I have a ESA EF402E 20" TV and I use it to play xbox 360..i lost the remote for it, and I switched back to the regular cable channels on the tv, and I can't get back to the Video/Input now..how do you do it without a remote?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have a 19" ESA. The Charter Code didn't work, so my sister suggested we go through all of the codes (for all the TV's). Thankfully, we didn't have to go past the A's. The code that worked for us was 052.
I asume your game systems and dvd player are hooked up via the rca inputs.So all you would need to do is purchase a universal remote,program it for your tvand press ch00 which should be the video input.make sure your dvd or game system is on so you know if you are on the right channel
OK Listen Up! `=] I found the solution to everyone's problem.
Got to this website and click on the brand name of your universal remote (Philips, RCA, whatever).
Next, download the corresponding file with all of the remote codes. This will be a great help. It comes with all of the universal codes for most TV sets, and also instructions on how to setup and install the remote code.
But, remember....you must be patient. The PDF file is very huge so the remote code is not going to jump out at you and shout "HERE I AM!". You have to READ and look for it.
The way I found my universal code was by pressing the channel up button (over 300 times, literally) until the channel on the tv changed. That is what the instructions told me to do, and that's what I did. So, when all else fails, just FOLLOW DIRECTIONS! I know it may be long and painful, but trust me it was worth it! I got my remote control to finally work!
- By the way, sorry for the long reply. I tend to babble a lot. `=]
I own a One-for-All universal remote (model URC-4220) , and my booklet says the setup code for an ESA TV ( without a built-in DVD or VCR) is 0171 or 0812. I can not guarantee these numbers will work with your remote, but it is worth a try.
The alternative choice, is to purchase the same remote that I have, which cost less than 10 dollars at Walmart.
TRY the SAMSUNG codes , if it doesnt work then go to this website to purchase a remote control that might work for your tv . www.ebay.com and write " ESA remote control ' you will find there a couple of units that might be suitable for your TV.
HOPE THIS HELPS
I got mine off of game mode by using a universal remote. I had to type in a channel, (03) and it got it out of game mode, but I now have the problem of not being able to get it back into game mode so that I can use my DVD player. Good luck