Question about HP OfficeJet 6210 All-In-One InkJet Printer

1 Answer

I have the officejet 6310 but cant use the scan feature, how do I get it to work

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 184 Answers

This is how you use the scanning features of your printer.
To use the scan features, the HP all-in-one and computer must be connected and turned on. The HP all-in-one software must also be installed and running on the computer prior to scanning. To verify that the HP all-in-one software is running, look for the HP all-in-one icon in the system tray at the lower-right side of the screen, near the time.
NOTE: Closing the HP Windows system tray icon can cause the HP all-in-one to lose some of its scan functionality and result in the No Connection error message. If this happens, you can restore full functionality by restarting the computer or by starting the HP Image Zone software.
For information about how to scan from the computer, and how to adjust, resize, rotate, crop, and sharpen scans, see the onscreen HP Image Zone Help that came with the software.
Scan an original
Follow these steps if the HP all-in-one is directly connected to a computer through a USB cable.

1.
Load the original face down on the right front corner of the glass.
2.
In the Scan area, press Scan To . The Scan To menu appears, listing destinations, including applications, for anything that is scanned. The default destination is whichever one was selected the last time this menu was used.
3.
To select an application to receive the scan, use the arrow buttons to highlight it and then press OK or Start Scan . A preview image of the scan appears in the HP Scan window on the computer.
4.
Make any edits to the preview image in the HP Scan window. When finished, click Accept . The HP all-in-one sends the scan to the selected application.

Send a scan to an HP Instant Share destination
Follow these steps if the HP all-in-one is directly connected to a computer through a USB cable.

1.
Load the original face down on the right-front corner of the glass or, if using the document feeder tray, in the document tray.
2.
Press Scan To on the control panel of the HP all-in-one. The Scan To menu displays.
3.
Use the Up Arrow and Down Arrow buttons to highlight HP Instant Share .
4.
Press OK or Start Scan to select the destination and scan the image. The image is scanned and sent to the selected destination.
NOTE: If an original is detected in the automatic document feeder, one or more pages are scanned. If no original is detected in the automatic document feeder, a single page is scanned from the scanner bed.
NOTE: For Windows users, the HP Image Zone software opens on the computer, and the HP Instant Share tab displays. A thumbnail of the scanned image will display in the Selection Tray. For more information on the HP Image Zone, see the onscreen HP Image Zone Help that came with the software.

Stop scanning
To stop scanning, press Cancel on the control panel.

Posted on May 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

HP Officejet 6310 xi all-In-One - What should I do to scan from computer Windows7 Trying to scan from wireless computer, what steps do I need


if you have installed the full feature software of the printer on your computer then you would find HP solution center on the desktop screen. double click on it and then Solution center opens up.. then click on scan document and follow the on screen process it will scan..

Mar 26, 2011 | HP OfficeJet 6310 All-in-One Printer...

1 Answer

How do I get my HP 6310 to scan---free download etc?


To scan using your HP Officejet 6310, you need to install the full feature driver software.

Full feature driver software can be downloaded from the following web link:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1119598&lc=en&cc=uk&dlc=en&lang=en&cc=uk

Also please perform the following steps to scan using your unit:

http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=31271&tmp_task=useCategory&lc=en&dlc=en&cc=uk&lang=en&product=1119598

:) Dr Tony

Apr 17, 2010 | HP OfficeJet 6310 All-in-One Printer...

1 Answer

I have hp officejet 6310 all in one, but the


Please visit- http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&dlc=en&cc=us&product=1119598 and download the full feature drivers and save it on your computer.

2. Uninstall the existing driver from program and features under control panel.

* To search for progam and features, Click on start or the windows vista logo on left bottom, click on control panel, clck on program and features and then unistall the printer driver.

3. Power off the printer and unplug it from computer.

4. Install the printer from the saved drivers and plug it when asked.

Restart computer once the installation is compete and hope the scan would work after this.

Mar 24, 2010 | HP OfficeJet 6310 All-in-One Printer...

2 Answers

Hp officejet 6310 scanner not working needssoftware


You need the full-featured printer software to enable the scanning features on your OfficeJet. You may download the software from HP: (choose your operating system)

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=1119598&

Good luck!

Dec 12, 2009 | HP Officejet 6310 All-In-One InkJet...

1 Answer

I have an HP Officejet 6310 All-in-One printer. I


Open the HP Photosmart Software on a Windows computer
1. Do one of the following:
– On the Windows desktop, double-click the HP Solution Center icon.
– In the system tray at the far right of the Windows taskbar, double-click the
HP Digital Imaging Monitor icon.
– On the taskbar, click Start, point to Programs or All Programs, select HP,
and then click HP Solution Center.
2. If you have more than one HP device installed, select the HP All-in-One tab.
Note On a Windows computer, the features available in the HP Solution
Center vary depending on the devices you have installed. The HP Solution
Center is customized to display icons associated with the selected device. If
the selected device is not equipped with a particular feature, then the icon for
that feature does not display in the HP Solution Center.

From here, you can scan, make copies, and perform maintenance procedures such as checking the ink levels for the print cartridges.

Nov 16, 2009 | HP Officejet 6310 All-In-One InkJet...

1 Answer

My HP Officejet 6310 All-in-One gives me a no destination when I try to use the scan feature. Do I have to have a specific program on my computer?


Yes, go to HP support and place your model in the search box and download the program
HP Director...make sure if you have IE7 and 8 there is a special driver download for that model that allows HP director to properly work with Internet Explorer 7 and 8

Aug 26, 2009 | HP Officejet 6310 All-In-One InkJet...

1 Answer

Cant scan using my hp 6310 says I need to install scan feature


To download the drivers click here. Then select your operating system. Once done download whatever drivers you need.

Hope this helps!

Mar 16, 2009 | HP OfficeJet 6210 All-In-One InkJet...

2 Answers

HP Officejet 6310


If you have set up your printer on a wireless network, you will need to open up some ports on your router in order to get the scan feature to work. I could only print and not scan. I went to HP's support site and they gave me the list of ports to open -- of course they don't tell you how to do that. Everything works fine now. If that's your problem, post another thread with the router ID and hopefully we can figure it out. Hope this helps.

Apr 10, 2008 | HP OfficeJet 6110 All-In-One InkJet...

Not finding what you are looking for?
HP OfficeJet 6210 All-In-One InkJet Printer Logo

611 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...