Question about Hawking Hi-Gain Wireless-G (HWU8DD)

Open Question

Alternating connect - no-connect

I have access to network, and can connect. it connects then disconnects every second, and repeats. no stable connection.

Posted by on

  • elfking01 May 14, 2009

    the signal is strong, about 75%, and other computers can connect without issues.

×

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Riziel
  • 116 Answers

SOURCE: Help setting up hwr54g as an access point

Yes there is an easier way! Just setup the router as you would any normal setup. Follow the directions to set it up for the first time. What you want to do is have the put in all of your information that you need for it to communicate with your Modem. This will automatically place the router onto your network. Now the part that I believe you want is for this to be secure! Well setup either a WEP or WPA these are both encryption Protocols that will denie access to anyone other than you or someone you allow to access your network wirelessly.
You do not really have to go through all of the trouble of setting up specifics. As long as the two devices communicate the router and the modem will do the rest. I do this everyday in my daily work day! Anymore quesitons please feel free to ask!

Posted on Nov 28, 2007

Ad
  • 1 Answer

SOURCE: hawking extender hangs

They just issued new firmware: http://www.hawkingtech.com/support/details.php?CatID=32&FamID=105&ProdID=394#Firmware

You might try that...

-Tom-

Posted on Dec 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't configure the network with ethernet cable


Hey, you're almost there. The connection between the no-wireless PC over ethernet to the DAP-1360 Repeater is fine. The reason it can't connect to your LAN or the internet, however, is that the repeater isn't actually repeating your Ofir network, it is instead creating it's own, completely isolated wireless network (Ofir_EXT).


The D-Link setup and documentation is confusing, and doesn't have proper instructions for the repeater setup.


Rerun the setup wizard, setup as a repeater, then select manual configuration method.


Now, enter the wireless network name of your the network you want to extend (in this case, Ofir). Then enter the same security and password etc. for Ofir in the following fields, just like you were connecting to Ofir from a smartphone or laptop.
Once that is finished, you should be up and running. If things worked, you should NOT see any new wireless network. There should be Ofir and just Ofir. Wireless repeaters work invisibly, you'll still connect to the same network like you always did, but now it will have much improved range thanks to the DAP-1360. The computer entherneted to it should be networked on the wireless LAN and have internet access after this as well.



Good luck, I hope my instructions were clear. Wifi networking is easy, it's understanding all the manufacturers less-than-intuitive software that makes it hard.

Oct 16, 2012 | D-LINK SYSTEMS DAP-1360 Wireless N Range...

1 Answer

Wnr834bv2 power light is sometimes on in amber, then blinking green and I keep losing connection


Try resetting and then reconfigure the router.
To RESET the Netgear, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash.Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = passwordYou can now change the default admin password and configurethe wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Jul 11, 2012 | NetGear WNR834B RangeMax NEXT Wireless-N...

1 Answer

I installed this router on repeater mode, connection to existing router and signal is perfect but have no access to internet... in the access router the internet access is perfect. please let me know how I...


this is from Encore-usa.com

How to use ENHWI-N3 / ENHWI-N34D / ENHWI-2AN3 / ENHWI-2AN34D / ENHWI-3GN3 as a Repeater?


  • For Advance Users, you can download this document.
  • The reason why people use a Encore wireless repeater is because some wireless remote client computers are out of range from the main network's access point (wireless router), or the wireless client is in the dead spot or the device you want to share to the network have no wireless interface card.

    The function of a wireless repeater is basically to extend the wireless signal coverage. Wireless repeater does not authenticate, screen, secure, connect to the internet, give IP address to clients, broadcast names, etc., these are the wireless router's job. Repeater only repeats what the main wireless router does to the wireless clients.

    Checklist:

    • You should know the wireless security type of the existing wireless AP/router, is it a WPA, WPA2 or a WEP?
    • The wireless security key, or password or passphrase of the existing wireless router
    • Your existing wireless router's SSID
    • We recommend that the existing network you are about to add the Repeater on have a DHCP server running and able to lease IP address to all network clients. If you are not sure about this, please ask your ISP or the person who installed your network.

    Hardware Checklist:

    • Computer with wireless device turned off. This is only to set up the repeater, once finished the wireless can be turned on again.
    • The computer must have an available RJ-45 network interface card and web browser installed.
    • A working wireless router or Access Point with one available RJ45 port
    • RJ-45 UTP/TP Ethernet LAN Cable
    • The Encore Router is set to factory default. If your Encore Router is brand new and just pulled out of the box, no need to reset. If changes were made to any settings to the Encore Router before, make sure you "hardware reset" the Encore Router to the factory default settings. Check the User's Manual on how to "hardware reset" the router.

