Question about Proform 775 Crosstrainer Treadmill - Free Silver Service Delivery!

1 Answer

Treadmill LED Track does not go to start with key inserted

Proform 765 EKG - insert the safety key and the machine does not reset to start.

Posted by on

  • Anonymous Mar 29, 2014

    When safety key is inserted, display continues to read insert key on precor9.25

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I pulled the safety switch out, and the elevation is stuck on 10 degrees

Posted on Jan 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Proform 520 ZN came with no key, how to start?


THIS IS KINDA ODD SINCE ALL TREADMILLS HAVE A SAFETY KEY. PLEASE CONTACT CUSTOMER SERVICE AT THE NUMBER THAT IS ON YOUR USER MANUAL OR CALL 1-888-533-1333.

Oct 21, 2014 | Proform Pro-Form 520 ZN Treadmill

1 Answer

I have a Proform 625 treadmill that I had to move. I unplugged the unit, slid it to where I needed it to go and plugged it back in. When I did so, the console powers on, but the display flickers and the...


You can try the following:
a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor
is plugged into a properly grounded outlet (see page 9). Use only a single-outlet surge suppressor
that meets all of the specifications described on page 9. Important: The treadmill is not compatible
with GFCI-equipped outlets.
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.
c. Check the circuit breaker located on the treadmill
near the power cord. If the switch protrudes as
shown, the circuit breaker has tripped. To reset the
circuit breaker, wait for five minutes and then press
the switch back in.
d. Check the on/off switch located on the treadmill near
the power cord. The switch must be in the on posi-
tion

Nov 25, 2013 | Proform 625 Front Roller Model Pftl62510

1 Answer

I cannot get it to incline. It will say it goes from .5 to 10 and not incline at all


First perform an incline calibration. The procedure is outlined in your users manual.
It is a simple procedure. Insert the safety key and start the machine in motion. Press the incline up button. While the numbers are increasing remove the safety key.
Now reinstall the safety key, the machine should incline to maximum then lower back down to minimum.
Now you can operate the treadmill, the incline should work.

Jan 04, 2011 | Proform CrossTrainer Treadmill

1 Answer

Using a friends for the first time. After powering up, it ask for a key. Where will I find the key and its insert area?


The "key" is inserted in the front of the panel and attaches to your wrist or clothing. It is a safety device that will shut off the treadmill of you fall down or off. If it ins't with the machine then you might be able to obtain a repacement from the manufacurer on-line.

Dec 29, 2010 | Proform 490 C Treadmill

1 Answer

My proform treadmill turns on and the inlcline works however the belt does not move. Any suggestions?


Enter calibration mode and do a calibration first.
Press the stop & speed up key, insert the safety key/magnet. Press stop 1 more time. Press speed up, the speed display should start to increase in value. By 30-40, the motor should be running. If not, you either need a motor or motor controller PCB. What model is the treadmill?? PCTL???

Dec 14, 2010 | Proform Exercise & Fitness

2 Answers

Proform 765 EKG


If I understand correct, the treadmill will not run correct unless you have the safety key in. Well yes this is correct because once the safety key is removed the treadmill will stop. If your treadmill is running extremely fast just by turning it on, you may need a new speed sensor. www.AtlantaFitnessRepair.com

Aug 10, 2009 | Proform Sport 1000 Folding Treadmill...

1 Answer

Treadmill Speeds Up Automatically


you might have it on a preset workout....i would read the instructions and find out how to put it on manual

May 19, 2009 | Proform 810 TR Treadmill

Not finding what you are looking for?
Proform 775 Crosstrainer Treadmill - Free Silver Service Delivery! Logo

Related Topics:

419 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proform Exercise & Fitness Experts

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

128 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

297 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Proform Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...