Question about Jenn-Air 30 in. Expressions CCGX2420 Gas Cooktop

1 Answer

The gas knobs are in the off position but the auto start is click

The gas knobs are in the off position but the range is trying to ignite the gas with the auto start. One of the knobs light is on as if the knob is turned in the on position. Clicking, clicking, clicking. I finally unplugged the electric connection and turned the gas main off.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Thanks for your question!

I'm sorry that you haven't received an answer yet.

The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...

Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.

Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Sep 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why want middle burner light automatically but will light with a lighter


That unit is suppose to have electronic quartz igniters. Apparently there's a problem but it doesn't automatically mean the igniter needs to be replaced. If you see a spark from the igniter then it's fine. If you see a spark but no flame then the ignition process is out of synchronization. In other words, the gas hasn't concentrated near the spark enough to ignite. This may be a matter of low gas pressure or the extra length the gas needs to flow to reach the center burner is impeding ignition. Simple fix is turn the knob just enough to start the gas for 2 seconds then continue the turn to click the igniter. or simply use a match. You may also see if there are any adjustments on the gas manifold that will enhance bringing more gas to the center burner quicker. Some unit have one click & that's it, others click the igniter continuously until you release turning the knob. Good luck. you'll figure it out.

Aug 13, 2015 | Verona VEFSGE365DSS 36" Double Oven Dual...

1 Answer

Continuous clicking from an igniter in the off position. I have to slightly turn the control knob towards the hi position to stop the clicking and for the light on the control knob to go off


sounds like it was turned a little past the stop point.
Pull two knobs off and examine the back side that slides onto the shaft.
Switch them and try again.
If the problem is on the same burner, the shaft may be turned past its normal stop position.
You can try turning it until it stops in the opposite direction and force it just a tiny bit more.
That was how I fixed mine.

Nov 06, 2013 | DCS 36 in. CP-366 Gas Cooktop

1 Answer

Maytag MGR7775WS igniter does not work


time for a new igniter, you can order it at marcone.com All you need is a model number

Oct 17, 2012 | Maytag MGR7775WS 30" Self Cleaning...

1 Answer

After spraying stainless steel cleaner on the cooktop, with the knobs removed, the igniter won't stop ticking as if it's trying to ignite. All the knobs are securely in the off position. Could this be...


Hi,

Yes, the moisture is probably the problem...



Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...

Gas Range Repair
Burners Keep on Clicking


heatman101


Jan 21, 2011 | GE 30 in. Profile JGP933 Gas Cooktop

1 Answer

My stove is making strange clicking noises. please help.


It sounds like the ignition knob is stuck in the "ignitor" position. Try taking it off, clean it and adjust it. If that doesn't work, it will have to be replaced with a new one. If yu leave it alone, it will probably wear itself out. Just make sure that the gas valves on the stove are in the off position so that they don't accidentally light on their own. Good luck

Jul 13, 2010 | Cooktops

1 Answer

Dcs igniters


clean the knob control by using vaccium,pull the knobs then clean it.make sure how to remove the knob,same position to returrn the knob

Jun 30, 2009 | GE Profile JGP636 Gas Cooktop

1 Answer

Igniter clicking when all four knobs in off position after water spill


It is possible that once the unit dries out the clicking will stop. If it doesn't, you will need to call someone to have the problem addressed. You will need a spark module and or an ignition switch(s).

Oct 28, 2008 | GE 30 in. JGP336 Gas Cooktop

1 Answer

Stuck auto ignition


try easing each knob upwards a bit.

Jul 15, 2008 | Smeg 23 in. SE64 Gas Cooktop

Not finding what you are looking for?
Jenn-Air 30 in. Expressions CCGX2420 Gas Cooktop Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Cooktops Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

paulcarew

Level 3 Expert

2514 Answers

Are you a Jenn-Air Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...