Question about Wharfedale DVD-M3 DVD Player

Open Question

Wharfedale dvdrhd400 will not power up

My dvdrhd 400 will not power up either with the front button or with the remote control.
The little blue light stays on continuously but nothing else happens.
I have looked for a reset button but to no avail.
I have also tried disconnecting the power and reconnecting but again noyhing happens but the little blue light.

Posted by on

  • EmmaK Feb 26, 2012

    I have the same problem. I bought the DVDRHD400 about 3 years ago. It was working fine until last week, when it suddenly didn't power up but the blue light is constantly on.. I have opened it up to see if any of the parts got burnt or damaged but everything seems to be OK. There is only a very low buzzing sound and nothing else. If anyone knows what the problem could be and if it can be easily fixed, please reply. Many thanks in advance!

  • EmmaK Feb 26, 2012

    I have the same problem. I bought the DVDRHD400 about 3 years ago. It was working fine until last week, when it suddenly didn't power up but the blue light is constantly on.. I have opened it up to see if any of the parts got burnt or damaged but everything seems to be OK. There is only a very low buzzing sound and nothing else. If anyone knows what the problem could be and if it can be easily fixed, please reply. Many thanks in advance!

×

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: wharfedale dvdrhd400 dvd recorder with 80gb hard disk drive

1. Place a blank DVD in the tray.
2. Go to the HDD contents list.
Press the ADD button on your remote to select the files to transfer. At the top of the screen you should see the amount of space remaining on the DVD.
3. Press the REC/DUB button to start recording.
4. Once finished, go the DVD contents list. Press the UP button to go to the topmost screen. Press the RIGHT button to get the menu and select FINALISE to close the DVD.

Posted on Jan 15, 2008

Ad
cygnet
  • 3 Answers

SOURCE: Wharfedale dvdrhd400 problems

posted by msladsy on Dec 21, 2007
Report abuse


When the initial set up ran for the DVD recorder it set the correct time and, I assume, the correct date.
However, I had problems with the display and went through various settings until I solved the display problem.
Unfortunately, during the process, which included disconnecting the power, the clock was reset, starting at midnight and 1st January. There appears to be no way to access the clock.
How do I get the recorder to display the correct date/time?

Mark

Comment by msladsy, posted on Dec 21, 2007

This solution may work for other Wharfedale DVD recorders as well as the DVDRHD400F.
Use your Setup button to acces the 'Setup' menu.
Choose the 'Preferences' menu.
Choose 'Factory Defaults' and click on 'OK'.
The recorder will restore the factory defaults and the first screen it takes you too is the 'Initial Setup' screen where it asks you to enter the correct date and time.

Mark

Comment by msladsy, posted on Dec 22, 2007

May work on similar dvd recorders. Would help if Wharfedale included this in their users manual.

Posted on Jan 28, 2008

  • 1 Answer

SOURCE: Wharfedale DVDRHD400

where can i get a remote for the wharfdale dvdr hd400

Posted on May 16, 2008

  • 1 Answer

SOURCE: progresive scan problem and didn't get picture in tv

Our problem was that we could not get picture on the tv screen but it got sound.We tried to solve it using different techniques like the setup,video source,function keys pressed on remote control by trial(only assumed) and error as we could not see the screen and I used scart with every conection but three point pin was free so I put only one pin in video out put and at that moment I could see the picture on tv.

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I synce wii remotes


instructions
  1. You will first need to make sure your Wii remotes have batteries. Then, turn on your Wii and go to the Wii menu.

  2. Open the little white door on the front of the Wii game console (this may require using your fingernail). You will notice a little rectangular red button.

  3. Open the battery compartment of your Wii controller, which may require removing the rubber jacket. You will notice a little round red button there.

  4. Press and hold the red button on the Wii game system and the red button on the Wii remote at the same time for at least 2 seconds. I usually hold down the remote button, then press the game console button for 2 seconds because it is easier for me. You will notice the 4 little blue lights on the front of the controller blink many times. The lights will eventually stop blinking and one of the four lights will remain on. The light that remains on tells which number Wii remote you have. The one on the left is number 1. The second from the left is number 2, etc.
***
If you bring your remotes to a friend's house to play, don't forget to sync your remotes back to your Wii console when you get home.


