Question about Sanyo CLT2054 20 in. EDTV-Ready LCD Television

1 Answer

Sanyo CLT2054 - power cord has light but when I plug it into the

When i plug the power cord into the tv the light on the cord goes off and the tv will not turn on or do anything

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

OK you need a volt meter to check the voltage output of your power pack as two things cause this now enough power out the pack to run your unit or the unit has a short both problems will unlight the light so you need to know if the power supply is working right first as it should say like 120 volts AC in and 12 volts DC 1000 ma out so you will need to mesure this with a volt meter. this is a common problem loading the load of the curcuit as in your TV is mor the the power pack is giving out thus shorting out the power pack of any voltage present, as the little LED light your seeing only takes 5 volts at very ittle current to light and dose not repersent the total voltage output of the power pack itself

Posted on Jul 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a CLT2054 and lost the power cord. I bought a new power cord but when I plug it in the light on cord goes out and TV wont come on. If I un plug cord light comes back on


You have short circuits inside the TV, the AC goes into shutdown when it senses too much current being draw. Post some pictures inside the TV if you can, wee need to look for short circuits, another thing, you bought new AC adapter with the same voltage and current rating, right?
http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Jun 29, 2010 | Sanyo CLT2054 20 in. EDTV-Ready LCD...

1 Answer

My Sanyo TV just quit working one day after a bad electical storm Its a Model number CLT2054 with an external 12 volt AC to DC converter cord. I thought it may be the converter and replaced it via the...


Did you bought your replacement AC Adapter on Ebay. well I bought mine on Ebay as well but you know what they're not the exact replacement. I encountered a problem with mine, because of the reverse polarity on the output power. you can fix this though, cut the output wire leading to your TV then connect the white wire with the un-shielded one and to the same on the other wire.

Sep 05, 2009 | Sanyo CLT2054 20 in. EDTV-Ready LCD...

1 Answer

Missing power cord 12v


go to radio shack get a 12 volt 1500ma power supply with I belive it is a N% plug end but any how 800 ma to 1500 ma should run this and the plug end is standard plug with plus 12 volts on the inner side and negitive on the outer case side look at the back of the TV or the old power supply it sould have info on voltags and amprage, and the plug as to inner voltage and outer voltage on the plug any old time radio shack or electronics shop should be able to help you bring in the flat screen if need be as if you know its 12 volts then It wont mater weather you use a 1000ma 1500ma 12 volt ubnaversale power pack as the tv will only use the current needed so more MA is good the only concrn you have is the right mini barrle plug and the right side of +/- voltage on that mini plug being most use + voltage in the inner most circle and - 12 volts on thje outer

Apr 05, 2009 | Sanyo CLT2054 20 in. EDTV-Ready LCD...

2 Answers

SANYO CLT2054 WITH FADING SCREEN


We had the same problem and it was the ac adaptor which is next to impossible to find. If you find one let me know where?

Jan 27, 2009 | Sanyo CLT2054 20 in. EDTV-Ready LCD...

2 Answers

Power Cord


Please let me know when I can get the power cord & AC adapter. I moved and lost them and cannot use my television. Thank you R. Werkheiser

Nov 03, 2008 | Sanyo CLT2054 20 in. EDTV-Ready LCD...

2 Answers

I have a CLT2054 but i missed the power cable


I bought one on Ebay and it didn't work because the one they sale on Ebay has a reverse polarity, try fixing this, cut the output wire, the one leading to your TV, then reverse the connection, white to un-shielded wire and do the same on the remaining wire.

Aug 22, 2007 | Sanyo CLT2054 20 in. EDTV-Ready LCD...

3 Answers

Help


power adapter is failing, get a different one and see.

May 06, 2007 | Sanyo CLT2054 20 in. EDTV-Ready LCD...

Not finding what you are looking for?
Sanyo CLT2054 20 in. EDTV-Ready LCD Television Logo

527 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...