Question about Vinpower Digital U-Print CDP78 Printer

1 Answer

Uprint cd/dvd printer is not recognized by computer

I get a "reset printer" message when I try to print with my Uprint cd/dvd printer - which has worked in the past. Then it tells me the printer is either off or not connected to the computer. I have uninstalled and reinstalled the software but to no avail. Any suggestions?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 174 Answers

Yes same was happening to me. just press the start botton down unplugg usb & current cable keep holding the start botton replugg usb and currentcable keep holding untill you will hear a sound more or less 2 minutes. than the computer will ask you for new installing your programm you do so and here we go it works as new!!

Posted on Feb 06, 2012

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bandana_gyrl
  • 181 Answers

SOURCE: Reinstalling the driver as you suggest

You should always uninstall the software first if you are having software issues as a file may be corrupted and they do not always overwrite.

Posted on Aug 07, 2008

Hamedo
  • 57 Answers

SOURCE: Why can't I Uninstall Hp2610 software for Reinstall?

Hi all of you
to uninstall you have to clear the bended print job, then go to Add/Remove.
hope this helpful for you,
thanks

Hamedo

Posted on Nov 19, 2008

micromaster
  • 3614 Answers

SOURCE: software will not allow the reinstallation for my

Hi there,

Download drivers and software on the HP support page that I will paste here below.

Download drivers and software

http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=391181

Hope this helps

Posted on Dec 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer not responding to print message order


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print a document again to verify that the problem is fixed.

Sep 12, 2011 | Lexmark X2600 InkJet Printer

1 Answer

Cannot Scan Document into my computer after doing the following: click scan; click download to computer; clicked OK; receive message Downloading Application; then receive message cannot retrieve...


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print/scan again.

Aug 24, 2011 | Lexmark X4690 Wireless InkJet Printer

1 Answer

"Communication Not Available" message is displayed


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Unplug and re-plug the printer into the power source to reset it.

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list again, then try to print again.


You may also try to update your printer driver by visiting the Lexmark website at . Select your operating system, download and execute the file.


If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

Aug 16, 2011 | Lexmark X2670 All-In-One Printer

1 Answer

I get a message "


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print again.

Aug 08, 2011 | Lexmark Z816 InkJet Printer

1 Answer

I need to find win 7 driver software for my Uprint CD/DVD printer


check the homepage of vinpower try first to install. thats what the company recomend which should be responsable. but it is not working or better not true. my recomandation is take your xp programm convert it to vista or 7 i did it you can if you want. i have to search windows experts which made those programs they told me what to add and what to take. iam using windows vista as well . so there is ways. you have not to change the sistem for using the uprint

Jun 30, 2011 | Vinpower Digital U-Print CDP78 Printer

1 Answer

WHERE CAN I GET INSTALLATION SOFTWARE FOR UPRINT CDP78


go in the vinpower homepage they are the uprint sellers and responsable once

Jun 20, 2011 | Vinpower Digital U-Print CDP78 Printer

1 Answer

Digital U-Print CDP78 Printer: TRYING TO INSTALL PRINTER AND IT ASK FOR THE PRODU...


hi, again vinpower is actualy responsible for this problems and programs they should give answers to anyone which bought this equipment solutions. since it is sold unique in usa by them as i am informed.so if you lost or dont have the frontsheet anymore where the product key shows please contact vinpower.com they might give you another key if you need to install.but let me guess another reset problem, without reset you can not install anymore anything the computer will not regonice your uprint!!!!! greetings

May 15, 2010 | Vinpower Digital U-Print CDP78 Printer

1 Answer

The epson printer driver dealing with cd printing is not installed


is there an ok button on that error message? if so just click on OK button and click on a button says manual.
It will let you check on the settings on the printer. paper size should be A4.
on print settings it should let you select on cd/dvd

Note: this only works if you have installed the epson easy print from the epson.com website of your printer model

Feb 07, 2009 | Epson Stylus Photo R200 InkJet Printer

1 Answer

Stops printing cd half way


It seems your printer cannot seem to recognize the CD tray. Purchase another CD tray. You can try compassmicro.com.

Feb 07, 2009 | Epson Stylus Photo R300 InkJet Printer

Not finding what you are looking for?
Vinpower Digital U-Print CDP78 Printer Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vinpower Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75030 Answers

Are you a Vinpower Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...