Question about Microscan FIS-0820-0003 Fixed Mount

1 Answer

The scanner will not recognize a bad barcode. the scanner appears to learn the barcode, but will not recognize a barcode that has been removed from the label or completely obliterated with a laundry marker. If we move the label slightly closer to the scanner it will occasionally detect the bad label.However;all attempts to reposition the scanner did not solve the problems. the scanner is between 3 and 4 inches from the labl

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There are many factors that can make a barcode a "bad" barcode. Moving the barcode closer or farther from the scanner won't solve many of the attributes that make a barcode "bad". It may have a wrong check digit. It may be the wrong type of symbol, or the scanner may not be programmed to see this type of symbol. It may be printed in a color the scanner has difficulty seeing. The substrate or the bars may be too reflective. The scanner may be at the wrong angle (not just distance) from the barcode. Most scanners need to see the barcoce at about 60 degrees--90 degrees is always a problem.

Can you email me a pdf of the barcode? I may be able to identify the problem from that.

Posted on Jun 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Config


Hi,
Quick reference is just for simplified configuration. For detailed configuration go to the reference manual.
Download:
Hopefully you know about Code families and specifications? If not - you can learn it here.

Apr 25, 2013 | Datalogic Heron D130 Handheld Barcode...

1 Answer

I dint get connection with my pc. to my USB.. it is not recognizing


Does some other USB device work properly when connected to the USB port that you are trying to use with your Transcend Barcode Scanner?

Did you try to connect the Transcend Barcode Scanner to some other computer? If so, did the other computer recognize it?

If the Transcend Barcode Scanner is "brand-new", did the packaging for it come with a CD-ROM that you need to use -before- trying to connect the Transcend Barcode Scanner to your computer?

Aug 19, 2010 | Computers & Internet

1 Answer

How to use an RF scanner? I have never used one of these devices and I need to learn how to use one for my job assisgment.


you are on the wrong site. you need to find out what kind of RF scanner you will be working with and find the tutorial for that device on the mannufacruer's website. If you for some reason can't find out what kind it is you may recognize it hear: http://www.barcodesinc.com/cats/barcode-scanners/cordless.htm good luck.

Oct 01, 2009 | Office Equipment & Supplies

1 Answer

I just recieved the Unitech MS 183 barcode scanner. The unit when pluged into the computer, will scan one barcode then shut off (The red receptive light no longer appears) and the one barcode scanned will...


The scanner has several modes of operation after reading a barcode. But I comment it may be bad configuration. Check that the mode of connection is correct (usb, keyboard wedge, RS232, etc.). All this programming is done with the user manual, through configuration barcodes. If you do not, then you can download from www.ute.com.
Regards.
Roberto Martinez

Aug 13, 2009 | Unitech MS 183 (MS183)

2 Answers

The scanner is scanning but no data is transmitted to the PC


I also purchased a Symbol LS4071 and when I connected this scanner (purchased at a great discount through eBay) to my computer using the keyboard wedge (with a ps2 connection - the round connector - the connector is split like a "Y") I received the error message that my computer could not recognize this external hardware. I went to barcodediscount.com and ordered the usb connector for this scanner as usb connections are usually recognized. The part # for this connector is STI85-0200R. It cost 72.55 with shipping, but I received the scanner at such a wonderful price that I thought I'd chance it and try it with a usb rather than a keyboard wedge connector.
The computer immediately recognized the usb connection, and the usb connector comes with a manual with codes to enable proper scanning, but still no luck getting the data into the computer. So I called Symbol's technical support department. The technician told me to remove the rubber "boot" at the bottom of the hand held scanner (not the scanner base) by pulling on the front of it (where the 2 little round circles are). It's tough to remove, but keep at it. Then gently remove the battery and unplug it, then plug it back in and reattach the base. He said this would reset the battery. Voila!!!! Sucess!!!!

If your scanner's keyboard wedge connection is recognized (a little popup window will say that it is a Symbol barcode scanner and that it is installed and ready to use), try taking the battery out and putting it back in to reset it. Hopefully this will also work for you. Symbol's technical support # is (800) 722-6234.

Mar 17, 2009 | Datalogic Heron D130 Handheld Barcode...

2 Answers

I have an LS4071 with an RL474 base. The cable has the PS2 Keyboard end. Scanner gets a good scan but no data goes into the computer. Testing with notepad open to receive the scan.


When I connected this scanner (purchased at a great discount through eBay) to my computer using the keyboard wedge (with a ps2 connection - the round connector) I received the error message that my computer could not recognize this external hardware. I went to barcodediscount.com and ordered the usb connector for this scanner as usb connections are usually recognized. The part # for this connector is STI85-0200R. It cost 72.55 with shipping, but I received the scanner at such a wonderful price that I thought I'd chance it and try it with a usb rather than a keyboard wedge connector.
The computer immediately recognized the usb connection, and the usb connector comes with a manual with codes to enable proper scanning, but still no luck getting the data into the computer. So I called Symbol's technical support department. The technician told me to remove the rubber "boot" at the bottom of the hand held scanner (not the scanner base) by pulling on the front of it (where the 2 little round circles are). It's tough to remove, but keep at it. Then gently remove the battery and unplug it, then plug it back in and reattach the base. He said this would reset the battery. Voila!!!! Sucess!!!!

If your scanner's keyboard wedge connection is recognized (a little popup window will say that it is a Symbol barcode scanner and that it is installed and ready to use), try taking the battery out and putting it back in to reset it. Hopefully this will also work for you. Symbol's technical support # is (800) 722-6234.

Mar 11, 2009 | Symbol LS 4071 Handheld

1 Answer

Letter G appear at the end of barcode


you have a "suffix" programmed into the barcode scanner. this is a common feature and allows for auditing (like a user signature) these can be removed, The code book should have pages of option programming barcodes, in which you should be able to find a section on programming prefixes and suffixes, there should be a control barcode which clears all suffixes. This should solve your problem

Sep 04, 2007 | Symbol LS2208-1AZU0300S Handheld

Not finding what you are looking for?
Microscan FIS-0820-0003 Fixed Mount Logo

256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microscan Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Microscan Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...