    PROCEDURES:
    1. Hooking up hardware connections:

    1. Both PC or Laptop and the Encore Router should be turned-on.
    2. Disable the wireless client from your PC or laptop computer (if not done so)
    3. Connect the Ethernet cable to the PC or laptop computer and the Encore Router. (This can be done while PC computer and router are turned on.)
    2. Switching mode from AP Mode to Repeater Mode
    1. Using your computer's web browser such as Internet Explorer or Safari Firefox, enter 192.168.0.1 to the address field then hit enter. You should see the Encore Router's User Interface screen still in the AP Router Mode
    2. On the upper right corner of the user interface menu, click on the drop down menu and select "Repeater Mode". Click the "OK" button to the warning box. Wait around 35 seconds until your screen comes back to Encore user interface screen, this time the screen is now in the Repeater Mode. If for some reason you were asked by the repeater to enter the username and password, enter the default username and password (admin/admin) and your Encore Router is now in Repeater Mode.

    NOTE:
    As of this moment your repeater is not connected to any router or network. It has to be configured further to be able to be connected to your current network and access point router.
    3. Connecting your Repeater to your existing network access point or router:

    1. As soon as the Encore Router switched to the Repeater Mode, you should be able to see the same Utility Screen with fewer selections on the left pane.
    2. From the Main Menu screen click on "Wireless" located on the left pane.
    3. Click on "Site Survey" button, a new Window dialogue box will pop up showing a list of Access Points reachable by your Repeater
    4. Check your existing network's access point SSID then click on the radio button that corresponds to your access point router then click "Connect" button.(If you can't find your existing AP router, click on "Refresh" repeatedly until your access point show up, or your location is too far from your existing AP router).
    5. Click on the "Encryption" drop down menu, select your existing access point wireless security, enter your existing router's wireless security key or passphrase then click "Apply". If you get a FAILED message, repeat this procedure again, a wireless hiccup might be interfering, otherwise you now have a working Repeater.
    6. Check your repeater connection by going to your internet browser and open a web page of your choice. If successful your new wireless repeater is working.
    7. Disconnect the Ethernet cable and setup your computer back to its original wireless settings. At this stage, the Repeater is now invisible to any wireless client computers. When connecting a new wireless client within the repeater's wireless range the process is the same as there is no Repeater device at all, the SSID of the wireless router will just be extended in range around where the Repeater is physically located.
    4. Connect your remote wireless client to your wireless router
    1. Using your wireless client utility program, look for your existing router's SSID and connects to it, if this is a new client you will be prompted with the wireless security key. Your repeater is invisible to all wireless clients. All it does is to repeat the wireless router signal as it is to extend its range. Once you have converted the Encore Router to Repeater and successfully connected to your existing router there will be no more configuration needed to the repeater. If you happen to see two identical SSID's of your existing router, this means your wireless client is within the same range of your existing router and the new wireless repeater, then your client don't need the repeater's service.

    NOTE:
    If you are using Windows 7 and your existing access point security wireless is set to WPA2 (AES), make sure your Windows 7 wireless security type properties is set to WPA2-Personal. To check go to Windows 7 Wireless Network Connection, look for your REPEATER router, right-click on it then click Properties, check the settings in the "Security" tab.>

    NOTE:
    When checking the wireless site survey, you may see two routers with the same SSID (names), these are your Access Point and the REPEATER tied together. This also means you are within the reachable range of both Access point and REPEATER.
    5. To check the Repeaters user interface

    At this moment, the Repeater is invisible to any client. The client's IP address is drawn from the DHCP server most likely to be also your wireless router. Therefore the IP address of the repeater is also invisible to the clients. Follow steps below:

    1. Disable wireless connection or turn off wireless in the client PC computer
    2. Connect Ethernet network cable to the RJ-45 port of the client PC computer
    3. Connect the other end of the Ethernet cable to one of the LAN ports of the repeater.
    4. From your computer, set the network card IP address to Static IP Address entering 192.168.0.102, Subnet Mask 255.255.255.0, leave the rest as blank.
    5. Open IE or Internet explorer or any other web browser software and run 192.168.0.1, you should be able to see the Encore Repeater user interface screen. (Changing any settings in the repeater may affect its performance)
    That should help :)
    Christopher

    May 15, 2012 | Encore Enhwi-2an3 Wireless-n Router

    1 Answer

    I have to reset (unplug power, wait 10 secs, then plug back in) a lot to have internet access. The router is recognized and it says that I am connected, however it also says that I have no internet...


    There are lots of factor why you have that kind of problem when it comes to your router. Before following the steps in this, check if your computer has a stable Internet connection when connected directly to your broadband modem. If you do not have a stable Internet connection with your modem, kindly contact your Internet Service Provider (ISP).

