Question about Electrolux EIFLW55HIW Front Load Washer with IQ-Touch Controls

2 Answers

New Install Went Fine Until E32 Message After Install Cycle - what the heck is an E32 error?

I just received my Electrolux EIFLW55HIW yesterday and installed it. Everything seemed to go smoothly until I ran the Install Cycle and ended up with a code E32 and a message to call service. Service said it was an issue with the "pressure sensor," but declined to give more details. What the heck is an E32?

Posted by on

  • JayLT May 24, 2009

    ELECTROLUX Washing Machines EIFLW55HI

    4 Months old and now receiving Error Code E32

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Pull hose off of pressure sensor blow through it to clear blockage put back together. Run a clean cycle with bleach. Hose gets clogged from fabric softener and detergent and sensor cant read pressure.

Posted on Oct 03, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

E32 indicates a problem with the pressure sensor. The service manual says to check the wiring (replace if bad), replace the sensor, if problems persist, replace the main circuit board.

There's a copy of the service manual inside the machine - remove two screws in the back and take off the top. The manual includes the error codes and the steps to take.

Posted on Nov 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is electroklux washer code E00


Hi friend, thank you for your inquiry!

On an Electrolux washer the error code "E00" stands for No code stored. This could be a miscommunication I would recommend you perform a reset on your washer. You can do this by flipping the household breaker for roughly ten minutes. If resetting the power does not correct the issue, could you please inform me of the new error code or if your washer continues to display "E00". I look forward to assisting you. -Matt

Aug 14, 2014 | Electrolux EIFLW55HIW Front Load Washer...

1 Answer

Electrolus front load washer door won't open


Hello - Try resetting the unit by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes. If the door does not open, then it sounds like the washer is possibly experiencing a communication problem with the control board, wiring failure or faulty door lock. Contact a professional to move forward accurately to properly diagnose/repair unit.

Nov 20, 2012 | Electrolux Eiflw55hiw Front Load Washer...

1 Answer

E35 error code


chec the drain pump, if there is a coin blockingthe whole

Nov 02, 2012 | Electrolux EIFLW55HIW Front Load Washer...

1 Answer

Electrolux EWF 1495, spin does not work in quick60 cycle


it,ll will be a circuit board fault, probally the motor inverter board there is 3 pcbs in this model.

May 27, 2010 | Electrolux EIFLW55HIW Front Load Washer...

3 Answers

My new electrolux front loader is not filling with water during the wash cycle. The clothes are soaked, but there is NO extra water in the bottom of the tub. It does have extra water in there during the...


front loader washers fill accourding to how big the load size is on all front load washers.There should be no water above the center with a full load.If it is spinnig out and draining then it is working properly:)

Apr 21, 2010 | Electrolux EIFLW55HIW Front Load Washer...

1 Answer

Check hose error on electrolux wave touch washing machine


I'm sure nojallo1 has already fixed his but I just ran into the same problem and didn't find anything in my searches for a solution. The problem I had was the test cycle wasn't long enough to get hot water through my water lines so it could verify the hot and cold hoses were in the proper places. Solution: Turn the hot water on in all the sinks in your house until they have hot water running through them. This will prime your hot water line so it is full of hot water instead of cold water. Then run the install cycle again and it should be fine.

May 17, 2009 | Electrolux EW1000i Front Load Washer

1 Answer

Washer lights are all flashing


Hi friend.....
It is an indication of an error code,,,,,,,did you see any error code on timer.........

thank u..........

May 03, 2009 | Electrolux EIFLW55HIW Front Load Washer...

Not finding what you are looking for?
Electrolux EIFLW55HIW Front Load Washer with IQ-Touch Controls Logo

2,942 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

Are you an Electrolux Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...