Question about Eiki LC-XG110 Multimedia Projector

2 Answers

Eiki LC-XG110 lamp going off

Projectors powers up with Ready and Lamp lights on. Lamp light is red. Counts down from 30 seconds then image displays for about 20 seconds. Ready light goes off, lamp light stays red, image disappears, fan speed increases. After about 30 seconds the fan slows down and the Ready light comes on again.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,236 Answers

The lamp may be at the end of it's life.

Posted on Nov 18, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 205 Answers

Lamp is near end of life. Try reseting lamp timer and order new lamp if unit stays on

Posted on Jul 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Eiki lc-nb3s projector... fan comes on but no lamp then fan shuts down after about 5 seconds. Green "Ready" light and Red "Lamp" light are on... Have tried the reset button and cleaning the filter... no...


Please check on of these solutions :

1:Remove the lamp from the projector. Ensure that it has no cracks, discoloration or "smoky" appearance.

2:Try removing and reseating the lamp, or to try another lamp.

3:Reset your lamp timer. Most projectors have no way of knowing if you physically have replaced your lamp. They rely on the user resetting the lamp timer

4:Pull the lamp back out of the unit, give is a brisk shake and reseat the lamp. Occasionally there is some buildup on the lamp contacts or filament during manufacturing.

5:Are the input and output vents blocked or obstructed in any way?

6:Are the filters dirty or clogged? Most manufacturers will recommend filter cleaning on a monthly basis depending on usage

7:Remove any extension cords, power strips and/or surge suppressors. Many current model projectors will not even try to ignite the lamp if they detect drops or fluctuation in voltage supplied to the unit. This is a safety feature to reduce stress on the lamp.

PLEASE DON'T FORGET TO RATE !

Mar 22, 2010 | Eiki Office Equipment & Supplies

3 Answers

Sanyo PLC-XU33 image displayed for 10 seconds then turns off


Owner decided to upgrade to a newer projector. Lamp was too expensive.

May 07, 2009 | Sanyo PLC XU33 Multimedia Projector

1 Answer

EIKI LC-XNB4MS POWERS ON AND FANS START FOR 15 SECONDS AND THEN O


the lamp is near the end of it's life. time to replace it.

Mar 20, 2009 | Eiki LC XNB4 LCD Projector

1 Answer

My projector doesn't stay on. what's wrong?


either the lamp cannot strike (meaning a ballast or lamp issue) or there the fans are not up to speed to sufficientl;y cool down the lamp and therefore shut down to avoid damage.

Feb 27, 2009 | Eiki LC-XB20 Projector Multimedia...

1 Answer

The projector switching off after 30 seconds


check the following :
1.does the lamp glow
2.do u get the connected image
3.if yes does the screen show temperature or overheat
4.if yes then one of the cooling fans do not work properly & hence the unit turns to standby & goes into protection
if no 1 does not happen, then check the lamp physically,it should not show melted or breakage.
if the lamp seems ok, then the ballast is defective!

Feb 08, 2009 | Eiki LC-SD15 SVGA LCD Projector Multimedia...

1 Answer

Its not the lc-sb20 but the lc-nb3e


Hi there

This sounds like a common Ballast ( lamp's power supply ) problem.

Only way to rectify this is by replacing the faulty Ballast.

Sep 08, 2007 | Eiki LC-SB20 Projector Multimedia...

Not finding what you are looking for?
Eiki LC-XG110 Multimedia Projector Logo

Related Topics:

884 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eiki Office Equipment & Supplies Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

color wheel light...
color wheel light...

Level 2 Expert

138 Answers

Jerry Kramer
Jerry Kramer

Level 3 Expert

3904 Answers

Are you an Eiki Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...