C350 windows 8 driver - Konica Minolta bizhub 350 All-In-One Laser Printer

Your Konica Minolta Bizhub C350 Digital Copier, Printer and Scanner should come with a CD/DVD which includes the drivers for different operating systems AND a PDF fie with user's manual. Even is possible that yo may fine several PDF files, in different languages.
So open your PDF file and find the section where it describes with enough detail the steps you should follow . Probably there are different procedures depending the version of Windows, MAC or Linux you are using.


http://kseroimpuls.pl/broszury/en-bizhub-c350.pdf

If you don't hat user's manual, get it from here:


Konica Minolta C350 User Manual

To offical konicaminolta website drivers are free.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Download the PS version for printer driver on to konicaminolta support.

el driver

bizhub c350 is not installed properly, the driver you are using are the correct drivers.

You will need to download Windows XP 32 or 64 bit drivers. You can get them from kmbs.konicaminolta.us

To save space, drivers are not a part of the package unless you have the printer connected when you install leopard. If you go backwards and either update or re-install leopard it should install the driver for you.

I guess you mean the c350 is not printing while Windows said the job has been sent? If so, it may have changed IP Address from the time you first install the Printer on Windows. Check the Ports setting of the c350 printer! e.g.
Network Pritners should have Static IP address or at least a reserved DHCP IP Address. Logon to your Router, check the MAC Address of the c350 and reserve/assign it a IP Address near the end of the DHCP range. Save the Router configuration and power cycle the c350. Confirm IP Address changed to the reserved IP. 

Then you have to change all the PC's Printer Configuration of the c350's Port to update the reserved/assigned IP. Or remove the c350 from Printers and Faxes, then run the printer setup software again.

Go to konicaminolta web site and download a mac driver. and install it to Imac. Make sure to download OS10.4 or higher.