Dvd player is making a ticking noise when I try to play a dvd or cd. any idea what the problem is?  the load message stays on.

1.The DVD Drive makes two-three times noise than stop spin the media CD or DVD.
-Bad DVDRW Drive.
2 The drive does spin CD-DVD but doesn't load.
-. Bad NDMi PCB VEP79180 or VJB79180
3. Drive spinning but don't load CD or DVD
More chance Bad Drive or Problem with drive PCB.
Open top Cover of drive, open tray, close tray.
If laser flashed but doesn't play CD-DVD more chance bad drive PCB
Check: avsystemparts.com

If it loads normally I would not worry about, keep in mind they use more plastic than metal and noise on loading is more evident.

• You may have some dust blocking an optical sensor that detects the door being closed. Try to blow into the door area with the tray open, either with your breath or with compressed air.
• You can also try unplugging the player for 1 minute and plugging it back in to see if that fixes it.
• Try a different CD. The DVD player may not like the CD you are trying to play or the CD might be dirty.
• The DVD player might just be broken.

Have you changed programs that you use to burn VCDs?
(Perhaps the program was updated?)

Perhaps trying a different program to make the VCD will work for you.

Also; when is the last time you cleaned the DVD player lens?

dvd player s-video pin use to tv tuner card

Try inserting a cd, almost all dvd players can play cds as well, if it displays the same message you may very well have a defective dvd player, if it plays then you may have a damaged disc. If it plays the cd try a mint condition dvd; also, I'll assume that you know better but in many cases if the dvd player is not defective users are simply loading dvds in upside down. If all this fails return your dvd player to the store or check the warrenty.

I hope this helps, good luck

please change laser unite then solve your problem

Wont play CD DVD, ETC

I have just copied a video to a dvd on my samsung dvd-vr355 and finialised the disc with a title now it will not play any disc,even if it is. shop bought, just says loading then the dvd opens to reject the disc. please help

I would certainly take the unit back cause that noise could be the tracking or focus coils making that noise as they are being overdriver. This could cause the unit to fail prematurly. Its not an adjustment that you can do your self, it takes special equipment and disc