Question about Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Cycle signal keeps beeping



The cycle signal on my Kenmore Elite Oasis HE 27072 just keeps beeping when the washer is on.  I have tried to turn it off, but it doesn't work.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: Cycle signal keeps beeping

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I unclog the long drain Kenmore elite oasis?

Honestly, we got rid of the machine and bought a Maytag Neptune. I was over trying to figure out all the codes the Oasis was flashing. We gave up on the first one that started having problems when a friend gave us one identical to ours and it has done a lot of the same things.

Apr 03, 2014 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

My Kenmore Elite Oasis washing machine has error code "UL" while in rising cycle and stop. Can you tell me what is the problem and how to solve it.

My Kenmore Elite Oasis washing machine will drain but not spin and it keeps jumping back and forth to different time cycles. It continually reads "UL" and I keep trying to adjust and balance the load but it does not help.

Jun 25, 2011 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Hello, I have a Kenmore Elite Oasis washer model

On this washer, the dl code indicates a failed lid lock mechanism. Pressing pause/cancel should reset the controls.

You may have to unplug the unit for 20-30 minutes, then restore the power.

If that doesn't work, the only other solution would be to replace the door lock assembly.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!!!!!!!!!!!!!!!

Jun 16, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

Kenmore Elite Oasis HE 27072. Keep getting UL

Check the Vibration damper rods to be sure that...
1. They are there and mount is solid.
2. If they are broken in 1/2.
3. The plastic knuckle mounts are not missing/broken.
4. There is oil in the shock absorber/spring section of the rods.

Also - there are suspension springs on the bottom of the tub that could be broken and/or missing.

Replace/repair as necessary.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Oct 20, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Kenmore Elite Oasis HE 27072 water temp changes

It appears your dual inlet water valve has failed in this instance.

For replacement parts - head on over to or and enter in your full model number for a full parts listing.
I recommend both sites because ...

FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.

If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.

Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Apr 11, 2009 | Kenmore Washing Machines

1 Answer

My kenmore elite oasis runs fine but wont go through spin cycle

Try replacing the motor coupler between the motor and pump three small pieces about 18.00 dollars at sears parts store.

Jan 13, 2009 | Kenmore 23822 Top Load Washer

1 Answer

3 quick beeps during cycle if you can get it to stay in a cycle


Sep 13, 2008 | Kenmore Oasis HE 27062 Top Load Washer

1 Answer

Cycle stops - F error code

I am having the same problem with the "F" flashing and a beep but no numbers. The manual only says to hit the stop button then the start again. It doesn't give you a problem. It then says if this does not work to call a repair man. Mine is only two years old and we loved. I have never had any problem with it but every review I have read says differently and they seem to happen around the two year mark. It seems they have a malfunction timer that goes off at the two year mark. If you find a solution please post again.

Aug 06, 2008 | Washing Machines

Not finding what you are looking for?
Kenmore Oasis HE 27082 Top Load Washer Logo

606 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides