Question about Radio Communications

1 Answer

I just bought a new kenwood tk272 G when i went to have it programmed with the frequencies i needed they could not get the page(which is just our tone) to work right it is on page but it will pick up our fire 1 also. I need the radio when set to page to only go off when we are dispatched.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Radio Commun... Master
  • 1,654 Answers

We are not familiar with your Kenwood model, yet we believe what you are experiencing is a programming issue. During programming (on Motorola equivalent radios) there should be a place where they choose how you want your pager to reacte in combination with the radio. Usually it is as simple as choosing "AND" or "AND/OR" in the signalling section of the programming. You might check back with your Kenwood dealer, or with another Kenwood dealer who is more knowledgeable on your particular model's paging feature.

Posted on May 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought a new Kenwood 2400 to add to the other 2300 radios and I can't get them to communicate even though they are both on channel 1 which should be the same frequency! Help!


The 2300 is Vhf and the 2400 is Uhf. They cannot talk to each other. Not a programming issue, the wrong radio band and it cannot be changed.

Jul 14, 2015 | Kenwood Radio Communications

1 Answer

Can I reprogram my tk-2400 with my PC?


No. It is programmed from the Factory on a chip. Preprogrammed. No software will change it, no hacks. Many Motorola radios like that too. It is two watts, Vhf of Uhf, you did not say. If your existing frequencies are Business Band and in the same frequency band (Vhf or Uhf) you can get it to match those.

Oct 13, 2014 | Kenwood Radio Communications

1 Answer

How to unlock kenwood tk863 radio and download channels


Hi Greg,

As long as you're cloning from one Kenwood TK series to another of the same series, You don't need the keyboard, you need the cloning software, available online at Kenwood.com.

You cannot transfer data between radios via the keyboard anyway.

I Hope this helps you.

Cheers,
Peter

Jan 26, 2012 | Kenwood Radio Communications

1 Answer

I bought additional kenwood tk 2100 radios and they are not sending the signal to my existingones. The fcc numbers and interior tk numbers are the same. How to I get them on the same frequency.


To change the channel frequencies on your TK2100, simply press and hold the PTT switch ("talk button") and Monitor key, then turn the power on. Now press the PTT switch again. The light should change from orange to red and a beep should sound. Next, adjust the channel switch to the channel you wish to program. Now simply press the PTT button to choose between 4 to 8 possible frequencies, depending on your model.
You can find the manual and frequency graphs here: http://www.heritageresale.com/documents/TK2100OwnersManual.pdf

Aug 26, 2011 | Kenwood...

1 Answer

HOW CAN I PROGRAM MY KENWOOD TK768.I DO NOT NEED IT CHANNELIZED


If I am not mistaken the TK 768 can only operate in a channel based manner as it is a land mobile radio, not a ham radio. The TK line is Kenwoods Land Mobile ( commercial trucks, taxi cabs and so on) line. these radios are meant to be operated on specific frequencies that are limited and assigned by the FCC . While the can be reprogrammed for ham radio frequencies legally, being designed for land mobile use, they are limited to the single fequency/frequency pair programmed into the channelized set up they use.

More info is available at www.kenwood.com

Jan 20, 2010 | Computers & Internet

1 Answer

I have a kenwood tk 360 how can i use it to talk to other kenwood radios and what is the monitor switch?


The TK-360 is an 8-channel commercial/business radio that's available with a wide variety programmed frequencies, and operation requires a license. Unlicensed operation could interfere with authorized users and carry a heavy fine/penalty. The MONITOR switch lets you lock onto and listen to one of the programmed frequencies even when you have not specifically been called. You can identify the programmed frequencies by using a frequency counter or a scanner with the "Close Call" feature.

Dec 08, 2009 | Cars & Trucks

1 Answer

I have a Kenwood TK-2160 and I am unable to


the 2160 has a freq range of 144 - 158 only

Jun 12, 2009 | Kenwood...

2 Answers

My new kenwood protalk tk 3130 wont talk to me old 3130


Look at the user manuals for both radios and compare the frequency assignment for each channel. find the ones that match and program the radios to talk to each other.

Patrick

Nov 18, 2008 | Kenwood ProTalk XLS TK-3131 (15 Channels)...

1 Answer

How to unlock the Kenwood TK-3101 2-way radio


let me know first the model of your kenwood radio,coz a lot of kenwood radio has a spicific frequencies or your radio belong to a fixed frequency.

Jan 10, 2008 | Radio Communications

1 Answer

Cannot get 2 tone pager to work


under zone edit change your optional signalling rules to qt dqt and optional signalling then the radio will only hear when all rules are satisfied ie right pl tone and decoded two tone make sure yoou only turn on optional sig on the page channel

Oct 02, 2007 | Radio Communications

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1654 Answers

Brad Brown

Level 3 Expert

15557 Answers

Mike Charette

Level 3 Expert

1795 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...