HHP 4600 DOES NOT READ MICROPDF417, BUT READS ALL OTHER CODES. WHY?

Ok I have found some info here what you need to do is download the correct driver from this site, install and you should be fine. HHP 3800r? is that the right one? http://www.honeywellaidc.com/Site.aspx/na/en/resources/product_downloads/software/?product=165
This one below is for the HHP 3800r ?
http://www.honeywellaidc.com/Site.aspx/na/en/resources/product_downloads/software/?product=140

You need to program this scanner, I can provide any manuals you need. You can always contact me directly [email protected] or 630-622-2024 toll free 866-271-9891 Ask for Andrew

Please buy an dvd player or writer if u already purchased then install vlc player or powerdvd player

You tell Pip to put back on the K/B wedge and make programers - u know program it to work [8^) lol
sorry for the false positive

The 4600 has PowerDVD to play DVDs (You should have the software CD to install it on the 3000) DVD burning software would be Roxio/Sonic, and you should have that CD too.
If you don't have the CDs, then try download.com to download Free player software and Burning software

Yes, the HHP HandHeld 2D Image Reader (4410lr131) Handheld can read 2D barcodes. This scanner is designed to read 1D and 2D barcodes, making it a versatile tool for a variety of applications. It is also capable of reading multiple barcode types, including PDF417, Data Matrix, and QR codes.

Get a polishing solution, like for CD and DVD's and clean the glass, that should impove dramatica.lly the performance

Jaquino, there is a programming bar code to reset the device to factory settings in the user guide. I know you said that it is reading other bar codes like they are not programming bar codes, but have you tried this bar code? Usually it works, even when the device is totally hosed, unless there is some kind of hardware failure.

Here's the link to the Quick Start from the company website:
http://www.handheld.com/download.aspx?download=/data/f9e7f996-9ecc-4f49-b604-32fbd754085d.pdf&filename=3800+Linear+Series+Quick+Start

The factory reset bar code is on printed page 4 of the PDF document.

In the user manual for this device there should be a code book (or code pages), These are a selection of barcodes which you use to configure the device. One of the settings is to omit the barcode header (which indicates a type of barcode for instance a PART number might begin with P or a Serial number might begin with an S) This barcode system may have been initially programmed to omit these code letters Gareth