Question about Hitachi 57F510 57" Rear Projection HDTV-Ready Television

2 Answers

Defective remote? A Techie friend set up the DTA800 for me & it was working ok for 3 months, I clicked on the info button, & the whole thing got messed up. Now nothing works, I tried reprogramming it & I cant get anything to work. The remote w/ new batts wont turn on the TV--is it supposed to, or only after it is programmed to the converter box? I dont have a clue what to do next. I bought this @ Walmart & no one there can help me. Should I return it? have there been any problems others have had w/ these Converter Boxes being defective?

Posted by on

  • tyetoozi May 15, 2009

    you cant even reach anyone@ the RCA1800 customersupport.com to get help w/ setting up their converter box. What brand do you recommend as being more reliable than the RCA?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 3,866 Answers

Yes your going to need to take that back there has been issues with that converter box and remote so yes wlmart has a fantastic 90 days no questions asked return policy so please do yuorself a favor not that this easy a easy way out for me its not as there is not much more diagnosis then that.

Posted on May 14, 2009

  • Grand Canyon Tech
    Grand Canyon Tech May 15, 2009

    Bitstream works good try them they sale them at radioshack wonderul product!!

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

If you are past your warranty, you can call RCA themselves at 1-800-506-5746 and they can sell you a new remote for your box (model# DTA 800) for $20.00 including shipping and handling.

Posted on Jun 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't find the codes for my emerson tv codes for


Instructions
    • 1Remove the battery cover and insert new batteries into the remote. Press the "Power" button on the television to turn it on.
    • 2 Press the "PRM" button that is in the lower left corner of the remote control. You should see the signal indicator light come on.
    • 3 Click the DTA800 TV Codes link in the resource section to view a list of program codes for the converter box. Enter the 3-digit code for your television by pressing the number keys on the keypad. Press the "OK" button when finished. You should see the indicator light turn off.
    • 4 Point the remote at the television and press the volume keys on the remote control. If the volume for the television changes, the remote has been programmed successfully.
    • 5 Enter another 3-digit code for your television if the first code fails to program the remote
    • CODES : Emerson
      • The RCA Universal Remote has 17 different codes for Emerson televisions. These codes are 011, 026, 027, 028, 029, 030, 031, 032, 037, 042, 053, 064 065, 067, 075, 076 and 079. There are 18 different Emerson VCR codes. These codes are 008, 009, 010, 013, 015, 020, 023, 027, 034, 041, 042, 047, 057, 062, 065, 067, 068 and 070. There are no codes for Emerson cable boxes.


      Hope this helps. =)

Sep 30, 2014 | Televison & Video

1 Answer

Rxv-571 wont power on, no click sound either


Good for you. You are a real techie.

Jul 04, 2014 | Yamaha RXV571

2 Answers

Nokia 2700 model not swiching on


brother the power ic of your phone is defect on your problem or if you can just read at this site if you want to but for me its the same problem of what my friend just hade last month...... http://www.mobilefile.info/2700c-power-button-not-working-solution/

Mar 25, 2011 | Nokia Classic 2700 Cell Phone

1 Answer

Whereas I used to have at least several friends listed on my Facebook Home page (including two of my sisters), now there is only one. When I tried to search for friends from those I email frequently...


Hi,

Please check the following settings.

1. Go to control panel and open internet options.
2. Click on connections tab on the top.
3. Click on the button says LAN settings.
4. Make sure none of the options should be checked.
5. Click on ok and ok again.

If this doesn't solve the issue then please download the following anti malware tool and run a scan.

http://www.filehippo.com/download_malwarebytes_anti_malware/

Regards,

Rashish Sharma

Mar 25, 2010 | Computers & Internet

1 Answer

The remote actions things twice with one button push


technically we call it debouncing it causes due to the faulty microprocessor in remote also it can happen due to faulty carbon contacts of remote below buttons.the solution to this is to replace remote but before that do one thing 70% THIS WORKS open ur remote then take a dry cloth & clean the surface below buttons if u r lucky then remote will be OK

Mar 14, 2010 | Logitech Harmony 550 LCD Remote Control

1 Answer

REMOTE CONTROL CAME WITH THE DTA800. PUT IN ALL


I CALLED THERE 800 NO. THERE ARE ONLY 4 CODES FOR MY TV IF NON WILL WORK IT. CAN'T BE DONE.HAVE TO USE BOTH REMOTES OK THANK YOU

Jan 08, 2010 | RCA Televison & Video

4 Answers

I want to restart my whole phone [sidekick slide]


Make sure battery is minimum 25% charged !! 1. Switch phone off 2. Take out battery and re-insert it 3. Hold the letter r and power on button 4. Phone will start and loading picture will appear on screen 5. Phone will restart again 6. Now let go of the r and power button This will remove privacy lock and reset to original factory settings.

Jun 14, 2009 | T-Mobile Sidekick

3 Answers

Cannot control Vip222 with sling classic


I have read elsewhere that Slingboxes required the Dish Network receivers to be set to Primary Remote Address 1.

To try a fix:

Using the Dish Network Remote Control -
1. Press menu 2 times to get to system info page
2. In the system info page the Primary Remote Address is in a white box (bubble) followed by a Green TV (1)symbol that says IR and indicates the channel to which remote control 1 is configured.

If the Primary Remote Address of your Dish VIP722 Remote control 1 is not set to channel 1, here is how to change it:

1. While displaying the system info page, press and hold the SAT button on your dish network remote until all other modes are flashing, about 3 seconds.
2. then press the '1' button on the numeric pad of your dish remote
3. then press the '#' button on the numeric pad of the dish remote
4. then press the 'record' button (red dot button - stores setting)
5. At this point you should see a number 1 in front of the primary remote address on the dish system info page

Ensure you enter the corresponding IR code into your slingbox remote control per the instructions in the Slingbox documentation.

Feb 05, 2009 | Sling Media Slingbox AV Remote Control

1 Answer

I have a ILO TV and need the codes for a RCA DTA800 converter


Already found solution with codes from Orian that worked.

Thanks

Jan 04, 2009 | Hitachi 57F510 57" Rear Projection...

1 Answer

Digital TV Converter keeps shutting off


The DTA800 has a Power Saver feature that turns the unit off after 4 hours if it is idle (no volume or channel changes).

Press MENU button, press #5 (Setting/Configuration), press #3 (Power Saver) Select OFF to de-activate this feature (no Power Saver).

This is covered on page 11 of the DTA800 user manual.

Apr 25, 2008 | Televison & Video

Not finding what you are looking for?
Hitachi 57F510 57" Rear Projection HDTV-Ready Television Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2336 Answers

The Knight
The Knight

Level 3 Expert

75311 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...