    May I know what is the model and version of your Linksys router?

    If you run into Intermittent Wired Connections Using a Router:

    Step1: Enabling MTU on the Router

    - Access the router's web-based setup page.

    - Open a web browser such as Internet Explorer.

    - Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].
    NOTE: If the IP address of the router has been changed, type the router's IP address in the Address bar instead.

    - A new window will prompt for a User name and Password. Leave the User name field blank then enter your router's password ("admin" is the default password), then click OK.

    - NOTE: If the password of the router has been changed, type the router's new password in the Password field instead.

    Step2: When the router's web-based setup page appears, look for MTU and set it to Manual. Enter the MTU value of your Internet connection in the Size field.

    1468. The size DHCP or cable providers prefer.

    1400. Maximum size for DSL.


    Step3: Save settings.

    ===================================================================

    If you run into Intermittent Wireless Connections Using a Router:


    Check if your wireless computers have stable connection when connected to other wireless networks.


    Regular wireless disconnection can be caused by different factors such as:

    > Wireless interference within the network.

    > Wireless settings of the Linksys router are still set to default.

    > Firmware is corrupted.
    ===================================================================
    NOTE: If the procedure does not work, needs to update the router

    Nov 05, 2010 | Linksys Wireless-G WRT54G Router

    1 Answer

    My wireless network connection status in connected speed is11.0 and my signal strength is good but I cannot connect to the internet


    Are you running any Internet Security software such as Norton? Also make sure your wireless router is actually connected to the Internet, just because your laptop is connected to the router doesn't mean the router is connected to the internet.

    If you can, plug your laptop in to the router via an ethernet cable to make sure Internet access is working, alternatively if you have another computer connected to the router check the internet access on that one.

    Also try doing a soft reset on the router, just disconnect from the power for about 30 seconds, reconnect, wait one minute then try again.

    Jun 26, 2010 | Computers & Internet

    1 Answer

    Can not access sitecom 300n with factory preset 192.168.0.234 or find trouble shoot in manual


    open Network Connectdisable the wlan adapter first. open Network Connections from Control Panel and disable the wlan adapter first.Then Open Properties of the (wired) LocalArea Connection. Scroll down to TCP/IP and Change the Properties: IP=192.168.0.2 and Subnet Mask=255.255.255.0. Then connect the Sitecom using the wire (UTP). You should be able to browse with an internet browser to 192.168.0.234 now. After setting up the Sitecom disconnect the wire and enable the wlan adapter again.

    May 15, 2010 | Computers & Internet

    1 Answer

    2170W wireless connection to mac computers


    My suggestion would be to connect an ethernet cable from the printer to the router. This is a more stable connection for the printer on the network.

    All of your wireless computers will be able to connect to it and print to it as long as they are connected to the network.

    To get the printer back in wired mode, you will need to reset the printer and network card of the printer.

    1. Turn off power
    2. Hold down go Button while switching back on
    3. Wait 2 secondes before letting go and press the go button 8 times quickly
    4. Wait for the unit to finish warming up
    5. Repeat steps 1 and 2
    6. Wait 2 secondes before letting go and press the go button 7 times quickly this time
    7. Wait for the unit to finish warming up then plug in the ethernet cable.

    Mar 28, 2010 | Brother HL-2170W Laser Printer

    1 Answer

    Keep getting 800 error stating network error and it disconnects. ps3 is 2 feet from access point, 100% signal and I have reset modem twice and have a signal booster in the house?


    If you are using wireless connection that could be your problem. Wireless isnt to stable for connection, but it depends on your environment(where you live). You could have a slow internet connection in your environment.

    Aug 02, 2008 | Video Game Consoles & Games

    1 Answer

    Connecting one network to another?


    This is what I would do I would connect the wireless to the internet direct and allow all PC with wireless capabilities to access the net through that wireless irrespective to where I place the wireless router.  Alternative I would link the cable on on the second floor the one you use for the PC to access the net to access the the wireless it should automatic allocate IP addresses as each machine accesses the network.  The speed of that wirless is decreased as each wireless PC comes on line.

    Oct 26, 2007 | Efficient Networks SpeedStream 5200 Modem

    Not finding what you are looking for?

    Open Questions:

    Hawking Hi-Gain Wireless-G (HWU8DD) Logo

    Related Topics:

    133 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hawking Computers & Internet Experts

    yadayada
    yadayada

    Level 3 Expert

    76070 Answers

    WTF Chuck.....
    WTF Chuck.....

    Level 3 Expert

    386 Answers

    Steve

    Level 3 Expert

    3287 Answers

    Are you a Hawking Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...