Question about Frigidaire FEF336BC Electric Kitchen Range

2 Answers

I got the Oven door unlocked but...

The oven won't work as the it still thinks the door is locked.

 

I get a code F-15 - which I can not find anywhere.

 

Any ideas??

 

Isn't it amazing that a 30 weed-eater has a warrenty of 2 years and a $600 range has only one year.!!!!

Posted by on

  • pickhardt Oct 16, 2007

    F-15 wasn't on the list either.



    I don't know how it happened.  I had a guest who said he pushed a bunch of buttons - I don't know WHY.  I hadn't used self-cleaning in about two months.  He took the back off last night and did the electric jump to unlock the door, the door now opens but the oven thinks it is still locked. 



    He did check the motor and it is good.  He thinks it may be the circuit board - I hope not.  



     



    I will left you know when I eventually find something out.



     



    Thanks for your time



     



    Kat

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

F15 code is the main circuit top panel on the back its in the center when you remove the back look for burnt wires the part is about $225

Posted on Oct 14, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 473 Answers

Not sure what f-15 is either?  Look on the back of the stove and see if there is a tech sheet.  This will tell you the codes.  My guess would be the lock motor has gone bad.  You can check the motor by removing the wires from its terminals and check for resistance with an ohm meter.  Make sure to unplug stove first!  Was this after running a clean cycle?  Let me know what you find.

Posted on Oct 16, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My frigidaire oven wont stop beeping and it has a f9 code


Hi

F9 is a door lock error and to solve this issue you can hold the light switch for 15 seconds, this will reset the control. If it won't work then hold the light switch in and set the unit to clean and after a minute press cancel to cancel the clean cycle. If still it won't work then the door lock assembly should be replaced. Hope this helps...please post back for further assistance.

Daniel

Aug 24, 2011 | Frigidaire FEB27S5A Electric Single Oven

1 Answer

I am receiving the F9 code. The oven will not turn on. I have reset the oven but it still does not work


Hi

F9 is a door lock error and to solve this issue you can hold the light switch for 15 seconds, this will reset the control. If it won't work then hold the light switch in and set the unit to clean and after a minute press cancel to cancel the clean cycle. If still it won't work then the door lock assembly should be replaced. Hope this helps...please post back for further assistance.

Daniel

Aug 08, 2011 | Amana ACF4215 Electric Kitchen Range

1 Answer

Oven door will not unlock


Hello,, Some times this will happen after a self clean cycle if the timer did not finish the entire clean. Try to set the clock to start the self clean again then simply end the self clean. This should unlock the door. If the door remains locked. You may check the oven for an error code, or the door latch itself may need to be replaced. One other possible would be to turn off the power to the oven and try to let the oven control reset. leave the power off for about 15 minutes then turn the power back on. That will sometime work aswell. Good luck and feel free to call me if you need more help.
MIchael Anderson
Anderson Appliance
(865)945-3808

Feb 10, 2010 | Kenmore 30172 / 30174 / 30179 Gas Single...

4 Answers

The lock on self cleaning oven door will not release


Once the cleaning button on the oven is pressed it take 15 minutes for the uven door to unlock.

Jul 30, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Beeps - won't stop - f90 code - thinks door is locked.


F90 Maximum oven door unlock time exceeded.
F91 Maximum oven door unlock attempts exceeded.
F92 Maximum oven door open time exceeded.
F93 Maximum oven door lock time exceeded.
F94 Maximum oven door lock attempts exceeded.


1. (F90, 91, 92, 93 & 94) Check the wiring between EOC & Lock Motor Micro Switch.

2. (F90, 91, 92, 93 & 94) Replace the Motor Door Latch assembly if necessary.

3. (F90, 91, 92, 93 & 94) Check for binding of the Latch Cam, Lock Motor Rod & Lock Motor Cam.

4. (F90, 91, 92, 93 & 94) Check to see if Lock Motor Coil is open. If open, replace Lock Motor Assembly.

5. (F90, 91, 92, 93 & 94) Lock Motor continuously runs - if Micro Switch is open, replace Lock Motor Assembly.

6. (F92, 93 & 94) Check oven door Light Switch - if open, replace Switch.

7. If all situations above do not solve problem, replace EOC.


F90 is a door lock code, Try this...
unplug the range.
wait 1 minute.
turn the range back on,
then while holding in on the oven door.
start another self clean.
wait 2 minutes.
then cancel the self clean.

do not release the door until the door lock light goes out.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 23, 2009 | Frigidaire FGS365EC Stainless Steel Gas...

3 Answers

Oven door locks and un locks code F90


The F90 fault indicates that the maximum time allowed for oven door unlock was exceeded. The control attempted to unlock the door. The door lock motor or mechanism failed to unlock the door within the maximum amount of time it is allowed to be energized by the control board.

It is unlikely that you will be able to reset this fault code. You can try to completely disconnect electrical power and leave it off for 5 minutes. After reconnecting power, the fault code will probably reappear since the control will still detect that the oven door is locked. The only way to clear the fault code is to disassemble the range and repair or reset the oven door lock assembly. You will need a service technician to complete this repair.

Dec 16, 2008 | Kenmore 79013 Stainless Steel Gas Kitchen...

2 Answers

Frigidaire Range FEF357BBD error code F9


I had the situation where the oven thinks the door is locked but it was not locked. Setting and holding clear eventually gave a f9 error.
I solved this by turning the circuit breaker off and taping over the oven light switch ( so it thinks it really is locked ) and turning on the breaker. The oven unlocked and appears fine now.

Nov 09, 2008 | Frigidaire PLEF398AC Electric Kitchen...

6 Answers

Oven locked so I can't shut door/operate oven


Thanks a million, solved the problem like a charm. For those that can't find it, it is on the left side orf the OVEN, not the stove. Once you open the door, you'll find it on the frame's upper left side corner, can't miss it. Good luck

Oct 27, 2008 | Frigidaire 30" Self-Cleaning Freestanding...

Not finding what you are looking for?
Frigidaire FEF336BC Electric Kitchen Range Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

171 Answers

Paul Carew

Level 3 Expert

3239 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...