Question about Linksys Wireless-G RVS4000 Router

2 Answers

Re internet connection loss

Router :2247
from time to time internet light goes red and i have to turn the router off and on again to recover connection.
pther lights remain green. is this a sign of a failing router

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 26 Answers
Re: re internet connection loss

Try updating the firmware of your router. You may download the firmware at . Once downloaded, upload it on the inteface of your router. Once done, do a hard reset on the router. Press and hold the reset button for about 30 - 60 seconds. Also lower down the MTU of the router. Try setting it to 1492.

Please let me know.

Posted on Oct 09, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 12,061 Answers
Re: re internet connection loss

Hi, well it may be, but it indeed just sounds pretty normal to me ... lol  unless it is doing it very frequently?

I would tend to think that it is fairly normal to "Drop Off", "Hang Up" etc  say a few times a month, anything else, may indicate a problem.

Also try disabling Windows XP Service zeroconfiguration wifi this often causes this type of thing sometimes.

Posted on Oct 15, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My router is DG834G v5 and it shows a red light for internet and does not connect ,there is no problem with my pone connection as the old modem is working fine, what do i do?

I understand that you are not able to connect to internet through DG834Gv5 as the internet light on the router is RED. I would suggest you to reset and reconfigure the router using the below steps:


1. Press and hold the Wireless On/Off and WPS buttons simultaneously until the Power LED turns red (about 6 seconds).

2. Release the Wireless On/Off and WPS buttons. The LED blinks red three times and then turn green when the router has reset to the factory default state. Wait for the router to reboot.


1. Connect the cable/phone line coming from Internet Service Provider to the WAN port of the router (isolated port).

2. Connect the computer to the router using any one of the 4 available ports.

3. Open a web browser like Internet Explorer, Mozilla Firefox or Safari.

4. Access the router's GUI by typing '' or '' in the address bar.

5. Login to the router (username = admin password = password unless you have changed it).

6. Click on 'Setup Wizard' at the top of list from the left menu.

7. Select Yes and click Next.

8. It should give you 'PPPoA Detected' and then click on next.

9. Enter the login and password of the ISP and then click on Apply.

10. Once the settings are updated click on 'Router Status' and click on 'Connection Status' button (at the bottom of the page).

11. Click on Connect button.

12. Connecting to server should show 'Connected'.

13. If you receive 'CHAP authentication failed', close the 'Connection status' window and click on 'Basic settings'. Verify the login and password for ISP and apply the setting again.

14. Open up another browser window and try to access internet.

Please do visit for any technical queries regarding NETGEAR products.

I hope this information allows you to resolve this issue.



Feb 25, 2011 | NetGear DG834G Router

1 Answer

Losing connectivity to light goes on on router

Keep the reset button pressed for 3 minutes.
If you have the CD, try to re-install the same router
If you don't, contact the toll-free # 1-800-2235546
Myself or any other technical support executive will assist you further

Jan 22, 2010 | Belkin (F5D5231-4) Router

2 Answers

My wireless router doesn't seem to be working although lights on it suggest otherwise. I unhooked the router cable that goes to the computer and hooked it into my modem in order to at least get some...

so the router has no control. Because you dont have any passw defined on wireless and everybody using your internet connection, and you pay the bill.
so to gain control, of your router , needs to have all internet provider config, on paper before reset router. there a reset button on the back. press for more than 5 sec, until the lights off\red. then go ie and type then enter router site with user: is blank and passw: admin. go 1st wan config. with your internet provider config. and change all router passw even wireless (use WPA2 encription level) and save config on hd and reboots router.

Dec 29, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

Verizon DSL Internet connection intermittant Westell 327

verizon dsl westell 7500 internet light goes off 2 to 3 times daily

Jul 11, 2009 | Westell Wirespeed VersaLink...

3 Answers

Power Light Is Red, Internet Light Is Green, Other Lights Off

Check cable connections.

Try unplugging router from power for five minutes.

If that does not work call Internet Service provider to check if there is a problem with their server.

Apr 10, 2009 | Actiontec GT704WG Wireless Router...

2 Answers

Connected to internet but cannot browse.

hi there ;
there is no such solution for ur problem ..... the only solution is to firstly reset the router for 30 seconds and then upgrade the firmware of the router ..... remove the powercord for 10 seconds ...
> Again redo the settings then ....

Nov 14, 2008 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
Linksys Wireless-G RVS4000 Router Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts


Level 3 Expert

18258 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

4327 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides