Set up problem

Hit the Apps logo on your home screen ( looks like a dice with 9 dots on it.
Now hit the Settings app ( Blue square with white gearwheel inside)
First apps are Connections ( blue circles with logos inside)
Scroll down past Device apps ( orange circles )
scroll down past Personal apps (Buff circles)
When you get to the System apps ( green circles) hit the first one (This is language and input)
When the menu opens hit the first one (this is language)

Scroll down to find the language of your choice.

Try the following: press Menu and use the Up/Down arrows to navigate to the General Settings. Press OK and then use the same arrows to select Display. Click OK. Again using the Up/Down arrows select Language which should be the item at the top of the list. Make sure that English is highlighted or use the arrows again to select that. Then press OK. Press Menu again to exit the entire menu system. Unfortunately, you will need to navigate through each item from the initial setup individually if any other setting is part of the problem.

Magnavox has the manual for the MDR535H/F7 on their product support page: http://www.m4c.magnavox.com/cgi-bin/cpindex.pl?ctn=MDR535H/F7&hlt=Link_UserManuals&mid=Link_UserManuals&scy=US&slg=AEN . The direct link to the manual is http://download.m4c.magnavox.com/files/m/mdr535h_f7/mdr535h_f7_dfu_aen.pdf . See pages 108 and 109 for the Language setting.

I hope this helps.

Cindy Wells

Tap MENU to bring up the menu. Select the wrench icon for the Setup menu. Select the open book icon for Language. Pick the language of your choice.

Press MENU, then use left/right to select the Setup tab. Language should be the ninth item on this menu. Select it, and you should see "English" as one of the choices.

Press MENU/OK to display the menu. Use up/down to select SET. Press right to display the setup menu. Use left/right to select the wrench with the digit 2 next to it. Press down to enter the menu. The second item on that menu should be Language, so use up/down to select it, then press right to enter. One of the choices should be "English". Highlight it and press MENU/OK.

There is no reset button on this camera. For reseting it follow these steps (from the MANUAL, page 122):

1 In the Setup Menu , select Reset Settings....
2 In the Reset All Settings? sub-menu, highlight one of these
two choices:
? Cancel ? Exits the menu without resetting any of the
settings.
? Yes ? Resets all camera settings to their default value in
the Capture Menu and Setup Menu (except Date & Time,
Language, TV Configuration, and USB Configuration).
3 Press Menu/OK to reset settings and return to the Setup Menu.

Hello

Thank you for using FixYa for your problem.

Try this;

Changing the language on the HP All-in-One displayFollow these steps to change the language on the All-in-One display.

1. Press the Setup button ().
2. Use the arrow buttons () to select Basic Settings, and then press OK.
3. Use the arrow buttons () to select Set Language, and then press OK.
4. Use the arrow buttons () to scroll through the language options until the preferred language is displayed.
5. Press the numbers on the numeric keypad that correspond to the appropriate language displayed on the control panel display.
   NOTE: Ifa selection is not made within five seconds, the display automaticallychanges to show the next language. If a selection is not made withintwo minutes the setup menu exits and the language/region remainsunchanged.
6. Confirm the language choice.
   • Press the number corresponding to Yes to confirm the selected language.
   • Press the number corresponding to No to select a different language.
7. Aftera language is selected, a screen is displayed for region selection.Press the numbers on the numeric keypad that correspond to theappropriate region.
   NOTE: Ifa selection is not made within five seconds, the display automaticallychanges to show the next region. If a selection is not made within twominutes the setup menu exits and the language/region remains unchanged.
8. Confirm the region choice.
   • Press the number corresponding to Yes to confirm the selected region.
   • Press the number corresponding to No to select a different region.

Please Rate my solution or reply for another answer if still not going

Thanks
Richard Scott
Technical Support

You can update the time, date, language and country settings after initial setup by accessing the Setup menu.
Press the Menu button. From the main menu, navigate to Setup mode/menu, using the arrow buttons to scroll through the available menus and the select (check mark) button to confirm your choice.
In Setup, select Language menu. Use the arrow buttons to scroll through the available languages and use the select key to and confirm your choice.

There where 3 language choices in the original MMI software. English, French and Spanish. I assume since you're getting German, the car is an EU A8, not North American. German was not in the North Amercan A8. Only the newer software from MY 07 up have no language choice on startup. It is set under car, setup menu. If you set the language and it defaults back to German, I would at least check with the dealership to see if there is an MMI update for your vehicle. If not, then the main head unit (07) may be faulty, since the settings are stored there.

According to Hitachi themselves, there is no such set with model number C29-F100. The closest one they have on file is the C29-F800. Perhaps your set is an over-seas set, originally sold in Japan? The original remote has a MENU button surrounded by 4 "arrow" buttons - arrow up, down, left and right. For the C29-F800, using the original remote, press the MENU button 4 times or the SETUP button once. There should be 4 choices on that page and the first one, the one on top, is LANGUAGE. Highlight the first one using the "arrow down" (also labeled P-) button and select the language ENGLISH using the left or right arrow buttons. Exit the menu by pressing MENU 3 more times or SETUP once. I believe I can download the owner's manual for the C29-F800 and send it to you if you need it.