Question about RCA F36649 36" TV

1 Answer

Suddenly, can't get all the tv channels!

All of a sudden, during the past few weeks, we can't get channels 2 - 6....the auto tuning function skips over them!  What happened?  It's not the cable...the rest of the channnels work fine, and the other tvs in the house work as well.


Thank you.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • RCA Master
  • 8,617 Answers
Re: Suddenly, can't get all the tv channels!

Try resoldering where the tuner mounts. Rca has had some problems with solder connections

Posted on Jan 21, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to tune channel when channels are locked?

The Sony KV-36HS510 has an Auto Setup function for the channels.

1 Press POWER to turn on the TV.
2 Press TV FUNCTION on the remote control.
3 To continue running Auto Setup, press CH+. To exit Auto Setup,
press CH-.

Auto Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.

To reset the TV to factory settings
1 Press POWER to turn on the TV.
2 Hold down RESET on the remote control.
3 Press TV POWER on the TV. (The TV will turn itself off, then back
4 Release RESET.

Apr 14, 2016 | Sony FD Trinitron WEGA KV-36HS510 36" TV

1 Answer

We have no remote. Is there a way that I can get my tv to stop on channel 3? It just goes from channel 2 to channel 4 and does not allow 3 to come on -- skips right over it . I just need to use it for a...

it simply means that channel3 has been set to skip/go to the tuning menu and select manual channel position3 and cancel channel skip function.

Oct 05, 2013 | JVC AV-32F703 32" TV

1 Answer

How I re-set the skip channels

Just do an auto tune function. Refer its user manual for details.

Sep 18, 2012 | Prima C2012 TV

1 Answer

We can't get any of the channels don't know where to start from menu area


You just do autotune to receive all channels. In this mode TV will tune through the entire channel band automatically, and finally will stop tuneing, and will show the first channel receved. You must be patient for these time. about two or three minutes, without disturbing is process. The tuning process follows.

Auto Tuner Setup

In Auto Tuner Setup, the TV automatically scans

t h rough all available channels, memorizing the active

ones and skipping over blank ones or channels with

weak signals. This means when you scan (using the

CH A N N E L +/- b u t t o n s ) you will receive only clear,
active channels
P ress the ME N U b u t t o n
Press Right or Left button to operate
Press Vol+ or Vol (--) to choose CABLE or AIR
Press UP or DOWN button to move to START
Press Right or Left Button to start Auto Tuner Setup

Tv will show "NOW PROGAMMING" display.
Programming will take approximately 1 to 2 minutes.
After all it will show

Some cable systems experience interference from radio frequencies on cable Channel 95. You may delete this channel from
your scan by removing the "X" next to it on the Channel Summary screen.

Nov 29, 2010 | JVC AV-27120 27" TV

1 Answer

There is no local channel,cable only international..i lost my manual,

Here is the procedure for auto tuning. Pleas go through it. Connect the antenna to the rear antena socket marked as &% ohms antena and continue.

If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please

skip ahead to "Channel Summary" to continue setting up your television. In Auto Tuner Setup,

the TV automatically scans through all available channels, memorizing the active ones and

skipping over blank ones or channels with weak signals. This means you scan using the

CHANNEL +/- buttons), you will receive only clear active channels.

Press the MENU button


?® To operate

?® To choose CABLE or AIR

Press the OK button to start

Initial Setup

Auto Tuner Setup

Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the

message PROGRAMMING OVER! appears onscreen.

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You

can add or delete channels from the line-up or prevent any unauthorized viewers from watching

any or all 181 channels.

Press the MENU button


?® To operate

The Channel summary screen will now be displayed with

the channels set to scan marked with an "?". You can delete

channels from the scan by removing the "?". If any channels

were missed during auto tuner setup and you wish to add

them, you may by placing an "?" next to the channel number.

?† ?® To the SCAN column

Press the OK button to include or delete from scan

Press the MENU button when finished

You can block access to a channel by activating the channel lock.

Press the MENU button


?® To operate

?† ?® To the Lock Column ( )

Press the ZERO button to lock or unlock that channel

Press the MENU button when finished

Press the MENU button when finished

If you wants any codes, contact me through Fixya. Ok
I'm quating these procedure from the manual I've with me, and it is for JVC AV32S565.

Nov 08, 2010 | JVC AV-32S575 32" TV

1 Answer

TV channel sound from a different channel

I just unplugged the tv from the power source and disconnected the cable connection and then reconnected them back after sometime. The TV started auto programming after turning on and that resolved the problem.

Oct 18, 2009 | RCA Standard (CRT) Televisions

1 Answer

Hotel TV

check in preset under menu the channels 30 above maybe skip, set this channels to skip off. or just do the auto tuning.

Jun 11, 2009 | Zenith C27A24T 27" TV

1 Answer

Tv tuning instructions how to?

The quick user guide is available here: F32648 F36648

Tuning is automatic on this TV, ensure that auto channel search is on from menu.

Advanced Auto
Channel Search
Auto Cable/Air Switch sets tuner
to cable or “off-air” frequencies
during initial setup. Then system
automatically scans for and locks
active channels into channel

May 06, 2009 | RCA F32648 32" TV

1 Answer

#4 & #5 buttons do not work on my remote. Channel 55 wont come in either on my tv

I had that problem 2 my channels disapeared one by one and some will skip yes...

I always use on my remote controll :

1 menu
2 Ch tuning
3 auto

and then wait untill it has found all the channels

Oct 02, 2008 | Orion1934 19" TV

Not finding what you are looking for?
RCA F36649 36" TV Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66685 Answers

John mullen

Level 2 Expert

229 Answers


Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides