Question about Metabo Drills

1 Answer

Metabo model 6030 will not hammer help out - Metabo Drills

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

There are several possibilities. Remove the cover from top of gearbox. The piston / sleeve assembly will be visible. Wiggle the assembly to check for side play. If the assembly is loose side-to-side, loosen one of the support tracks (two allen screws). Wedge a screwdriver between the track and the housing and then re-tighten the screws. Another possibility is that the piston o-ring is worn. stand the tool on its nose, if the piston falls quickly forward, the o-ring is worn out. This part is no longer available. If the piston does not move forward, smack the nose firmly against the work bench. If it still does not move, the piston lube may have dried out. Shoot some WD40 into the sleeve for a quick test. Another possibility is end wear of all hammering parts in the tool. This can be difficult to determine if you dont know what they looked like originally.

Posted on Jun 10, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi I have a metabo hammer drill une 2850 won't start

UHE2850 metabo first look if its the powercable have no phase fracture second is there depending 2 years warranty time on left ?

The switch or only dirt between brush and brushholder inside or an electronic assembly defect or the switch electric field armature . only a slide contact loose sometimes its not hard to find by metabo machines.

Mar 26, 2016 | Metabo Drills

1 Answer

Metabo uhe 28 multi code You have no question but I do see the name metabo so hope this helps. It's the Metabo factory site where you can get parts breakdowns and more.

Jan 04, 2013 | Rotary Hammer Drill Metabo Uhe 28 Multi...

2 Answers

Metabo BHE 22 manual wanted

you can ask to your metabo seller to give one to you
or here:
ask for a free pdf copy

Nov 01, 2012 | Metabo 600242420 BHE22 7/8" SDS-plus...

1 Answer

1/2" metabo hammer drill-

Did you check the carbon brushes?

May 17, 2011 | Metabo Drills

1 Answer

Someone has taken apart my chipping hammer and removed all the wires . im trying to find a wiring diagram or schematic

You can try entering the nameplate data here
to get diagrams

Sep 30, 2010 | Metabo MHE65 Sds Max Chipping Hammer

1 Answer

Metabo SBE750 hammer drill trigger sensitivity

The only possible sollution for this failure in this particular tool is to replace the switch. There are no additional electronics that could cause this.

Jan 14, 2010 | Metabo SBE560 1/2" 0 2,800 Rpm 4.5 Amp...

1 Answer

Hi, i hqave METABO 523 hammer drill that the

You're welcome to ship the unit to me for repair.

Contact me at for more information

Nov 05, 2009 | Metabo Air Tools & Compressors

1 Answer

Manual somone?

Call Metabo (800-638-2264). They will send you one free of charge.

Sep 28, 2008 | Metabo MHE65 Sds Max Chipping Hammer

Not finding what you are looking for?
Drills Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Metabo Drills Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

Are you a Metabo Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides