Question about Air Tools & Compressors

1 Answer

Paslode 5350/90S PM Powermaster Bends nails over

I have a Paslode 5350/90S PM Powermaster Pneumatic Framing nailer it bends every nail over any ideas? Thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 226 Answers

USUALY THIS IS CAUSED BY TO LOW OF AIR PRESSURE(NEED AT LEAST90-100PSI)OR NAILING INTO SEASONED HARD WOOD SUCH AS OAK,OR THE WRONG DEGREE PITCH OF THE COLLIATED NAILSHOPE THIS HELP'S.PLEASE RATE THIS .

Posted on May 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is it shooting 2 nails @ a time?


Your driver could be broken or worn down and may need to be replaced.

Mar 15, 2015 | Paslode F350s "powermaster Plus" 30...

1 Answer

Why is my gun bending nails?


Adjust the Work Contacting Element. See page 4 in the manual...
http://www.paslode.com/owners-manuals.html

Adjust the depth of drive.

Make sure correct fasteners are being used.
Use fasteners that meet Paslode specifications only.

Increase air flow to tool -- use larger air lines
(3/8 ID minimum).

Increase Air Pressure. DO NOT EXCEED 120 PSI.

Jul 23, 2014 | Paslode F350S PowerMaster Plus 30-Degree...

1 Answer

Air nailer bends nails


could be couple problems first make sure using the right type of nails I.E. collation and degree of angle. Next look for jammed nail in the nose area and then look at the nose condition for excessive wear and lastly look at the tip of the driver for wear and not being square so it drives the nail straight.

Sep 24, 2010 | Dewalt Round Head Framing Nailer D51845

1 Answer

Paslode Impulse Framing Nailer won't operate


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



[\[]]\

May 10, 2010 | Omega Paslode 901000 Impulse Cordless...

1 Answer

Will the paslode 900420 discharge two nails at the same time.


Stick with the paslode brands nails... the money you save using other brands is off-set by higher maintenance costs and tool down-time

May 03, 2010 | RTO PasLode 900420 Impulse Framing Nailer

2 Answers

Will bosch nail guns operate with Paslode brand nails?


The F28WW takes 28Deg nails that are collated with wire, so your nails won't work in that gun. The N80SB is also a 28Deg nailer so your 30 Deg nails won't work in that gun either. Sorry about the bad news but it looks like your going to have to spring for new nails

Jun 11, 2009 | Stanley Bostitch N80CB Coil Framing Nailer

2 Answers

Campbell Hausfeld 3 1/2 framing nailer bends the nails


It is not the best brand but, it should work for a few projects. Increase the air flow and make sure it is lubercated. It is designed to shoot nails into soft wood, like pine. It could be a o-ring blown or damaged, which is easy and inexpensive to repair. Good luck. Phil.

Feb 21, 2009 | Campbell Hausfeld 3 1/2" Rh Fram Nailer

Not finding what you are looking for?
Air Tools & Compressors Logo

Related Topics:

573 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1388 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

205 Answers

Brad Brown

Level 3 Expert

16614 Answers

Are you an Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...