Question about Whirlpool Dryers

1 Answer

It takes my whirlpool dryer three or four cycles to dry clothes

I have a whirpool dryer model LER4634jq0. It is ten years old and has worked fine until last year. It is taking longer to fully dry the clothes. It now takes three cycles instead of one. Any thoughts???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 460 Answers

Kenmore Dryers are almost all the same therefore am sending this;

http://www.youtube.com/watch?v=lHkIK8oy1K4

How to Clean a Dryer Vent Video

http://www.youtube.com/watch?v=5Dj4im31lRY&feature=related

Why is so inportant to clean the lint?

http://www.youtube.com/watch?v=9kxbF31Oh4s&NR=1

It was helpful?

Posted on May 15, 2009

  • VIRGINIA MARTINEZ
    VIRGINIA MARTINEZ May 15, 2009

    If you still have problems please let me know.

    thank you

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A WHIRPOOL DRYER MODEL LEQ8858JQ1, AND IT TAKES TWO DRY CYCLES TO DRY MY CLOTH, DO YOU KNOW WHY, IT IT THE HEATING ELEMENT THAT NEEDS TO BE REPLACED OR SHOULD I CHECK SOMEWHERE ELSE???


Hi,

If your dryer is not drying like it once did or if you just have nottaken the time to give yourself a clean dryer in a long time then youneed to do that. At least once a year the dryer cleaning should takeplace. Lint build up in the dryer duct is one of the main causesfor your dryer to fail.

Here is the rest of this tip about DryerMaintenance

heatman101

Aug 26, 2011 | Whirlpool LER5636P Electric Dryer

1 Answer

My Neptue dryer wont dry unless I run it more than one cycle. model no. mdg5500awq. all lights work and seems to run fine it just wont dry the cloths unless I run it at least twice and jeans are three or...


Turn dryer on and go outside to the vent and check for a good amount of air coming out. If you do not have a good amount of air coming out, take the exhaust tubes apart and clean.

Jun 07, 2011 | Maytag Neptune MDG5500AW Gas Dryer

1 Answer

Drying on-and-off


I would replace the coils on the burner valve assy.

Mar 17, 2009 | Whirlpool Dryers

1 Answer

Whirlpool Gas Dryer takes 2 or 3 cycles to dry clothes


did you check ALL lines..in and out for clogs!?

Mar 15, 2009 | Dryers

1 Answer

My Dryer has stop producing heat


hi mark it the heating coil in the back of the dryer

Feb 10, 2009 | Whirlpool LER4634J Electric Dryer

1 Answer

Dryer that will not dry well


One of two things... An almost totally blocked vent to the outside or a bad heating element. Remove the vent form the back of the dryer and get a "feel" for how much air flow is coming straight out without any venting connected. Then connect it back up and with the dryer running, go outside and give it the "feel test" judging as close as you can the percentage of air flow loss through the house venting. Anything more the 30% air flow loss will cause the dryer to take forever to dry. As far as the heating element, on a Whirpool, it slides up into a plenum in the back as kind of a rack type assembly. Not that difficult to replace by remove wire connecting to it, thermostats attached to it and (probably) two screws that are securing it in the plenum.

Dec 20, 2008 | Whirlpool Washing Machines

1 Answer

Whirlpool ler4634jq0


The gas das't start tere for dryer goes for long time without drying the klotnes

Nov 06, 2008 | Whirlpool LER4634J Electric Dryer

1 Answer

I have a whirlpool super capacity dryer that is very slow drying the clothes. It takes three or four cycles to dry a load of clothes. I've cleaned the lint screen.the exhaust tube and the clothes aren't...


hi .your air duct in the dryer is probably clogged . To repair. remove lint filter 2 screws on the top, remove . lay dryer on floor, front down. remove back panel . remove the air duct, clean all lint thanks the appliance doc

Oct 02, 2008 | Whirlpool Dryers

1 Answer

Whirlpool Dryer LGR7646EQ3 - Auto Dry is not working


I went over the part list and I didnt see a sensor, if it is there it will be two silver wire bars either on the back bulk head or at front right just below the door, possibly your timer has gone south too.
The only item I saw was a dryer cycling thermostat that shuts off heat when a certain temp is reached, here is a link;
http://www.repairclinic.com/SmartSearch/SSPartDetail.aspx?PartID=2893&PPStack=1

Sep 16, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...