Question about Nu Mark Numark Cd-Mix-2 Dual CD Player/Mixer Combo - Good CD Player

Open Question

Numark CD Mix 2 - PCB Mixer assembly 2 wire harness connection

I've installed a PCB, Mixer Assembly - CD Mix-2/3 704-MX3-5872. and I have a problem with a 2 wire harness (r) red & (b) black that attaches to the PCB, Control/Display (1st version) - CD Mix-2 704-CDMIX2-3174. I don't know if the (r) wire connects on the left are right side. When I connect it either way it lights up...I just want to connect it correctly, to avoid future problems.

Thanks

Posted by on

  • cinema10_mus May 15, 2009

    Also on the PCB, Control/Display (1st version) - CD Mix-2 704-CDMIX2-3174 the marking is CN202, IR1 & IR2.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

djnick989
  • 1067 Answers

SOURCE: Numark cdmix2 bpm counter

its for the count of a cd hit it on button sumware tap it in touch of speed temp o u wanna use beat match to anther cd bit count ok so tho both match up speed dual mode

Posted on Jan 23, 2008

robotek
  • 1512 Answers

SOURCE: Numark CD mix 2

Hi aondj

I would remove the back panel, and get access to the soldering of the connectors that are giving you trouble. resolder them, and see how you go. Get back to me here if this does not cure it and we shall get into it further

regards
Graeme

Posted on Apr 12, 2008

SOURCE: numark

You need a new adaptor...the wires have lost their connection in the cable or plug which isnt user servicable
KK

Posted on Sep 27, 2008

  • 6 Answers

SOURCE: Numark Cd-Mix-2 left side disk problem

Cd drawer and laser assembly are belt driven. Belt needs to be replaced

Posted on Dec 14, 2008

SOURCE: numark cd mix 2 is not reading disk on left side

First clean the laser lens

Posted on Jun 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Right hand deck makes ticking sound & will not read cd


The laser pickup is shot, the whole assembly will need to be replaced in order to get it up and running properly.

Apr 23, 2012 | Nu Mark Numark Cd-Mix-2 Dual CD...

1 Answer

Cd mix 3 will not read cd


I can replace CD drive for you.
Contact me:
digitalrepair@hotmail.com

Mar 01, 2010 | Nu Mark Numark CD-Mix-2 Dual CD...

1 Answer

When playing an ipod or laptop with my numark cd mix 1 is sounds distorted. What could be the problem. Both are plugged into the aux


I would start with the audio jack that you are using from the ipod/laptop to the numark it could be falty. Try also a couple of other audio players and see if you are getting the same results... the plug in on your numark my be faulty or dirty to where you are not getting a good connection to the machine. Hope this helps

Oct 17, 2009 | Nu Mark Numark Cd-Mix-2 Dual CD...

1 Answer

Numark CD MIX1 cd won't read.


Look at the optics assembly itself. I believe that Numark uses Sony optics. There should be a small label on the assembly that says KSS-213 or something similar. Please post the markings here and I should be able to locate a source.

Dan

Sep 13, 2009 | Nu Mark Numark Cd-Mix-2 Dual CD...

1 Answer

Numark Cd-Mix-2 left side disk problem


Cd drawer and laser assembly are belt driven. Belt needs to be replaced

Sep 08, 2008 | Nu Mark Numark Cd-Mix-2 Dual CD...

1 Answer

Numark


You need a new adaptor...the wires have lost their connection in the cable or plug which isnt user servicable
KK

Aug 29, 2008 | Nu Mark Numark Cd-Mix-2 Dual CD...

1 Answer

Numark CD mix 2


Hi aondj

I would remove the back panel, and get access to the soldering of the connectors that are giving you trouble. resolder them, and see how you go. Get back to me here if this does not cure it and we shall get into it further

regards
Graeme

Apr 12, 2008 | Nu Mark Numark Cd-Mix-2 Dual CD...

1 Answer

Numark cd mix 2


Well, it's not that hard to set up. What do you need help with? If you want to know how to connect:

1) The CD units go into the back of the mixer - in the CD / LINE INPUT - Left side on CD / LINE INPUT 1 and Right side to CD / LINE INPUT 2

The output of the mixer - MASTER OUT - goes to the INPUT of your stereo, amplifier, or receiver's LINE INPUT connection.

That's it. Press PLAY on your CD players, and raise the faders/volumes, and your all ready to go.


- TWEAK AV LAB

Nov 30, 2007 | Numark Fusion 494 Complete DJ Package

Not finding what you are looking for?
Nu Mark Numark Cd-Mix-2 Dual CD Player/Mixer Combo - Good CD Player Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nu Mark Audio Players & Recorders Experts

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

da surgen

Level 2 Expert

92 Answers

The Knight
The Knight

Level 3 Expert

73698 Answers

Are you a Nu Mark Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...