Question about Standard (CRT) Televisions

2 Answers

Sound problem I had purchased my Panasonic Model TX28LKIP TV in Warsaw (Poland). Now brought the same to London. While watching the video films through VCR the sound is just fine, but when connected to cable channels the sound is not coming only noise is heard. Please help me to fix the problem.

Posted by on

2 Answers

Re: Sound problem

I have not repeat not rated shadow 5599's solution as not helpful.  I believe he is very helpful person and tried to help me out.  I am sorry for not replying to you as I was not keeping well for few days.  Shadow5599 has correctly pointed out that it is due to incompatibility.  I rate his solution as very good.

Posted on Oct 25, 2007

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Contributor
  • 51 Answers
Re: Sound problem

If you have your vcr connected via the RCA audio/video jacks, pull those out.
Or check your tv's menu for sound source selection.

Posted on Oct 16, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

What product would I require to hook up my Compaq laptop to my old TV Sony Trinitron to be able to watch films??

It all depend what output is available on your laptop. From what i see on internet your TV has front input for sound and composite video (yellow plug).
If you have VGA connector on laptop than you can purchase VGA to Composite video adapter, sound will come from ear phone output on your laptop.
If your laptop has only HDMI output, than you can buy HDMI to Composit (S-Video) adapter. Those have also audio out since HDMI carry both sound and video.
You can check internet for where to purchase those in your area.

Feb 07, 2015 | Sony Standard (CRT) Televisions

1 Answer

Will my Australian DVD recorder & Plasma TV work in the USA?

Hi. No they won't work. Different systems here (found out the hard way). Ironically we are now moving back to Australia from New Jersey and we have nearly the exact same system that we have to sell before coming back !

Jan 19, 2009 | Standard (CRT) Televisions

1 Answer

Can't change our Panasonic TV channel to watch DVD input

Buy a 21 way scart.This will have an 'AV' enable connection built in. After fitting, turn on the TV, then turn on the DVD player. It will automatically enable the DVD through the scart socket.

Nov 10, 2008 | Panasonic CT-32SX31 32" TV

1 Answer

Panasonic Stereo Colour TV - simple solution did not work

no no dont ditch the tv, your tv not having a big problem its a small one,TV mechanic or panasonic tv care center can easyle fix your problem, your problem is shortout by spending few mony....

Oct 19, 2008 | Standard (CRT) Televisions

1 Answer


My phillips tv model # 55pl9773/17 sound is too low when im watching regular tv, but when i switch from tv to av1 or av2 (watching a dvd movie or playing video games) the sound is normal. How do i get my cable TV to sound the same?

Sep 28, 2008 | Standard (CRT) Televisions

1 Answer

Sound only works when vcr is turned on

When not watching a tape, be sure power is off ( VCR ).....
How is the picture...? When you watch tapes, do you put the
TV on channel 3 or select video..? Also, what is signal source ?
Cable ? Box ?.....................T.

Dec 05, 2007 | Panasonic CT-27G13 TV

1 Answer

Sound problem in Panasonic TV bought in Poland

your friend is right you require pal system to run tv properly.

on the back side of your tv there might be switch pal/ntsc

if that system change over switch is not there then you are helpless

good luck.

Oct 17, 2007 | Standard (CRT) Televisions

1 Answer

A lot of white noise appearing on Panasonic CT-27SL13 27 using COMCAST

You maist likely have bad ground connections inside the tuner of this TV set. Good Luck

Jun 23, 2007 | Panasonic CT-27SL13 27" TV

2 Answers

No video/audio when TV is turned on..

This set is popular for the main voltage regulator to be bad. If you have a meter check the input voltage . it should be between 135 to 159 vdc. Now pin 4 should be aroud 125 to 130 when you switch the set on. Hope this helps Good Luck

Jun 02, 2006 | Panasonic CT-27SL14 27" TV

1 Answer

Component Input

To save cost on this model, as with many others they are sharing the S-Video input circuits with the composite input circuits at the entry point. There is a kill switch incorporated with the S-Video jack in the set. Even if you put an external switch box to the set, the composite video will not work unless the S-Video plug is pulled. Your best solution is to get a TV set with a true multiple video input. The other alternative is to have a sat receiver with an external input for throughput feeding. Another alternative, but not as good quality as S-Video, is to use your sat receiver in the composite mode to the set, and have an external switch box to select one or the other.

Sep 17, 2005 | Panasonic CT-27SC13 27" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66352 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides