Question about Danby Dehumidifiers

1 Answer

What does P1 mean on display? - Danby Dehumidifiers

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 12 Answers

Danby's Consumer Help Line (1-800-263-2629) is always busy. So, I called their General number: 419-425-8627. The receptionist transferred my call to their Service dept. My call was answered in 2 minutes.

The Service Rep. described the following code for my dehumidifier model (DDR657EE):
P1 = Defrosting: the unit will go into Defrost mode periodically to ensure that the parts are working at the right operating temperature. It should be in Defrost (P1) mode for only a brief period of time. If the unit is in Defrost (P1) mode continuously for a couple of hours (or more), then you should call Danby Service for further assistance.

He had no documentation of a P2 code for my model.

He also described other General Codes (applicable to most Dehumidifier/Humidifier models):
E1 = Not enough water
E2 = Not draining
E3 = Water temperature too cool
E4 = Overflow Switch activated
E6 / E7 = Problem with Temperature Sensor

I hope that helps.

Posted on May 19, 2009

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 12 Answers

SOURCE: My model is DDR4009EE, after it run for a while,

My Danby DDR657EE shows P1 periodically also. So, I called Danby.

Danby's Consumer Help Line (1-800-263-2629) is always busy. So, I called their General number: 419-425-8627. The receptionist transferred my call to their Service dept. My call was answered in 2 minutes.

The Service Rep. described the following code for my dehumidifier model (DDR657EE):
P1 = Defrosting: the unit will go into Defrost mode periodically to ensure that the parts are working at the right operating temperature. It should be in Defrost (P1) mode for only a brief period of time. If the unit is in Defrost (P1) mode continuously for a couple of hours (or more), then you should call Danby Service for further assistance.

He had no documentation of a P2 code for my model.

He also described other General Codes (applicable to most Danby Dehumidifier/Humidifier models):
E1 = Not enough water
E2 = Not draining
E3 = Water temperature too cool
E4 = Overflow Switch activated
E6 / E7 = Problem with Temperature Sensor

So, if you see P1 periodically (for brief periods), then it would be normal.

Also, here is a link to Danby's FAQ page for Dehumidifiers (which answers some common questions):
https://www.danby.com/faqs.php?cat=12

I hope that helps.

Posted on May 22, 2009

  • 8 Answers

SOURCE: The display reads "P1" and

just type in the type of air conditioner on line when you log on and ask the computer or view functions for the ac when you doas i stated about enterig it online.

Posted on Oct 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blue star Visi cooler subzero error code p1


Amazon.com: Questions And Answers: WHAT DOES THE P1 error code mean??

www.amazon.com/.../ref=ask_dp_dpmw_al_hza?asin...
Amazon.com, Inc.Oct 19, 2014 - Hi David, According to the manual: "P1- Unit is defrosting-- Allow the unit time to automatically defrost. The error will clear after the unit self ...

Jul 26, 2015 | Dehumidifiers

2 Answers

What does P1 mean


t appears to mean "defrosting." In other words, the condenser coils have gotten too cold and are icing up..


The filter is probably full, or the thermostat is faulty. Open it up and clean the filter first.

Sep 17, 2012 | Midea MDF1-30AEN3-BA4 WP 30PT ES...

1 Answer

Spt 65 pint error code p1


According to the manual, this code, P1, means that it is in a defrost cycle. I now have the problem that my unit is in the P1 mode as often as it is in the dehumidification mode.

May 15, 2012 | Sunpentown 65 Pint Dehumidifier with...

1 Answer

My Whirlpool AD40USL5 Dehumidifier is displaying P1 on the control panel. I am not able to find any information about this in the User Guide that came with my unit. Could you please tell me what this...


Here is a link to the Owners Manual for the model number you listed. However, it does not have a LCD display on the Control Panel, which would show the Error Code P1. This is a Kitchen Aid brand that was manufactured by Whirlpool with the AD40USL5 Model Number. This came directly from Whirlpool's website. Hope it helps you in some way.

http://www.kitchenaid.ca/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%201187730.pdf

Apr 04, 2011 | Whirlpool AD40USL Dehumidifier

1 Answer

Unit displaying p1 in the led window,and will not respond to keypad functions.


P1 indicates that the unit is in defrost mode, ie it's too cold.

Jan 24, 2011 | Danby DDR2509EE Dehumidifier

1 Answer

DDR4010E just bought and set up now a couple hours later the display reads:P1. what does that mean?


P1 is code for defrosting. Once it's done defrosting it should start operating

Oct 29, 2010 | Danby Dehumidifier

1 Answer

The display reads "P1" and I can't change settings. Can't find what "P1" means in manual. Can you help?


just type in the type of air conditioner on line when you log on and ask the computer or view functions for the ac when you doas i stated about enterig it online.

Oct 07, 2010 | Dayton 1DGX6 Dehumidifier

1 Answer

Code on Top


I have another of their dehumidifiers, the MDF1-30AE. The first time the P1 came on, the unit stopped, because the filter needed cleaning. Recently P1 came on but the unit didn't turn off, and I had already cleaned the filter, so I phoned Midea customer service at 1-866-646-4332. The man told me P1 means it's in defrost mode and said to just leave it on and the P1 will eventually go away. It's been a while though....

Dec 01, 2009 | Midea MDC-45AE Dehumidifier

1 Answer

My model is DDR4009EE, after it run for a while, the display changed from RH to "P1",what does "P1" mean?


My Danby DDR657EE shows P1 periodically also. So, I called Danby.

Danby's Consumer Help Line (1-800-263-2629) is always busy. So, I called their General number: 419-425-8627. The receptionist transferred my call to their Service dept. My call was answered in 2 minutes.

The Service Rep. described the following code for my dehumidifier model (DDR657EE):
P1 = Defrosting: the unit will go into Defrost mode periodically to ensure that the parts are working at the right operating temperature. It should be in Defrost (P1) mode for only a brief period of time. If the unit is in Defrost (P1) mode continuously for a couple of hours (or more), then you should call Danby Service for further assistance.

He had no documentation of a P2 code for my model.

He also described other General Codes (applicable to most Danby Dehumidifier/Humidifier models):
E1 = Not enough water
E2 = Not draining
E3 = Water temperature too cool
E4 = Overflow Switch activated
E6 / E7 = Problem with Temperature Sensor

So, if you see P1 periodically (for brief periods), then it would be normal.

Also, here is a link to Danby's FAQ page for Dehumidifiers (which answers some common questions):
https://www.danby.com/faqs.php?cat=12

I hope that helps.

May 11, 2009 | Dehumidifiers

2 Answers

P1 code displayed in LED


Condenser coils do not freeze, it is the evaporator coils that freeze. If it is icing up then the setting is too low for the area it is in, basically the humidistat will never be satisfied so it will run continually and end up freezing the evap coils, the coils could also freeze if the filter is dirty or there is an air flow problem.

Apr 13, 2009 | Dehumidifiers

Not finding what you are looking for?
Dehumidifiers Logo

Related Topics:

2,712 people viewed this question

Ask a Question

Usually answered in minutes!

Top Danby Dehumidifiers Experts

Bill Long

Level 3 Expert

587 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Gil Shultz

Level 3 Expert

3368 Answers

Are you a Danby Dehumidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...