Question about Washing Machines

1 Answer

Water filling issue

My fisher & paykel smart drive 703 7kg washing machine was working fine but now it will start to fill up with water then stop and restrart all over again
can anyone help me out with this problem

Posted by on

  • gucci_1987_1 May 15, 2009

    thanks

    i was just wondering if this is the problem is it hard to fix and would it cost much

    could you help me please if anyone roughly knows

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 144 Answers

It sounds like you have a faulty Out of Balance Micro switch(the machine now thinks it's always out of balance) you'll find this under the motor controller module (main computer module) in the top of the machine on the righthand side. Anymore questions feel free to ask. cheers

Posted on May 15, 2009

  • Steven White
    Steven White May 15, 2009

    If your technically minded it's very easy to fix and you can get a new Microswitch for about $10 I believe cheers

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Smart drive 085


It won't spin until all the water is drained out. The drain pump may be blocked or faulty. Fix the drain pump fault first then deal with the filling issue. They will not be related.

Jun 21, 2017 | Fisher and Paykel (IWL12)

1 Answer

Smart drive 085


the buzzing noise is the pump trying to work, but it cannot due to a blockage. unplug the washer and you can lean the washer backwards and remove the pump to unblock. the fill error is probably unrelated, and is an inlet valve issue.

Sep 25, 2013 | Fisher and Paykel (IWL12)

2 Answers

Fisher and Paaykel Smart Drive 708 not working once filled with water.


You need to check your lid switch & out of balance switch for
corrosion and replace if faulty.
Your out of balance switch is under the big yellow motor controller
OOB switch Is where the grey plate is on this picture.



7b66e5d7-ef00-46de-8c75-820b5b2bfb01.jpg

Mar 03, 2013 | Fisher and Paykel Washing Machines

3 Answers

I have a fisher and paykel smart drive 5.5 that will not sart filling withwater. All the lights are on and the hoses and filters are not clogged


Hi just found your posting.Do you still require help?Sounds like a lid switch fault to me.Does the machine beep when you push the start button.Please reply for further help.Looking forward to your reply.

Oct 09, 2010 | Fisher and Paykel Fisher & Paykel Washer

3 Answers

Starts and stops


A failed inlet valve is not uncommon in F&P machines. The hot valve is different to the cold one, so don't exchange them. Not a big job for a tech to do in-laundry. Good luck....Nomess

Jun 11, 2010 | Fisher and Paykel Fisher & Paykel Washer

2 Answers

Washing machine slow to fill


yes or a water pressure issue, mosty when using hot or warm

May 19, 2010 | Fisher and Paykel Active Smart E522B...

1 Answer

Have kelvinator smart drive 503, water won't run


Hi,

I have exactly the same issue, which first appeared yesterday. Following your advice, the lights that are lit are 3rd, 5th, 7th and 8th. The SLOW & HOLD spin speed lights are lit, along with constant beeping :)

Jun 16, 2009 | Fisher and Paykel GWL11 Top Load Washer

6 Answers

Fisher and paykel 7.5 smartdrive washing machine, no power


If there is power and all your lights are lighting up but you get no responce from the machiene eg no spin, water filling, wash cycle or drain then it will be the sensor for the lid it will have coroded but this is an easy fix , I hope this helps

Feb 20, 2009 | Fisher Paykel Eco IWL16

2 Answers

Fisher and Paykel 6.5 smart drive washer


My F & Paykel washer did this. There was a baby sock under the wash basin. I called for repairman and he found the problem.

Jan 05, 2008 | Fisher and Paykel Fisher Paykel Intuitive...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

436 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...