Question about JVC Audio Players & Recorders

1 Answer

Receiver remote no longer works

Have JVC reciever rx554v hooked to tape, CD and DVD players as well as turntable. After a storm, the romote to the receiver no longer works but everything else still does.
Any suggestions to get remote working again? and yes we did try new batteries. Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

It sounds as though your remote is working fine. Since the storm coincided with your problem I would say that your receiver suffered a power surge that damaged the infrared receiver inside the unit. One other thing to try is to unplug the unit from the wall for about one minute, then plug it back in and try it. If that doesn't do the trick you will have to send it to a repair facility.

Good Luck,
BB

Posted on May 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I expected that the RCA leads from my turntable would just plug into the back of the RCD-W500C, but the manual indicates a somewhat complex cabling arrangement through the amplifier. I have not been able...


Your new cd player/recorder is a "component piece" as is your turntable,cassette player, reel to reel or CD player. Connect it as you would any other component piece of stereo equipment. Set up your recorder to "record" in real time(not high speed or synch record). Your tape recorder records anything that is playing through your reciever to your speakers. So, treat your "CD" recorder as you would a "CASSETTE TAPE" recorder. Play your vinyl record on your turntable and record to CD on your CD recorder ! Pay special attention to the dubbing speed, you will not use "synch or high speed !! Good Luck

Feb 26, 2011 | Audio Players & Recorders

1 Answer

No sound from turntable


1 ensure your reciever is also set to AUX .
2 try another AUX device such as an MP3 player or CD player and check that your Receiver AUX function is working.
2. connect your Turntable to another input such as DVD, CD, or Tape to see if it works at that position.
ensure that the correct button is selected for which ever position you use.

Nov 14, 2009 | Cars & Trucks

1 Answer

Need to record from turntables to cassette deck.


Bypass the reciever. Just mixer to tape deck. You will get a better recording anyways!

Apr 13, 2009 | JVC Audio Players & Recorders

1 Answer

Dvd/cd reciever not working


WELL IF YOU LIVE AROUND HARTFORD, CT THEN CALL ME @ 860-296-0844. AND WE CAN INSTALL IT TOGETHER.... AND IN THE PROSESS I CAN SHOW YOU HOW TO DO IT. mY NAME IS JOHNNY.

Feb 25, 2009 | JVC Car Audio & Video

2 Answers

My turntable works on old reciever and not new one


A traditional turntable only works on Phono (which contains special preamplification and equalization circuitry designed to raise the the level and flatten out the response of a phono cartridge).

After you do that, iIf you're not having hum problems I wouldn't worry about the ground. Or try it again on the FM Ground.

Feb 20, 2009 | Sherwood RX-4105 Receiver

2 Answers

Much loved old J.V.C. unit


Sounds to me like the belt drive is slipping!
Need to open her up and check tightness of belt and probably try to buy another one which will be tighter!

Mar 21, 2008 | Audio Players & Recorders

1 Answer

Sherwood 460 equalizer hook up


Connect the EQ to the Sherwood as if it were a tape deck: EQ's outs connect to receiver's tape ins (play) and EQ's ins connect to receiver's tape outs (record).
Then you hook the tape deck up to the tape ins and outs on the EQ: Tape deck outs connect to EQ's tape ins (play) and tape deck ins connect to EQ's tape outs (record).
This will put the EQ in your receiver's tape loop.
The CD player should be connected to the receiver though the CD in's and out's (or if your Sherwood doesn't have a CD in/out, then use AUX or TAPE2).
To hear the EQed signal with all receiver sources (like the CD player) you'll need to engage the 'Tape Monitor' button or switch which will route the tape loop to the speakers.

Jan 09, 2008 | Audio Players & Recorders

1 Answer

Hooking up dvd, tape, karoke machine to denon reciever


What happens when you select options from the front of the reciever?....accordianman

Sep 07, 2007 | Denon AVR-2106 Receiver

1 Answer

Questions


Swop the CDR into the tape outputs on the amp and use it just like the tape recorder you had hooked up. Also do a direct digital link to a CD player for digital copies.

Aug 18, 2007 | Teac CD-RW880 CD Player / Recorder

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

The Knight
The Knight

Level 3 Expert

73665 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a JVC Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...