All the best!
Tsunami Dan


Read more: HERE

Mar 29, 2011 | Video Game Consoles & Games

Tip

Wharfedale M5 DVD Region Free Fix


Wharfedale M5 DVD Player Region Free Fix


1b27df5.jpg




Would you like to unlock your Wharfedale M5 DVD Player to Region Free?

Follow these steps to unlock your Wharfedale M5 DVD Player:

  1. Press the Setup button on your remote control.
  2. Press the buttons 6, 2, 8, 3 and then 6 on your remote control.
  3. In the Regions Setting - Factory Menu page, set a specific region or choose All for Region Free playback.
  4. Press the Setup button on your remote control to exit the menu.

Your Wharfedale M5 DVD Player is now Region Free.

I hope that helps.

on Apr 25, 2010 | Televison & Video

Tip

Syncing your Wii-mote to your Nintendo Wii


So you just bought a new Nintendo Wii Remote Controller but when you click the power button the four blue lights at the bottom just blink huh? Well that just means your Remote needs to be synchronized to your Wii.

Here are simple step by step instructions to do so.

1) Turn on your Nintendo Wii.
2) Open the door on the front of your Wii covering the SD card slot and the SYNC button.
2f72a6b.png
3) Open the battery compartment on the back of your Wii-Remote Controller.
ce78311.png
4) Press the red SYNC button on your Wii.
5) Press the little red SYNC button on your Wii-Mote.
6) Wait until a solid blue LED light comes on on one of the four lights at the bottom.
7) If it doesn't work the first time, try again.
Your Wii-Mote should now be synchronized.

on Dec 21, 2009 | Nintendo Wii Remote Controller

1 Answer

Wharfedale 80GB DVD HDD Recorder DVDRHD400 USER


remote not operating, unit working otherwise, h/d not full, dvd's play ok

Oct 26, 2009 | Televison & Video

1 Answer

Progresive scan problem and didn't get picture in tv


Our problem was that we could not get picture on the tv screen but it got sound.We tried to solve it using different techniques like the setup,video source,function keys pressed on remote control by trial(only assumed) and error as we could not see the screen and I used scart with every conection but three point pin was free so I put only one pin in video out put and at that moment I could see the picture on tv.

Jan 30, 2009 | Wharfedale DVD-M3 DVD Player

2 Answers

WHARFEDALE DVDRHD400


when you have split and seperated the part of the viceo you want to put onto a dvd, highlight it on the list of recordings and press the blue "playlist +" button on the remote. This will have added the recording onto the list of items to be recorded to dvd. Now press the red "RECORD/DUB" button. This will then record the file to the disc.

When y ou are notified that the process is complete,you will need to finalise the disc in order for it to be playable on other machines.
While the DVD is still in the drive uses the blue "function" button, and select DVD.
Shortly a list of titles on the DVD you have recorded will appear. Press the "UP" arrow on the remote once and a new menu will appear. One of the options here is to finalize disc. hilght this option and click the "RIGHT" arrow once - press "select" to finalise the disc.

Aug 30, 2008 | Wharfedale DVD-M3 DVD Player

1 Answer

Wharfedale LCD3210AF


dose any 1 now how to fix this problem, i turn on my tv the light is just BLUE, the red light aint showing

Jul 10, 2008 | Televison & Video

1 Answer

Wharfedale DVDRHD400


where can i get a remote for the wharfdale dvdr hd400

Jan 15, 2008 | Wharfedale DVD-M3 DVD Player

3 Answers

Wharfedale dvdrhd400 problems


I also had this problem. From the set up menu I reset it to the original settings and now it turns on with the remote no problem. Just wish I could get the sound to work now!

Nov 15, 2007 | Wharfedale DVD-M3 DVD Player

Not finding what you are looking for?
Wharfedale DVD-M3 DVD Player Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wharfedale Televison & Video Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

Jonathon summesfield

Level 2 Expert

285 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Wharfedale Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...