't know how to set first boot device as my DVD drive

During the boot process you will see on the screen to press a certain key to enter setup

Press and hold that key during the boot up process to enter BIOS the scroll down to advanced bios features press enter change your first boot device to cd,press escape then press f10 to save to cmos to restart

but if you format your hard drive you will lose the current operating system and you will have to install another operating sytem unless you partition your hard drive and intall another operating system to that partition

hope this helps

Nov 26, 2010 | IBM (25P3294) Motherboard

1 Answer

Hello, I just by a NWZB152, and my XP do not recognize it. I check, and i have XP sp3, and Windows Media Player 11 instaled. In Device Manager, under device status it says "Reinstall the drivers...

go to device manager. You will find MTP with a yellow mark on it. Right click - properties and uninstall. When hardware wiz come up again,cancel the driver install, and should not bug you again. If you really need this device, (don't think you do) look for driver on MB manufactures web site.

Nov 10, 2010 | Motherboards

2 Answers

Pc shuts down during windows xp install


Easy problem to solve my freind:)
Do like this, start the installation as you did before, when your pc restarts, get in to bios again and change the first boot from cd/dvd to the HDD. That will solve your instalation problem:)

Good luck to you
Please take a moment and rate my help for you


Feb 27, 2009 | Jetway Motherboards

1 Answer


There may be automatic restart on in your bios menu. You can access your bios menu by pressing F8 during boot time........... And turn off automatic restart under (hardware) menu...


Jan 17, 2009 | Intel D101GGC Motherboard

2 Answers

Computer turns off and restarts again during the operation repeately.

Hi 2gerr, when you tested the board, was the board outside of the you're case?
Here is one suggestion you can try. Start the PC & press the F5 key every two seconds untill Windows Advanced Options Menu
is displayed on you're screen. You can not use you're mouse here. Use the up & down arrow keys & slide to, Disable automatic restart on system failure. Than press enter. What this should do for you is stop windows from restarting & give you time to catch what is causing windows to restart. If you receive a blue screen with an error message write it down. Press the pause key on the keyboard so you'll have time to write down the error message. It would not hurt to enter you're bios and turn off hault on all errors listed in the main menu of the bios.
Another could be the back side of the board could be touching the case. You can add a piece of a paper bag under the board.
Stopping a possible short. Lastly, enter you're bios & go the hardware monitor. Open hardware monitor & leave it there. Shut off you're monitor & walk away for about 10 minutes or so coming back from time to time & check the temp of you're CPU & mother board temp. Staying in the bios, let me know if the PC restarts.


Apr 25, 2008 | EliteGroup P4M800-M7 Motherboard

1 Answer

Can't install driver

if you have the Driver Disk of the monitor then you have select install manually and then press have disk and give it the path and select the driver for the monitor.

Jan 04, 2008 | Intel SYNTAX S651M SIS651 mATX (SYNTAX...

Not finding what you are looking for?
MSI K9N SLI Platinum Motherboard Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top MSI Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

5660 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you a MSI Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides