Question about Epson Stylus C46 InkJet Printer

1 Answer

Won't go back online

I plugged my Macbook into the printer - it recognised it right away and started printing without problem. After about 10 pages of print, the right light went on and it stopped.  When I press the 'online' button to get it back online, it skips and hiccups for about 5 seconds close to the right hand side of the print track. Turning it on and off or unplugging it from the laptop doesn't make a difference. 
I don't think it's a problem with connecting it to my macbook, as it worked fine right at the beginning. 

The printer still shows up in my printer options file, but it now has a little circle with an exclamation mark in it next to it.

Help, please! 

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 556 Answers

The manuals,online guide and trouble shooting sections could help you resolve your problem. Contact support has a chat facility on some pages that may help.

Click this Link

Under Select a Product Range
Choose Inkjet Printerswon't go back online - 4.gif on the webpage1.gif
Under Select a Product
Choose Stylus C46 on the webpage
Under Select an OS
Choose the operating system1.gif on the machine where you will install the printer on the webpage
Click Confirm Selection

The manuals and documentation link will allow you to download manuals that were on your CD ROM

you may want to bookmark the online guide, if present, to help with future problems -- that probably was not on the CD

Click the back button on the browser

click the Drivers and Software Link

This allows you to download software files that were probably on your installation CD

Click the back button on the browser again

Trouble Shooting and Contact Support could be an interesting link in the future too when and if you have problems.

I hope this helps

Posted on Dec 16, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Printer prints random characters

Hi Erica,Try to shut it off, but if you can't, unplug it. Then try canceling it and plug it back in.
In Case You Still face Problem and Need Online Assistance Then Please Follow Us For On :
Brother Printer Support

Feb 06, 2014 | Brother Office Equipment & Supplies

1 Answer

Kyocera prints garbage

driver issue. download latest driver and update printer firmware

Feb 09, 2013 | Kyocera FS-920 Laser Printer

1 Answer

Getting a black line on paper when printer warms up...

Black lines on copy come from toner cartridge, or drum unit, or fuser unit which is in the back. check drum and see if you can see line, back of machine with flash light you may be able to see line on fuser roller. Be carefull Fuser is hot.
A copy that is good and then starts to get lines usually the drum unit...

Mar 26, 2017 | Brother MFC-9840CDW Laser Printer

1 Answer

Printer won't print - Acts like it is printing but come out blank.

I assume you have good full ink cartridges in the machine.

Go to your printer set up by clicking on START in the lower right hand corner of your screen then click CONTROL PANEL then look for printers - may be under DEVICES AND PRINTERS. Then make sure the correct printer is online in the drop down menu. Look around the choices after that and see if the test page will print properly. Good luck. Pete

Jul 15, 2011 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

Installed new 28 and 29 cartridges in lexmark x2550 and it won't recognise the cartridge and won't print at all, very frustrating please help urgently

It could be that your cartridges need some cleaning. On your computer, launch the Lexmark Solution Center. Click Start menu > Programs or All Programs >Lexmark 2500 Series > Lexmark Solution Center. From the Maintenance tab, select Clean to fix horizontal streaks. Your printer will then print a page forcing ink through the cartridge nozzles and clean them. Try to print again.

Jun 29, 2011 | Lexmark X2550 All-In-One Printer

1 Answer

My printer won't print from computer to printer

hi there,
1- go to your printers folder and make sure the printer is online and your P4350 is set as default (checked).
2- If offline, right click on the printer icon and try to switch it back to online. The same to make it default in case it's not.
2- Once online, then right click on the printer icon again , go to properties and then try printing a test page from windows (I am assuming you are running Windows)
3- In case you were not able to bring it back online, turn off the printer, turn off your PC, reseat the printer cable connection between the printer and the computer (both ends), then turn the printer and the computer back on.

Jun 26, 2011 | Lexmark P4350 All-In-One InkJet Printer

2 Answers

Good problem for hp k7100 need to reset.

i have this hp officejet k7100...
it doesnt recognise the computer when i click on add a printer, choosing plug and play..

Jan 28, 2011 | HP OfficeJet K7100 Photo inkJet Printer

1 Answer

On this page

goes to my printers page right click on printer select open in print queue select print job the click on stop printing

Apr 20, 2009 | Computers & Internet

1 Answer

Macbook and printer problem

Try a different USB cable if plugged that way, or if you have a USB hub, bypass hub an connect direct

Mar 21, 2009 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Tally t2280 does not recognise the page breaks.

self test not printing & printer is offline mode

May 30, 2007 | Tally Matrix T2280 Printer

Not finding what you are looking for?
Epson Stylus C46 InkJet Printer Logo

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Alun Cox

Level 3 Expert

2678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18419 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides