Question about Sharp 25H-M60 TV

1 Answer

Sharp 25H-M60 landlord broke off the cable connector!

I have a Sharp 25H-M60 TV that is in nearly new condition. I love this TV. My landlord brought someone in to FINALLY wire the cable properly and the guy broke the cable connector off my tv. I would like to know what the reasonable cost would be to repair the tv, what the general consensus of opinion should be about replacement value, etc. I'm not looking to rape anybody but I do feel that he should be held responsible, especially after he ignored my calls about this issue.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 126 Answers

Depends i have replaced these alot the part is cheap but you have to be careful when repairing this problem you can really mess the tuner up then it cost more starts any where from 40.00 to 80.00 dollars the parts cost pennys okay it's all labor have a good day tv man

Posted on May 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the size of the screen on this tv


25 inch viewing space
you may also use a tapemeasure and measure from one corner to the opposite corner.

Jun 10, 2014 | Sharp 25H-M60 TV

1 Answer

My 26" 1997 Sharp T.V. model #25H-M60 turns off by itself and won't turn back part of the time.


First thing if you are able is to unplug set and remove rear cover (lay set face down on a padded surface).

entire main board should be able to be seen or released so it slides out--take a very careful look at flyback and rest of board for any cracked or bad solder connections.

One bad connection (age) can cause this.


5_21_2012_3_10_50_pm.jpgtypical high voltage transformer which is also called a flyback transformer.

May 20, 2012 | Sharp 32L-S400 32" TV

1 Answer

1996 sharp tv model # 25H-M60 co-ax pulled out from the circurt board. I removed the back of the tv,and can see the female end is snap off the case that houses the board. Can i solder that back to the...


That is what the service provider would do if you took the television in to be repaired. The service provider would attempt to solder the rf connector back to the television or solder a new rf connector to the television.

Mar 29, 2011 | Sharp 19H-M60 TV

1 Answer

I have a problem conecting my sharp 25h-M60 with my DVD plyer.I have found solution on Fixya. They said I have to use VCR. My question is: What does VCR mean?


If your TV does not have AV inputs (RCA jacks for video and audio), you can't plug the DVD player directly in to the set. One solution is to connect the DVD player to a video cassette recorder (VCR) using the "line in" jacks on the VCR, then using the channel 3 or 4 output from the VCR to the TV. This solution may not work with discs that have copy protection, though, and will give you an unwatchable picture.

For sets with no AV input, you need an RF converter. This is a device that takes the video and audio signals from a DVD player or other device and makes a channel 3 or 4 TV signal to the TV's antenna connector. Converters are available at most retailers where you can buy televisions, as well as online.

Jan 01, 2011 | Sharp 25H-M60 TV

1 Answer

Cable connecter broke off?


It would probably cost more to have someone fix it than just replace it.If you or someone you know can use a solder iron you might get lucky and resolder conections, but most times its too hard to get at the circuit board to affect repairs and the connector usually gets mangled so bad it won't fit right anymore. Or you can try to avoid using this connection and use a different input. But you would need either a cable/satellite box or vcr (with the same kind of connection that broke on TV) and change the input used on the tv to the new connection such as 3 wire AV connection (with the yellow,red and white wires)

Apr 26, 2009 | Sharp 25H-M60 TV

1 Answer

Not able to connect Sharp Model 25h-M60 to Laptop or DVD player


Use a VCR as a A/B switch. Run Cable signal into VCR. Run coax cable out of VCR into television. Connect DVD to VCR (line in) using RCA cables. To use DVD, set VCR channel to L1 or L2 or AUX, depending on VCR type. Set VCR to channel 3 or 4 to watch television. VCR must be powered up to watch DVD.

Apr 10, 2008 | Sharp 25H-M60 TV

1 Answer

Hooking a dvd and vcr to a cable box and tv


You will have to use an audio/video cable for connecting the player to the tv. This cable consists of three wires, generally a white, a red and yellow. Yellow is for video and the other two are for audio. You will find corresponding colored sockets both behind the tv and the player, find out which is the input at the tv and output at the player. Good luck

Jan 30, 2008 | Sharp 25H-M60 TV

1 Answer

Hooking up a Phillips DVD player


may have to change rca cables or s-video cables, or maybe try a new reciever, or maybe goin from dvd player straight to the plasma? hope this helps jason

Dec 06, 2007 | Sharp 25H-M60 TV

1 Answer

Help with my tv


some tv's dont come with rca jacks, what u can do is run your rca's through a vcr and then the vcr to the televison u can do it that way, or take and buy this thing they carry at radio shack, it is a devise that you can hook your dvd player to a junction box that hooks into the same place as a vcr would in the back of your tv, hope this helps jason

May 14, 2007 | Sharp 25H-M60 TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...