Question about Car Audio & Video

1 Answer

Everytime i turn my engine off i have to input the code for my cd player how do you set it

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Did you fit the radio yourself? Or did it come with the car?

Normally each radio has two 12v supplies - one permanent, and one switched with the ignition. The first keeps the 'memory' - radio stations and security codes, the second provides the power to run the unit. It could be that your permanent live is connected to a car live that only comes on with ignition.

Check to make sure that you have a permanent live when the unit is switched off, and your keys are not in your ignition. If you don't then you need to find one.

Posted on May 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to input ford 6000 radio cd code


Ford  Code Entry Instructions

Once the unit has been turned on the display will show ' CODE - - - -'


Press preset [ 1 ] repeatedly for the first digit
Press preset [ 2 ] repeatedly for the second digit
Press preset [ 3 ] repeatedly for the third digit
Press preset [ 4 ] repeatedly for the third digit

 

To save the code press the [ 5 ] key to accept.


The set should now operate.

Mar 05, 2010 | OEM Systems Car Audio & Video

1 Answer

Car stereo JVC KD-PDR40 lost manual can't set clock?


hi my jvc kd-pdr40 cd player keeps resetting the sound to basic with no bass everytime i turn it off

Sep 26, 2009 | JVC KD-PDR30 CD Player

1 Answer

Citroen Saxo CD Player will not play when engine running


The car stereo has 2 +12V inputs: the constant batt input and the key in one.
So actually the stereo is always connected to +12V, even in standby.
When you turn your key, the key in input also starts, thus starting your stereo instantly.
When you turn the ignition on, the key in input is switched off for a couple of seconds, so that all the power goes to starting your engine.
After that key in input should be back on - this is your problem here.

One possible solution would be to cut this wire out, and split the RED battery +12V cable so that it enters in the key in input as well. Check wiring diagrams!.

Test this with cables out (without reinstalling the whole thing back in) and if it works.......leave it and put everything back in.

Only downside is, you have to turn off the radio by hand when you exit your car - or you could lose all battery power !

Jan 16, 2009 | Car Audio & Video

1 Answer

Valor IDA 700w won't play movies


TRY CONECCTING THE BLACK/GREEN CABLE TO GROUND

Nov 21, 2008 | Panasonic DV-169 Valor DVD/VCD/CD/MP3...

1 Answer

I have a sony cd player for my car. everytime i turn the engine off, the pre set radio stations are wiped. what can the problem be?


Its problem of connections. find yellow wire in player's rear connector and hook it always 12 volt as its supply to memory of player.

Sep 11, 2008 | Sony Car Audio & Video

1 Answer

Pre setting the radio station on the keh-p2800 cassette player


HAS TO BE A CONSTANT POWER WIRE THAT CONTROLS CLOCK AND SETTINGS SHOULD BE A 16-14 GUAGE WIRE THE SAY 12+ AND HAS TO BE HOOKED INTO A CURCUIT HAS IS POWERED ALL THE TIME (NOT ONLY WHEN IGNITION IS TURNED ON)

Jul 12, 2008 | Pioneer KEH-P2800 Cassette Player

1 Answer

Turntable connection


you can not connect a turn table in any other input source other than Phono input my friend. turntable has got very weak signal thathas to be pre-amplified before getting a signal just right for a CD/Tape DVD input. you require a phono am to get an audio signal.

Mar 29, 2008 | Audio Players & Recorders

1 Answer

Cd Player Code


I bought a mitsub galant 01 the battery recently changed an teh radio need the code the vin#4A3AA466X1E038768, the serial for the radio#06204159E please I need some help ! e-mail roberto.a.menjivar@hotmail.com

Jan 23, 2008 | Eclipse MOON CD Player CD Player

1 Answer

Store settings


make sure the red and yellow wires are not crossed over like they need to be for a vauxhall

Jun 02, 2007 | Alpine CDA-9853 CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4836 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

The Knight
The Knight

Level 3 Expert

73665 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...