At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
you can run a new cirecuit a lot of folks do this just make sure the fuelpump is hooked up to a cir. with engt switch . if u need more help let me know or you can look for the breaks between the asd relay and the fuelpump and before the asd . let me know how u make out
you can run a new cirecuit a lot of folks do this just make sure the fuelpump
is hooked up to a cir. with engt switch . if u need more help let me
know or you can look for the breaks between the asd relay and the fuelpump and before the asd . let me know how u make out
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
cud hav a shift linkage issue or other internal wear-u gutta classic car--they wernt as electronic as now--buy a repair book online or parts place for complete coverage--------got tools
No. The Fuel Pump is controlled by the SBEC Controller through the Auto Shutdown Relay (ASD). For testing purposes and using an Enhanced Scan Tool, both ASD and Fuel Pump operation can be easily tested. Also, the Single Board Engine Controller (SBEC) WHEN Ignition Switch is in the RUN position, requires a distributor reference signal or it will de-energize the ASD.
×