Question about Creative Labs Gigaworks S750 Computer Speakers

3 Answers

3 Gigaworks S750 dont work after a central electric power failure

I have a Creative Audigy 2 ZS soundcard and Gigaworks S750 system. Yesterday when I arrived late at home, I realized that I had a power failure in the house (I live in Romania now...so go figure). The computer has a UPS so no problem there but the speaker system was conected through a converter to the outlet.

Now, the problem consists of 3 out of the 7 speakers now have a white noise (which means are not burned out): the front and the left and right side speakers. The two on the front and the back work as before and the subwoofer as well. I reinstaled the creative software and upgraded the drivers but still the same problem. I run the calibration and that did not solved the problem. I run music and on those above mentioned did not hear anything but the same noise..

What could it be the problem?

Posted by on

  • 3 more comments 
  • florinj Oct 16, 2007

    Well, I dont think is the problem with the music. I tried to play a game and had the same problem. On sunday I played two games and had no sound problem at all. Those speakers do not respond at all. I used creative software calibration and again those speakers did not respond but just low level noise.

  • EASYWINNER Aug 22, 2008

    FLASHING POWER LIGHT, NO SOUND

  • Anonymous Sep 11, 2008

    I have the exact same problem, but I haven't had any power outage like described in this situation. I just get white noise from three of my speakers, one of them the front. The rest of the system sounds to be working perfectly...

  • Anonymous Nov 14, 2008

    flashing light, no sound

  • sanju27777 Feb 05, 2009

    i want to connect these speaker system to my DVD player but i fail. Creative Gigaworks S750 creats a great problem for users.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Gjghj

Posted on Nov 03, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

If you want i will buy the sub off of you i am into audio and could use the woofer you can keep the 7speakers to use on a 7.1 receiver

Posted on Mar 02, 2009

  • EastPointePr Mar 02, 2009

    I have a creative preamp that was made just for this system that will allow you to connected them to a DVD player if you want to buy it i dont need it anymore cause my sub failed

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 425 Answers

Based on my understanding on electronics. maybe the 3 speakers your talking about doesnt resoponds to the frequencies on the music you are playing because a 7.1 souround speakers, each speakers are designed to respond at a certain frequecies.

So try playing movies instead of music and try lowering or not connecting the rest of the speakers and listen closely to the 3 speakers your talking about if you hear any sounds at all...

 

hope it help...

 

send me feedbacks...

Posted on Oct 16, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Creative Gigaworks S700 i have checked both fuses still no power to control box


Stupid question: does the sound still work? it could be the LED just died after continual use (rare, since they last a long time, but not uncommon).
If not... it could be the controlling circuit board died. In which case, unless you have electronics repair experience, it would be probably more worthwhile to just replace the speakers, as pricey a model as it is.

Mar 23, 2012 | Creative Labs Gigaworks S750 Computer...

Tip

How To Install Your Sound Blaster Audigy, Audigy 2, and Audigy 4 In Windows...


This download is a driver and sound card applications providing Microsoft® Windows® 7, Windows Vista® and Windows XP support for Creative Sound Blaster® Audigy® series of audio devices.

This download supports the following audio devices only:
  • Sound Blaster Audigy including Platinum and Platinum eX series
  • Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
  • Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
  • Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
  • Sound Blaster Audigy 2 ZS Notebook PCMCIA
DO NOT install this driver for Sound Blaster Audigy LS, Sound Blaster Audigy SE, or Sound Blaster Audigy Value.

Included in this download:
  • Creative Audigy, Audigy 2, and Audigy 4 Driver 6.0.1.1377
  • Creative ALchemy 1.41.02
  • Creative Audio Console 1.31.10
  • Creative Graphic Equalizer 2.00.65
  • Creative Dolby Digital Live Pack 3.00.03
  • Creative DDL License Activation 1.00.04
  • Creative MediaSource DVD-Audio Player 2.00.78
  • Creative EAX Console 3.00.56
  • Creative SoundFont Bank Manager 3.21.00
  • Creative Speaker Settings 2.00.60

To install this driver:
  1. Download the Audigy_SBAX_PCDRV_LB_2_18_0017.exe file onto your local hard disk.
  2. Double-click the downloaded file.
  3. Follow the instructions on the screen.

on Feb 26, 2011 | Computers & Internet

1 Answer

Need a driver for creative sound blaster audigy 2 zs to mac


here you go

http://downloadnew.org/drivers/other-drivers-tools/creative-sound-blaster-audigy-2-zs-notebook-feature-mode-selection-utility-96400.html

Mar 10, 2010 | Creative Labs Sound Blaster Audigy 2 ZS...

1 Answer

I have a Creative Sound Blaster Audigy 2 ZS


Try to reinsert the microphone. Was it working b4 u have installed drivers. The drivers tat u installed should b compatible to ur motherboard.
Check the audio driver connection inside ur cabinet (front panel)
If u use audio splitter, sometimes the microphone may not work

Dec 08, 2009 | Creative Labs SoundBlaster Audigy 2 ZS...

1 Answer

My sound blaster audigy wont work in windows 7, i want to know if there is installer for windows 7


Hello,

If this is an Audigy 2 ZS as the heading says, you can download the Win7 driver at:

Audigy 2 ZS Drivers

If it is not an Audigy 2 ZS you can select the exact model at:

Creative Labs Product Selection

Click Audigy and then select your model #, then click Next.

Thanks fro using Fixya.

Dec 03, 2009 | Creative Labs Sound Blaster Audigy 2 ZS...

1 Answer

Ive got creative inspire T7900 7.1 speaker system attached to my pc.one of the speaker connections in sub-woofer is faulty ? the sub-woofer seems to be a sealed unit so cant take panel off to have a look...


Is this connecting to a sound blaster audigy 2 zs or xfi soundcard? or a motherboard onboard soundcard/ aftermarket Other than creative?

If connected to the creative card odds are the wire is bad. get a new one

If connected to a generic the wires for the speakers are proprietary and you have to go get 3.5 to 3.5 stereo cables to hook it up

Sep 04, 2009 | Creative Labs Inspire T7900 Computer...

1 Answer

Suddenly my speaker volume is low and scratchy


Congrats, you yourself is a good troubleshooter. Just pinpointed your problem. What you just diagnoist can be easilly checked just by taking other good known speaker. If that works your speaker is short check for audio output wires. If not your card needs replacement. If need further clarifications just comment.

Aug 04, 2009 | Creative Labs Gigaworks S750 Computer...

1 Answer

No sound from soundBlaster Audigy 2 ZS PCI Internal sound card


1st Download Driver from this site Creative Sound Driver
Installation of Sound Card.
  • Go to the control panel
  • Click on the System Icon
  • Click on the Hardware Tab
  • Click on the Device Manager then
  • Select the Multimedia Controller or Audio Control the yellow Question Marks sign on it.
  • Right click on Multimedia Controller and uninstall it.
  • After this go to the top of the device manager and click on scan for hardware changes.
  • Driver installation Wizard start.
  • Brows Your Driver from the Hard Disk and click on next.
  • Driver will be install.

Jun 28, 2008 | Creative Labs Soundcards: Sound Blaster...

Not finding what you are looking for?
Creative Labs Gigaworks S750 Computer Speakers Logo

751 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

620 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mohamed Ismail
Mohamed Ismail

Level 3 Expert

462 Answers

Are you a Creative Labs Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...