Question about Emerson EWF2704 TV

2 Answers

Emerson EWF2705, when pressing power it sounds like it is coming on but nothing happens


  I hope someone can help me, becuz the last place I was on I didn't getting any help at all.  My 27" Flat Screen Emerson TV does not have picture or sound.  When pressing the power button it makes the news that it is coming on, but nothing happens.  I would like to get it fixed, but is it worth getting it fixed?  I only paid $200 for it at WalMart, but don't have that to put out if it will happen all the time.  Please if someone could help me I really would appreciate it.

Thank You,

Debbie Morris

Posted by on

2 Answers

Re: Emerson EWF2705, when pressing power it sounds like it is coming on but nothing happens - Emerson EWF2704 TV Standard...

Thank You Shuttle 83

Posted on Oct 18, 2007

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,139 Answers
Re: Emerson EWF2705, when pressing power it sounds like...

Hello DEBM,


The problem with your television appears to be in the high voltage power supply or the low voltage power supply. The set tries to come on but the shutdown circuitry turns the TV off. The shutdown circuit is a protective measure put into place to prevent overcurrent and overvoltage conditions by shutting down the TV when these conditions exist. If you do not have a background in electronics, might I suggest that you have a TV technician to come to your location and work on the TV.


I hope this helps

Thabk you,


Posted on Oct 17, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Video mode without remote for Emerson EWF2705

You can navigate the menu with the buttons on the TV itself. There should be a menu button and then you use the volume up and down as well as the channel up and down with the enter button to make your selections. Your menu selection for video will be in the input or source section.

Feb 10, 2016 | Emerson Standard (CRT) Televisions

1 Answer

How can I play my Emerson vcr/dvd dual deck to play on my sylvania tvk139k with no remote?

Try pressing the channel down button repeatedly until the lowest channel is displayed. Now keep going to see if it changes to an external port like F1 or R1 If that won't get you a picture try going to shopjimmy website to get a new remote.

Nov 06, 2014 | Standard (CRT) Televisions

1 Answer

Rm500 codes for symphonic tv

Sharing this info for anyone who may find it of some use for other Emerson/Funai/Symphonic tv's...

I stumbled across this on a random day trying once again to figure out the service menu on my Emerson LC320EM8, by basically digging through every funai LCD service manual I could find on funai's german ftp server online. As these remotes seem fairly universal to all Emerson/Funai/Symphonic (as well as Most no names or store branded) tv's......give this a try..

There's a hidden "service" button on the remote located below and in between the locations of the CH +/- and VOL +/- have to cut the bezel on the remote to reveal it...

How to initialize the LCD television:
1. Turn the power on.
2. To enter the service mode, press the service
button on the service remote control unit. (Refer to
page 5-1.)
- To cancel the service mode, Press POWER button on
the remote control unit.
3. Press INFO button on the service remote control
unit to initialize the LCD television.
4. "INITIALIZED" will appear in the upper right of the
screen. "INITIALIZED" color will change to green
from red when initializing is complete.

Hope this info is useful to someone else...

Apr 10, 2014 | Standard (CRT) Televisions

1 Answer

I have a 32 in HD Emerson for some reason last night I was watching a show on Direct TV when the TV went blank . I was instructed no signal so I followed the promptsand it got signal but all I have is a...

Georgine you should have a button on your EMERSON remote that says input or source.
Press that button and a menu should come up with a list of options
use the arrow keys in the center of the remote to highlight VIDEO
Press enter or the circle button in the very middle of the remote

Dec 03, 2010 | Emerson Standard (CRT) Televisions

1 Answer

No sound coming in

Never repaired this one. But that does not mean I can't help you. My first thought is, this TV is being used by kids. You may want to see if there is an object that is stuck in the audio jack, if there is one. And if there is an audio jack, you can almost suspect there is a bad ground on the audio pin jack. That would have to be soldered. There may be a bad ground on a power resistor, a bad ground on the flyback or an open coil. And last note,would be an audio output IC is bad. These are good clues to help you with repairs. Hope this helps and thanks for asking!

Aug 02, 2010 | Emerson SpongeBob SquarePants TV

1 Answer

Vistron 32 " lcd that will not turn on

Sounds like the main power supply board has packed in, you can buy these and are reasonably easil to change your self as all the leads have push on plug connectors and will not go in to the wrong place,

May 31, 2009 | Samsung TXH1370 13" TV

1 Answer

Tv will not turn on


maybe you have defective power oscillation this issue needs to check for a qualified technician


Feb 24, 2009 | Standard (CRT) Televisions

2 Answers

Phillips Magnavox 32MT3305/17

i have a magnavox 32mt3305/17, it has no power the hv transistor is missing,can someone tell me whats that part number and where to find it.thank you..

Sep 02, 2008 | Philips Magnavox 27MS343S 27" TV

2 Answers

Digital Transition

If this a digital ready TV, you won't need a converter box at all.
If not, the converter box is designed to work with all TV's.


Aug 14, 2008 | Standard (CRT) Televisions

1 Answer

Sound but no picture.

The problem with your television appears to be in the high voltage power supply .  This power supply supports the high voltage on the anode of the picture tube, and the voltages for the picture tube, and other parts of the TV. If you do not have a background in electronics, might I suggest that you have a TV technician to come to your location and work on the TV.


I hope this provides some help

Thank you


May 24, 2007 | Emerson EWF2704 TV

Not finding what you are looking for?
Emerson EWF2704 TV Logo

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66518 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you an Emerson Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides